Introducció
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your SYLVOX Mobile TV Floor Stand. This heavy-duty rolling TV stand is designed for 65-75 inch flat or curved televisions, supporting a maximum load of 132 lbs (60 kg). It features lockable wheels for mobility and stability, universal VESA compatibility, and integrated cable management.
Please read this manual thoroughly before installation and use to ensure safe and correct operation.
Informació de seguretat
- Capacitat de pes: Do not exceed the maximum load capacity of 132 lbs (60 kg). Overloading can cause instability and potential injury.
- Mida del televisor: This stand is designed for 65-75 inch TVs. Ensure your TV's size and weight are within the specified limits.
- Compatibilitat VESA: Verify your TV's VESA mounting pattern is within the supported range (200x200mm to 1200x600mm).
- Muntatge: Assemble the stand on a soft, clean surface to prevent scratches. Ensure all screws are tightened securely before mounting the TV.
- Estabilitat: Always engage the locking wheels when the stand is in a stationary position to prevent accidental movement.
- Moviment: When moving the stand, ensure the TV is securely attached and move slowly and carefully, especially over uneven surfaces.
- Nens i animals de companyia: Keep children and pets away from the stand during assembly and ensure the TV is securely mounted to prevent tipping.
Contingut del paquet
Si us plau, comproveu que tots els components siguin presents i no estiguin danyats. Si hi ha alguna peça que falti o que estigui danyada, poseu-vos en contacte amb el servei d'atenció al client.
- Main Frame Components (Base, Vertical Columns, Crossbars)
- Suports de muntatge de TV
- Lockable Caster Wheels (x4)
- Hardware Kit (various screws, washers, spacers for assembly and TV mounting)
- Cable Management Box/Clips
- Assembly Tools (e.g., Allen wrench, small spanner)
- Manual d'instruccions
Muntatge i muntatge
Seguiu aquests passos amb atenció per a un muntatge correcte. Es recomana que hi hagi dues persones per muntar el televisor.
Step 1: Assemble the Base and Vertical Columns
- Attach the caster wheels to the base legs. Ensure two of the wheels are lockable and positioned as per the diagram.
- Connect the vertical support columns to the base using the provided screws and tools.
- Secure any crossbars or shelves to the vertical columns as indicated in the assembly diagram.
Image: Initial assembly of the stand's base and vertical supports.
Pas 2: Fixeu els suports de muntatge del televisor al televisor
- Col·loqueu amb cura el televisor cara avall sobre una superfície suau i neta.
- Identifiqueu els forats de muntatge VESA a la part posterior del vostre televisor.
- Seleccioneu els cargols, les volanderes i els separadors adequats del kit de maquinari que s'adaptin al patró VESA del vostre televisor.
- Attach the TV mounting brackets to the back of your TV, ensuring they are level and securely fastened. Do not overtighten.
Image: Diagram showing VESA mounting hole patterns and bracket attachment.
Pas 3: Munteu el televisor al suport
- With assistance, carefully lift the TV and hook the attached mounting brackets onto the main frame of the stand.
- Assegureu-vos que el televisor estigui centrat i anivellat.
- Secure the TV to the stand using the safety screws or locking mechanisms on the brackets.
Guia de vídeo d'instal·lació
Video: Official SYLVOX Rolling TV Stand Installation Guide. This video demonstrates the step-by-step assembly process for the TV stand.
Instruccions de funcionament
Mobilitat i estabilitat
The stand is equipped with four heavy-duty caster wheels for easy movement. Two of these wheels are lockable to ensure stability when the stand is stationary.
- Moure: Unlock the two lockable wheels by flipping their levers. Gently push the stand to your desired location.
- Per assegurar: Once in position, engage the locks on the two lockable wheels to prevent unintended movement.
Image: Close-up of lockable casters and illustration of stand mobility.
Gestió de cables
Utilize the integrated cable management features to keep your setup tidy and prevent cable tangles.
- Route TV and device cables through the designated cable clips or channels on the stand's frame.
- Use the compact storage box (if included) to house small streaming devices or remote controls, keeping them out of sight.
Imatge: Example of cables neatly routed through the stand's frame.
Manteniment
- Neteja: Netegeu el suport amb un drap suau i sec. Per a marques difícils, utilitzeu un drap lleugerament sec.amp drap i detergent suau i, a continuació, assequeu-ho bé. Eviteu productes de neteja abrasius.
- Comprovació de maquinari: Reviseu periòdicament tots els cargols i perns per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
- Rodes de rodes: Keep the caster wheels free of debris (hair, dust, etc.) to ensure smooth rolling. Lubricate if needed.
- Condicions ambientals: While the stand is robust, prolonged exposure to extreme weather conditions (e.g., heavy rain, direct sunlight for extended periods) may affect its finish and longevity. If used outdoors, consider covering it when not in use.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El suport és inestable o trontolla. | Screws are loose; TV is too heavy or not centered; uneven floor. | Check and tighten all assembly screws. Ensure TV weight is within limits and centered. Move to a level surface or use shims if necessary. |
| Les rodes giratòries no giren suaument. | Debris caught in wheels; wheels are locked. | Clear any debris from the wheels. Ensure lockable wheels are in the unlocked position. |
| TV does not fit the mounting brackets. | Incorrect VESA pattern; wrong screws/spacers used. | Verify your TV's VESA pattern matches the stand's compatibility (200x200mm to 1200x600mm). Use the correct screws and spacers from the hardware kit. |
| Peces que falten o components danyats. | Error d'embalatge o danys per enviament. | Contact SYLVOX customer support immediately for assistance. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | SYLVOX |
| Model | B0FD3C5CFN |
| Tipus de muntatge | Muntatge al terra |
| Tipus de moviment | Rotate (implies swivel, not full rotation) |
| Material | Acer d'aliatge |
| Color | Negre |
| Dispositius compatibles | Televisió |
| Minimum Supported Screen Size | 60 polzades |
| Maximum Supported Screen Size | 120 polzades (Note: Product title specifies 65-75 inches, but specifications list up to 120 inches. User should verify VESA for larger TVs.) |
| Capacitat de càrrega màxima | 132 lliures (60 kg) |
| Compatibilitat VESA | 200x200mm a 1200x600mm |
| Fabricant | Kontech |
Image: Technical drawing showing the dimensions of the TV stand.
Garantia i Suport
Informació de la garantia
This SYLVOX TV Floor Stand comes with a 1 anys de garantia from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or exceeding the specified weight capacity.
Per a reclamacions de garantia, conserveu el comprovant de compra.
Atenció al client
If you encounter any issues during assembly or operation, or if you have questions about your product, please contact the seller, FutureIntelligence, through your purchase platform. They can provide assistance and guidance.
For general inquiries about SYLVOX products, you may visit the official SYLVOX store on Amazon: SYLVOX Amazon Store