HillMiles Mile 1 Electric Bicycle User Manual

1. Guia de configuració

1.1 Desembalatge i inspecció inicial

Carefully remove all components from the packaging. Inspect the bicycle and all accessories for any signs of damage during transit. If any damage is found or parts are missing, please contact customer support immediately.

Els components esperats inclouen:

• HillMiles Mile 1 Electric Bicycle Frame
• Bateria de 36V 10.4AH
• Carregador de bateria
• Pedals (esquerra i dreta)
• Tool Kit (wrenches, hex keys)
• Manual d'usuari (aquest document)

1.2 Muntatge

Follow these steps to assemble your HillMiles Mile 1 electric bicycle:

1. Instal·lació del manillar: Loosen the stem bolts on the front fork. Insert the handlebar stem into the fork tube, ensuring it is aligned with the front wheel. Tighten the stem bolts securely.


Detailed image of handlebar installation, showing the stem being inserted and aligned.

2. Instal·lació de la tija del seient: Insert the seat post into the seat tube of the frame. Adjust the height to a comfortable riding position, then secure it with the quick-release lever or bolt.
3. Fixació del pedal: Identify the Left (L) and Right (R) pedals. The left pedal screws counter-clockwise, and the right pedal screws clockwise. Apply a small amount of grease to the threads and screw them firmly into the crank arms.


Detailed image of pedal attachment, highlighting the L/R markings and tightening direction.

1.3 Instal·lació de la bateria i càrrega inicial

Before your first ride, fully charge the battery. Slide the 36V 10.4AH battery into its designated slot on the frame until it clicks securely into place. Use the provided key to lock the battery if applicable.

Image illustrating the correct method for installing the battery into the bike frame.

Connect the charger to the battery charging port and then to a standard wall outlet. The indicator light on the charger will show charging status (e.g., red for charging, green for fully charged). The initial charge may take 6-8 hours.

Image demonstrating how to properly connect the battery charger to the bicycle's charging port.

2. Operating Your HillMiles Mile 1

2.1 Engegada/apagada

To power on the bicycle, ensure the battery is installed and locked. Press and hold the power button on the display unit (usually located on the handlebars) for a few seconds until the screen illuminates. To power off, press and hold the same button until the display turns off.

2.2 Funcions de visualització

The LCD display provides essential riding information:

• Velocitat: Current riding speed (km/h).
• Nivell de bateria: Indica la càrrega restant de la bateria.
• Nivell d'assistència al pedaleig (PAS): Mostra el nivell actual d'assistència motora (0-5).
• Comptaquilòmetres/Distància del trajecte: Displays total distance traveled or current trip distance.
• Indicador de fars: Shows if the headlight is on.

Use the '+' and '-' buttons on the display to navigate through different information screens or adjust settings.

2.3 Sistema d'assistència de pedals (PAS)

The HillMiles Mile 1 features a Pedal Assist System (PAS) with multiple levels. When you pedal, the motor provides assistance based on the selected level. Use the '+' button to increase assistance and '-' to decrease it. Level 0 provides no assistance, while higher levels provide more power, making pedaling easier.

2.4 Frenades

The bicycle is equipped with front and rear brakes. The right lever typically controls the rear brake, and the left lever controls the front brake. Apply both brakes simultaneously for effective and safe stopping. Avoid sudden, hard braking, especially with the front brake, to prevent skidding.

2.5 Riding Safely

Always prioritize safety when riding your electric bicycle:

• Always wear a helmet that meets safety standards.
• Familiaritzeu-vos amb les lleis i regulacions de trànsit locals per a bicicletes elèctriques.
• Perform a pre-ride check before each use: inspect tires, brakes, and ensure all bolts are tight.
• Tingueu en compte el vostre entorn i anticipeu-vos als possibles perills.
• Adjust your riding style to weather conditions and road surfaces.
• Use the integrated lights for visibility, especially during low-light conditions.

3. Manteniment i cura

3.1 Comprovacions periòdiques

To ensure the longevity and safe operation of your HillMiles Mile 1, perform these checks regularly:

• Pneumàtics: Check tire pressure before each ride. The 14'*2.0' tires typically require 30-50 PSI. Inspect for wear or punctures.


Image demonstrating how to check and maintain proper tire pressure.

• Frens: Test brake levers for proper function and ensure brake pads are not excessively worn.
• Cadena: Mantingueu la cadena neta i lubricada per evitar l'oxidació i garantir un pedaleig suau.
• Cargols i elements de fixació: Periodically check that all bolts, especially on the handlebars, seat post, and wheels, are securely tightened.

3.2 Neteja

Neteja la teva bicicleta elèctrica amb anuncisamp cloth and mild soap. Avoid using high-pressure washers or directing water directly at electrical components (motor, battery, display) as the IP65 rating protects against splashes, not direct jets.

3.3 Cura de la bateria

To maximize the lifespan of your 36V 10.4AH battery:

• Eviteu esgotar completament la bateria abans de tornar-la a carregar.
• Charge the battery regularly, even if the bike is not used frequently.
• Guardeu la bateria en un lloc fresc i sec, idealment entre 10 °C i 20 °C (50 °F i 68 °F).
• Si l'emmagatzemeu durant períodes prolongats, carregueu la bateria fins a un 50-70% cada 1 o 2 mesos.

4. Resolució de problemes comuns

This section provides solutions for common problems you might encounter. For issues not listed here, please contact customer support.

5. Especificacions tècniques

• Model: HillMiles Mile 1
• Motor: Motor de concentrador sense escombretes de 250 W
• Bateria: 36V 10.4AH Lithium-ion
• Velocitat màxima: 25 km/h (15.5 mph)
• Interval: 40-65 km (25-40 miles) per charge (depending on terrain, rider weight, and assist level)
• Pneumàtics: 14" x 2.0" Pneumatic
• Material del marc: Aliatge d'alumini
• Resistència a l'aigua: IP65 (Protected from dust and low-pressure water jets from any direction)
• Frens: Frens de disc davanters i posteriors
• Pes: Aprox. 18 kg (39.7 lliures)

Note: Specifications are subject to change without notice. Actual performance may vary based on usage conditions.

6. Informació de la garantia

HillMiles provides a limited warranty for the Mile 1 Electric Bicycle against defects in materials and workmanship under normal use. The warranty period typically covers:

• Marc: 1 any
• Bateria: 6 mesos
• Motor and Controller: 1 any
• Altres components: 6 mesos

This warranty does not cover normal wear and tear, damage caused by misuse, neglect, accidents, unauthorized modifications, or improper maintenance. Proof of purchase is required for all warranty claims.

For full warranty terms and conditions, please refer to the official HillMiles weblloc o contacteu amb el servei d'atenció al client.

7. Atenció al client

If you have any questions, require technical assistance, or need to make a warranty claim, please contact our customer support team:

• Weblloc: www.hillmiles.com/support
• Correu electrònic: support@hillmiles.com
• Telèfon: +1-800-XXX-XXXX (Available Monday-Friday, 9 AM - 5 PM EST)

Si us plau, tingueu a mà el model del producte i la data de compra quan us poseu en contacte amb el servei d'assistència.