LEONLITE 28W LED Security Light with GFCI Outlets Instruction Manual

1. Introducció i finalview

Thank you for choosing the LEONLITE 28W LED Security Light with GFCI Outlets. This product is designed to provide reliable outdoor illumination with enhanced functionality, featuring motion sensing, dusk-to-dawn operation, and integrated GFCI protected electrical outlets for convenient power access. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance.

2. Informació de seguretat

WARNING: Risk of Electric Shock. Turn off power at the fuse box or circuit breaker before installation. Only use on 120V/60Hz circuits.

• This product is rated for wet locations. Do NOT use where direct water exposure occurs, as this can lead to electric shocks.
• Do NOT use this product near any source of heat.
• Mantingueu aquest producte fora de l'abast dels menors de 3 anys.
• Assegureu-vos que totes les connexions de cablejat siguin segures i que compleixin els codis elèctrics locals.

3. Contingut del paquet

The LEONLITE 28W LED Security Light package includes:

• 1 x Llum de seguretat LED
• 1 x Mounting Hardware Kit (including mounting bracket, screws, and wire nuts)
• 1 x Manual d'usuari

4. Característiques del producte

• Endolls GFCI dobles: Two built-in Ground Fault Circuit Interrupter (GFCI) outlets provide safe and reliable power for outdoor tools and appliances, eliminating the need for additional wiring or wall outlets.
• Dos modes d'il·luminació: Choose between Motion Sensor Mode (light activates at night when motion is detected) and Dusk to Dawn Mode (light remains on throughout the night and turns off automatically during the day).
• Il·luminació ajustable: Features 2500 lumens brightness from 28W LED, with adjustable lamp heads and a motion sensor that can be positioned for optimal coverage.
• Wide Detection Area: The motion sensor offers a 150° detection angle and a sensing range of 13ft to 45ft, suitable for various yard sizes.
• Configurable Delay: Set the light to stay on for 30s, 60s, or 120s after motion is no longer detected.
• Durable and Certified: ETL certified for quality and safety standards, designed for wet locations.

5. Configuració i instal·lació

Follow these steps for proper installation. It is recommended to have a qualified electrician perform the installation if you are unfamiliar with electrical wiring.

1. Apagueu l'alimentació: Before starting, ensure the power to the installation area is OFF at the circuit breaker.
2. Preparació de la superfície de muntatge: Remove any existing fixture and ensure the electrical box is clear.
3. Instal·leu el suport de muntatge: Secure the provided mounting bracket to the electrical box using the screws.
4. Connexions de cablejat: Connecteu els cables de l'aparell al cablejat de la vostra llar:
   • Connecteu el verd cable (de terra) des del dispositiu fins al copper or green ground wire from the electrical box.
   • Connecteu el blanc cable (neutre) des de l'aparell fins a la blanc neutral wire from the electrical box.
   • Connecteu el negre cable (calent) des del dispositiu fins al negre hot wire from the electrical box.
   Use the provided wire nuts to secure all connections.
5. Adjunta l'aparell: Carefully push the wired connections into the electrical box and secure the light fixture to the mounting bracket.
6. Ajustar Lamp Heads and Sensor: Adjust the two lamp heads and the motion sensor to your desired angles. The lamp heads are adjustable up to 320° horizontally and 120° vertically. The sensor is adjustable up to 170° horizontally and 140° vertically.
7. Restaura l'alimentació: Torneu a encendre l'alimentació a l'interruptor.
8. Test GFCI Outlets: After powering on, press the 'RESET' button on the GFCI outlets to activate them. Press 'TEST' to ensure they trip, then 'RESET' to restore power.

Imatge: Wiring diagram showing connections for hot, neutral, ground, and control wires to the GFCI security light assembly.

Imatge: Diagram illustrating the adjustable range of the two lamp heads (320° horizontal, 120° vertical) and the motion sensor (170° horizontal, 140° vertical).

6. Instruccions de funcionament

The security light offers two primary operating modes and adjustable settings for optimal performance.

Selecció del mode

Use the control switches located on the bottom of the motion sensor to select your preferred mode and adjust settings.

Imatge: Close-up of the control switches for adjusting time delay (30s/60s/120s/TEST) and sensitivity (M/H/L) on the motion sensor.

• Mode sensor de moviment: The light remains off during the day. At night, it activates when motion is detected within its sensing range and angle.
• Dusk to Dawn Mode (D2D): The light remains on throughout the night, regardless of motion detection, and automatically turns off during the day.

Ajust de la configuració

• Temps de retard: Adjust the switch to set how long the light stays on after motion is no longer detected: 30s, 60s, or 120s. A 'TEST' mode is available for initial setup.
• Sensibilitat: Adjust the switch to control the motion sensor's sensitivity (Low, Medium, High).

Punts de venda GFCI

The built-in GFCI outlets remain powered at all times as long as the main switch is on, regardless of the lighting mode or whether the light is on or off. Remember to press the 'RESET' button on the GFCI outlets after powering on to activate them.

Imatge: The LEONLITE security light illuminating a patio area at night, highlighting the convenience of the built-in GFCI outlets for powering outdoor appliances.

7. Manteniment

• Neteja: Clean the fixture regularly with a soft, damp cloth. Do NOT use abrasive cleaners or solvents.
• Prova GFCI: Test the GFCI outlets monthly by pressing the 'TEST' button. The outlet should trip, cutting off power. Press 'RESET' to restore power. If it does not trip, the GFCI may be faulty and should be replaced.
• Inspecció: Inspeccioneu periòdicament l'aparell per detectar qualsevol signe de danys, cablejat solt o desgast.

8. Solució De Problemes

9. Especificacions

Imatge: Detailed dimensions of the LEONLITE 28W LED Security Light, including measurements for the light heads, sensor, and main body.

10. Garantia i Suport

This LEONLITE product comes with a generous 3-year warranty, ensuring top-notch quality and safety standards. For any support or warranty claims, please contact LEONLITE customer service through their official channels.