COLAMY 25-Inch Swivel Counter Height Bar Stool

1. Informació important de seguretat

Please read and understand all instructions before assembly and use of this product. Keep this manual for future reference.

• This product has a maximum weight recommendation of 300 lliures per stool. Do not exceed this weight limit.
• Assembly is required. Follow the instructions carefully to ensure proper and safe assembly.
• Assegureu-vos que tots els cargols i perns estiguin ben ajustats abans d'utilitzar-los. Comproveu i torneu a estrènyer els elements de fixació periòdicament segons calgui.
• No us atureu al tamboret.
• Utilitzeu-lo sobre una superfície plana i estable per evitar que es bolqui.
• Mantingueu les peces petites allunyades dels nens durant el muntatge.

2. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar el muntatge. Si falta alguna peça o està danyada, no continueu amb el muntatge. Poseu-vos en contacte amb el servei d'atenció al client per obtenir ajuda.

Figura 2.1: Package Contents and Size Information. This image illustrates the individual components and their quantities, along with overall product dimensions.

Què hi ha a la caixa:

• Backrest (A) x 1
• Seat Cushion (B) x 1
• Footrest (C) x 1
• Wood Legs (D) x 4
• Screw Bag (E, F, G, H, I) x 1 (Contains various bolts, spring washers, flat washers, and Allen wrench)

Note: The product is shipped as a set of 2 stools. Each stool requires assembly.

3. Instruccions de muntatge

Assemble the chair on a clean, smooth surface to avoid scratching parts. Do not fully tighten all screws until the chair is fully assembled. This allows for minor adjustments.

Step 1: Attach Wood Legs to Footrest

Figura 3.1: Step 1 Assembly. Connect the four Wood Legs (D) with the Footrest (C) using four 8*35mm Bolts (F), Spring Washers (G), and Flat Washers (H). Tighten the bolts to 50% using the Allen Wrench (I).

Step 2: Attach Seat Cushion to Backrest

Figura 3.2: Step 2 Assembly. Attach the Seat Cushion (B) to the Backrest (A) using four 8*40mm Bolts (E), Spring Washers (G), and Flat Washers (H). Tighten the bolts to 50% using the Allen Wrench (I).

Step 3 & 4: Connect Base to Seat and Final Tightening

Figura 3.3: Step 3 & 4 Assembly. Attach the finished base (from Step 1) to the seat (from Step 2) using four 8*45mm Bolts (E), Spring Washers (G), and Flat Washers (H). Once all parts are connected, fully tighten all screws to 100% to ensure stability.

4. Instruccions de funcionament

4.1. Funció de gir de 360°

The bar stool features a 360-degree swivel seat, allowing for easy rotation. To use, simply turn the seat in the desired direction. This function provides flexibility for accessing different areas or interacting with others without moving the entire stool.

Figura 4.1: 360° Swivel Seat Design. The seat rotates smoothly for convenience and flexibility.

4.2. Ergonomic Backrest and Footrest

The stool is designed with an ergonomic backrest to provide support to your back, waist, and hips, promoting comfortable seating for extended periods. The integrated footrest offers additional support and stability, allowing you to relax your legs.

Figura 4.2: Product Detail. This image highlights the comfortable upholstered material, high-density sponge, decorative nailhead trim, and non-slip feet for stability.

5. Manteniment

5.1. Neteja

To clean the bar stool, simply wipe it with a dry cloth. Avoid using harsh chemicals or abrasive cleaners, as these may damage the wood finish or upholstery fabric.

5.2. Fastener Checks

Periodically check all bolts and screws to ensure they remain tight. Re-tighten any loose fasteners to maintain the stool's stability and safety.

6. Solució De Problemes

6.1. Stool Feels Unstable or Wobbly

• Solució: Ensure all assembly bolts are fully tightened. If the issue persists, loosen all bolts slightly, place the stool on a flat surface, apply gentle pressure to all corners to ensure even contact, then re-tighten all bolts completely.
• Solució: Verify that the stool is placed on a flat, even surface. Uneven flooring can cause wobbling.

6.2. Swivel Mechanism is Stiff or Noisy

• Solució: The swivel mechanism is designed for smooth operation. If it feels stiff, ensure no debris is obstructing the mechanism. Avoid applying lubricants unless specifically recommended by the manufacturer, as this could attract dust.

6.3. Parts Missing or Damaged

• Solució: Do not attempt to assemble the product with missing or damaged parts. Contact the retailer or manufacturer's customer support for replacement parts.

7. Especificacions

Figura 7.1: Product Dimensions. This image provides detailed measurements for the bar stool.

8. Informació de la garantia

Specific warranty details for the COLAMY 25-Inch Swivel Counter Height Bar Stool are not provided in this manual. For information regarding product warranty, please refer to the documentation included with your purchase or contact the retailer/manufacturer directly.

9. Atenció al client

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact the retailer from whom you purchased this product. You may also visit the official COLAMY weblloc per obtenir més informació de suport.