1. Introducció
This manual provides detailed instructions for the safe and effective installation of the Fricpart-054935 replacement water drain pump, designed for Kenmore washer model 110.24872300. Please read all instructions carefully before beginning the installation process. Proper installation ensures optimal performance and longevity of your washing machine.
2. Informació de seguretat
Always prioritize safety when performing appliance repairs. Failure to follow these safety guidelines may result in personal injury or damage to the appliance.
- Desconnecteu l'alimentació: Before starting any repair, always unplug the washing machine from the electrical outlet to prevent electric shock.
- Desconnectar el subministrament d'aigua: Tanqueu les vàlvules de subministrament d'aigua calenta i freda de la rentadora per evitar fuites d'aigua.
- Drenatge d'aigua: Ensure all water is drained from the washer tub and hoses before disconnecting any components.
- Utilitzeu equip de protecció: Use gloves to protect your hands and safety glasses to protect your eyes.
- Assistència professional: Si no esteu segurs de cap pas, consulteu un tècnic d'electrodomèstics qualificat.
3. Producte acabatview
The Fricpart-054935 is a direct replacement water drain pump for Kenmore 110.24872300 washing machines. It is responsible for expelling water from the washer tub during the drain and spin cycles.
This image displays the Fricpart-054935 replacement water drain pump. It is a light beige plastic unit with two cylindrical hose connections at the top and a central impeller housing. Four mounting tabs are visible around the base.
Components clau:
- Port d'entrada: Connects to the washer tub drain hose.
- Port de sortida: Connects to the discharge hose leading to the standpipe or utility sink.
- Carcassa del motor: Contains the electric motor that drives the impeller.
- Impulsor: The rotating component that creates suction and pushes water.
- Pestanyes de muntatge: Secure the pump to the washer chassis.
4. Configuració i instal·lació
Follow these steps to replace the water drain pump in your Kenmore 110.24872300 washer.
- Prepareu la rentadora:
- Unplug the washer from the electrical outlet.
- Tanqueu les vàlvules de subministrament d'aigua calenta i freda.
- Pull the washer away from the wall to access the rear.
- Place towels on the floor to catch any residual water.
- Accés a la bomba:
- Depending on your specific washer configuration, you may need to remove the front panel, rear panel, or tilt the washer back to access the drain pump located at the bottom. Consult your washer's original service manual if unsure.
- Locate the drain pump assembly.
- Desconnecteu les mànegues i el cablejat:
- Use pliers to release the clamps securing the inlet and outlet hoses to the old drain pump.
- Carefully detach both hoses. Be prepared for some water to spill.
- Disconnect the electrical wiring harness from the pump motor. Note the orientation for reassembly.
- Treure la bomba antiga:
- Unscrew any mounting screws or release clips that secure the drain pump to the washer frame.
- Remove the old drain pump.
- Instal·lar una bomba nova:
- Position the new Fricpart-054935 drain pump in the same location as the old one.
- Secure it with the mounting screws or clips.
- Reconnect the electrical wiring harness to the new pump.
- Attach the inlet and outlet hoses to the corresponding ports on the new pump, securing them with the hose clamps. Assegureu-vos clampsón hermètics per evitar fuites.
- Prova i muntatge:
- Before fully reassembling the washer, reconnect the water supply and plug in the power cord.
- Run a short drain/spin cycle to check for leaks and proper pump operation.
- If no issues are detected, turn off the water, unplug the washer, and reattach any panels removed during the process.
- Push the washer back into its original position.
5. Instruccions d'ús (després de la instal·lació)
Once the Fricpart-054935 drain pump is correctly installed, your Kenmore 110.24872300 washer should resume normal operation. The drain pump functions automatically during the wash cycle to remove water from the tub. No specific user interaction with the pump itself is required.
If the washer fails to drain or makes unusual noises after installation, refer to the Troubleshooting section.
6. Manteniment
The drain pump itself is generally maintenance-free. However, regular maintenance of your washing machine can help prevent future drain pump issues:
- Clean the Lint Filter: Many washers have a small filter near the drain pump that can collect lint and small objects. Refer to your washer's original manual for its location and cleaning instructions.
- Eviteu la sobrecàrrega: Overloading the washer can strain the pump and other components.
- Revisar les mànegues: Periodically inspect drain hoses for kinks, blockages, or damage.
- Feu servir el detergent adequat: Use only high-efficiency (HE) detergent in HE washers to prevent excessive suds that can hinder draining.
7. Solució De Problemes
If your washer experiences draining issues after installing the new pump, consider the following:
- Washer Not Draining:
- Comproveu la potència: Ensure the washer is plugged in and receiving power.
- Hose Kinks: Inspect the drain hose for any kinks or blockages.
- Pump Obstruction: Small items (coins, socks) can get past the filter and jam the pump impeller. Disconnect power and water, then inspect the pump's inlet for obstructions.
- Instal·lació incorrecta: Review the installation steps to ensure all connections are secure and wiring is correct.
- Unusual Noises During Drain Cycle:
- Objectes estrangers: A rattling or grinding noise often indicates a foreign object caught in the pump impeller. Follow safety steps to inspect and remove.
- Muntatge solt: Ensure the pump is securely mounted to the washer frame.
- Fuga:
- Mànega Clamps: Comproveu que tota la mànega clamps are properly tightened at both the pump and the washer connections.
- Mànegues danyades: Inspect hoses for cracks or tears.
If troubleshooting steps do not resolve the issue, professional assistance may be required.
8. Especificacions
| Atribut | Detall |
|---|---|
| Número de part | Fricpart-054935 (FRIC-PL-APP-TP-22052025-008062) |
| Compatible Washer Model | 110.24872300. Kenmore |
| Fabricant | Fricparts |
| Color | Black/White (as per product listing) |
| Quantitat de paquet d'articles | 1 |
9. Garantia i Suport
This Fricpart-054935 replacement part is manufactured by Fricparts. For specific warranty information regarding this replacement part, please refer to the seller's return policy or contact the seller directly. The installation of this replacement part does not extend or renew the warranty of your original Kenmore washing machine.
For technical support or further assistance, please contact the retailer or manufacturer of the replacement part.
