FLEXISPOT Queen Size Adjustable Bed Frame with 10 Inch Gel Memory Foam Mattress User Manual

Introducció

This manual provides essential instructions for the safe and efficient assembly, operation, and maintenance of your FLEXISPOT Queen Size Adjustable Bed Frame with 10 Inch Gel Memory Foam Mattress. Please read this manual thoroughly before use and retain it for future reference.

Informació de seguretat

• Do not exceed the weight capacity of 606 lbs (275 kg) for the bed frame.
• Exercise caution around pinch points when operating the adjustable bed frame to prevent injury.
• Ensure all power cords are clear and do not interfere with any adjustable bed mechanisms during operation.
• Always ensure the bed is in a flat position before attempting to lift or move it. Lifting by two people is recommended.
• Excessive pressure on the legs may cause damage.
• Remove all protective plastic covering before use.

Components

Before assembly, verify that all parts are included. Do not discard any packing materials until assembly is complete. All electronics and components are located in boxes under the base or attached to the frame.

• Adjustable Bed Frame (pre-assembled sections)
• Matalàs d'escuma de gel de 10 polzades
• Input Power Cord (A) x1
• Transformer Power Supply (B) x1
• 6" + 6" Legs (C) x6
• Wireless Remote Control (D) x1
• Mattress Retainer Bar (E) x1

Figure 1: Illustration of adjustable bed frame components.

Muntatge i muntatge

Follow these steps to assemble your adjustable bed frame. It is recommended to have two people for assembly due to the weight of the frame.

Step 1: Unpack and Position the Frame

• With the help of an assistant, place the carton on the floor in the desired location.
• Carefully open the carton and remove the adjustable bed frame.
• Gireu el producte de manera que la part posterior quedi cap amunt. Els rails laterals que estan plegats es troben a la secció dels peus.
• Desplegueu els rails plegats per tots dos costats i premeu-los fermament contra el velcro.

Pas 2: instal·leu les cames

• Install the six legs (C) firmly into the base of the frame. Screw the legs into the threaded holes on each corner of the adjustable base frame.

Step 3: Connect Power and Remote

• Extend the input power cord (A) and plug it into the transformer power supply (B).
• Connect the transformer power supply (B) to the control box. The control box is the black box attached to the bottom of the bed.
• Synchronize the remote control (D) with the control box. Ensure batteries are in the remote control (D). Find the black box mounted under the bed, locate the red circle indicating the button on the control box. Hold the button on the control for 3 seconds after plugging in the adjustable bed; the light will flash quickly. Then press any key on the remote control (D). When the light stops flashing, the match is successful.

Step 4: Install Mattress Retainer Bar

• Get the Mattress Retainer Bar (E) from packaging.
• Carefully insert the mattress retainer bar (E) into the 2 holes on the foot end of the bed base.

Step 5: Position the Mattress

• Place the 10-inch gel memory foam mattress onto the adjustable bed frame. The mattress will fully expand within 48 hours.

Instruccions de funcionament

Adjusting Bed Positions

• The head and foot sections of the adjustable bed frame can be operated simultaneously using the wireless remote control.
• The head section can be raised up to 60 degrees, and the leg section can be raised up to 20 degrees.
• Use the arrow buttons on the remote to adjust the head and foot sections to your desired angle.

Funcions de control remot

• The wireless remote control allows for instant adjustment of the bed's position.
• Refer to the remote control's diagram for specific button functions (e.g., head up/down, foot up/down).

Figure 2: Wired remote control for adjusting bed positions. The image shows the remote with buttons for head and foot adjustments, indicating the head can be raised to 60 degrees and the foot to 35 degrees.

Manteniment

Cura del matalàs

• The memory foam mattress features a three-way zipper for easy removal of the cover.
• The mattress cover is machine washable. Follow the care instructions on the label to prevent damage.
• Ensure the non-slip fabric on the mattress stays firmly in place for a stable sleep experience.

Cura del marc

• Regularly inspect all connections and fasteners to ensure they are secure.
• Mantingueu el motor i els components elèctrics lliures de pols i humitat.
• Netegeu el marc amb un suau, damp tela. Eviteu els productes químics durs.

Resolució de problemes

Bed Not Responding to Remote

• Check if the remote control batteries are correctly installed and have sufficient power. Replace if necessary.
• Ensure the power cord is securely plugged into a working electrical outlet and the transformer power supply.
• Re-synchronize the remote control with the control box following the instructions in the Setup section.

Soroll del motor

• The bed frame uses a whisper-quiet motor. If unusual noises occur, check for any obstructions under the bed or around the motor mechanisms.
• Ensure all legs and frame connections are tight.

Uneven Mattress Expansion

• The mattress is compressed in a box and requires up to 48 hours to fully expand to its optimal comfort and support. Allow sufficient time for expansion.

Especificacions

Garantia i suport

Informació de la garantia

The FLEXISPOT 10 Inch Gel Memory Foam Mattress is designed with your safety in mind and features 10-year warranty coverage. It is free from fiberglass and certified by OEKO-TEX and CertiPUR-US for guaranteed safety and quality assurance.

Atenció al client

For any questions, concerns, or assistance with your FLEXISPOT adjustable bed frame or mattress, please contact our customer support team. Refer to your product packaging or the official FLEXISPOT weblloc web per obtenir la informació de contacte més actualitzada.