Electactic Commercial Ice Maker (101LBS/DAY)

Introducció

Thank you for choosing the Electactic Commercial Ice Maker. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new ice machine. Please read these instructions thoroughly before installation and use, and retain them for future reference.

Figure 1: Electactic Commercial Ice Maker and included accessories.

Instruccions de seguretat

• Assegureu-vos que l'aparell estigui ben connectat a terra.
• No feu funcionar la màquina de gel amb un cable d'alimentació o un endoll danyats.
• Mantingueu la màquina de gel allunyada de fonts de calor i de la llum solar directa.
• Allow the unit to stand upright for at least 24 hours before initial use to allow refrigerant to settle.
• Utilitzeu només aigua potable per a la producció de gel.
• No emmagatzemeu substàncies explosives com ara llaunes d'aerosol amb un propulsor inflamable en aquest aparell.
• Aquest aparell no està pensat per ser utilitzat per persones (inclosos nens) amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat.
• Els nens han de ser supervisats per assegurar-se que no juguin amb l'aparell.

Producte acabatview

The Electactic Commercial Ice Maker is designed for high-efficiency ice production, featuring a durable stainless steel construction and an intuitive LED digital display. It produces up to 101 lbs of ice per 24 hours with a storage capacity of 33 lbs.

Components clau:

• Ice Maker Unit (Stainless Steel Casing)
• LED Digital Control Panel
• Ice Storage Bin (33 lbs capacity)
• Scoop de gel
• Mànega d'entrada d'aigua
• Mànega de drenatge
• Peus ajustables

Configuració

1. Desembalatge i col·locació:

1. Traieu amb cura tots els materials d'embalatge.
2. Place the ice maker on a firm, level surface. Ensure there is adequate ventilation around the unit (at least 5 inches of space on all sides).
3. Allow the unit to stand upright for a minimum of 24 hours before plugging it in. This allows the refrigerant to stabilize.

2. Connexió d'aigua:

The ice maker supports two methods for water supply:

Figure 2: Water inlet options for the ice maker.

• Direct Tap Water Connection: Connect the provided water inlet hose to a potable water supply and the designated inlet on the ice maker. Ensure all connections are secure to prevent leaks.
• Bottled Water Connection: For bottled water, connect the appropriate adapter and hose to a water bottle (e.g., 5-gallon) and the ice maker's water inlet.

3. Drainage Connection:

Connect the drainage hose to the unit's drain outlet and route it to a suitable drain or container. Ensure the drainage hose is positioned lower than the ice maker's drain outlet for proper water flow.

4. Neteja inicial:

Before first use, it is recommended to clean the interior of the ice maker. Refer to the "Maintenance" section for detailed cleaning instructions. After cleaning, perform a self-cleaning cycle.

Instruccions de funcionament

1. Tauler de control acabatview:

Figure 3: LED Digital Control Panel.

• Botó ON/OFF: Powers the unit on or off. Press and hold to force ice to fall off.
• TIMER/CLEAN Button: Activates the timer function or initiates the self-cleaning cycle (press and hold for 5 seconds).
• Botó '+': Increases settings (e.g., ice thickness, timer duration).
• Botó '-': Decreases settings (e.g., ice thickness, timer duration).
• Pantalla LED: Shows current status, temperature, error codes, and timer settings.

2. Starting Ice Production:

1. Ensure the water supply is connected and the drain hose is properly positioned.
2. Connecteu la màquina de gel a una presa de corrent amb connexió a terra.
3. Premeu el botó ON/OFF button to start the unit. The machine will automatically begin the ice-making cycle.
4. The first batch of ice may take slightly longer. The unit can produce approximately 45 ice cubes in 12-18 minutes.

Figure 4: Ice production capacity.

3. Adjusting Ice Thickness:

You can adjust the ice cube thickness to suit your preference:

Figure 5: Ice thickness adjustment options.

• While the machine is operating, use the '+' i '-' buttons to cycle through thickness settings.
• A shorter freezing time results in thinner ice, ideal for smoothies.
• A longer freezing time results in thicker ice, suitable for cooling drinks or retaining freshness.

4. Ús de la funció de temporitzador:

The 24-hour timer allows you to schedule when the ice maker starts or stops operation.

1. Premeu el botó TEMPORIZADOR/NETEJA button once to activate the timer setting.
2. Utilitza el '+' i '-' buttons to set the desired delay time (in hours) for the unit to turn on or off.
3. Confirmeu la configuració prement el botó TEMPORIZADOR/NETEJA button again or waiting a few seconds for it to auto-confirm.

5. Ice Storage:

The ice storage bin is insulated to help preserve ice for a short period. For extended storage, transfer ice to a freezer, as this machine is not a refrigerator and cannot maintain ice in a frozen state indefinitely.

Manteniment

1. Auto Self-Cleaning Function:

The ice maker features an automatic self-cleaning function to simplify maintenance.

Figure 6: Self-cleaning cycle in progress.

1. Ensure the unit is connected to a water supply and the drain hose is properly set up.
2. Manteniu premut el botó TEMPORIZADOR/NETEJA button for 5 seconds. The display will indicate the cleaning cycle has started.
3. The self-cleaning process takes approximately 30 minutes. Do not interrupt the cycle.
4. Once complete, the unit will automatically switch off or return to standby mode.

2. Neteja regular:

• Exterior: Wipe the stainless steel exterior with a soft cloth and mild detergent. Avoid abrasive cleaners.
• Interior: Periodically clean the ice storage bin and other accessible interior surfaces with a solution of warm water and mild soap. Rinse thoroughly and ensure all soap residue is removed.
• Sistema d'aigua: For optimal performance and hygiene, consider using a descaling solution specifically designed for ice makers every few months, especially in areas with hard water. Follow the descaling product's instructions carefully.

3. Draining the Unit:

To drain the water from the unit, locate the drain plug at the bottom of the machine. Place a container beneath it, remove the plug, and allow all water to drain. Reinsert the plug securely after draining.

Resolució de problemes

Especificacions

Figura 7: Dimensions del producte i aplicacions típiques.

Garantia i Suport

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Electactic brand store. You can typically find support resources, FAQs, and contact information there.

Visit the Electactic Brand Store