Introducció
Thank you for choosing the Amazon Basics Single Outlet Hose Watering Timer. This device is designed to simplify your garden irrigation by providing flexible and automated watering schedules. Please read this manual carefully before installation and use to ensure proper operation and longevity of your product.
Característiques del producte
- Smart Watering Timer: Program flexible watering schedules from 1 minute to 3 hours 59 minutes for hassle-free garden irrigation.
- Controls intuïtius: Activate manual watering with customizable duration when needed. The program can be paused for 24, 48, or 72 hours.
- Angled Screen Design: The 45% adjustable tilted screen ensures optimal visibility from any angle, displaying time, program, and battery status.
- Leak-Free Connection: Rubber gaskets ensure a tight seal and prevent water waste. Standard 1.9cm BSP thread. Operates on 2 AA alkaline batteries (not included).
Figura 1: Frontal view of the Amazon Basics Single Outlet Hose Watering Timer, showing the digital display and control buttons.
Contingut del paquet
El vostre paquet ha de contenir els elements següents:
- 1 x Amazon Basics Single Outlet Hose Watering Timer
- 1 x Manual d'usuari
- Rubber gaskets (pre-installed or included for leak-free connection)
Note: 2 AA alkaline batteries are required and are NOT included in the package.
Configuració
1. Instal·lació de la bateria
- Localitza el compartiment de les piles a la part posterior del temporitzador.
- Obriu la tapa del compartiment de la bateria.
- Introduïu 2 piles alcalines AA noves, assegurant-vos de la polaritat correcta (+/-).
- Tanqueu bé la tapa del compartiment de la bateria per mantenir la resistència a l'aigua.
Figure 2: Top connection of the timer, showing the filter and threaded inlet. Ensure rubber gaskets are in place for a leak-free seal.
2. Connecting to the Faucet
- Ensure the faucet is clean and free of debris.
- Check that the rubber gasket is properly seated inside the timer's inlet connector.
- Screw the timer onto your standard 1.9cm (3/4 inch) outdoor faucet by hand until it is snug. Do not overtighten.
- Connect your garden hose to the outlet of the timer.
- Slowly turn on the faucet. Check for any leaks. If leaks occur, tighten the connections slightly or adjust the rubber gaskets.
Instruccions de funcionament
1. Configuració de l'hora actual
Refer to the angled screen for clear visibility of settings.
- Press the "SET" button to enter time setting mode.
- Use the "+" and "-" buttons to adjust the hour. Press "SET" to confirm.
- Use the "+" and "-" buttons to adjust the minute. Press "SET" to confirm.
2. Programming a Watering Schedule
The timer allows flexible schedules from 1 minute to 3 hours 59 minutes.
- Press the "PROG" button to enter program setting mode.
- Set the START TIME: Use "+" and "-" to adjust the hour and minute, pressing "PROG" to confirm each.
- Set the WATERING DURATION: Use "+" and "-" to adjust the duration (minutes/hours), pressing "PROG" to confirm.
- Set the WATERING FREQUENCY: Use "+" and "-" to select how often the timer should water (e.g., every 12 hours, every 24 hours, specific days). Press "PROG" to confirm.
- Once all settings are confirmed, the timer will display the next scheduled watering time.
3. Reg manual
Per regar manualment fora de l'horari programat:
- Premeu el botó "MANUAL".
- Use "+" and "-" buttons to set the desired manual watering duration.
- Press "MANUAL" again to start manual watering. The timer will automatically stop after the set duration.
4. Pause Function (Rain Delay)
If it rains or you don't need to water for a few days, you can pause the program:
- Press the "DELAY" button.
- Use "+" and "-" buttons to select the pause duration (24, 48, or 72 hours).
- Press "DELAY" again to confirm. The timer will resume its programmed schedule after the delay period.
Figure 3: Visual representation of the timer's main features, including flexible schedules, manual watering, and secure sealing.
Manteniment
- Substitució de la bateria: Replace batteries when the low battery indicator appears on the screen to ensure continuous operation.
- Neteja de filtres: Periodically check and clean the filter located in the inlet connector to prevent blockages and maintain water flow.
- Emmagatzematge d'hivern: During freezing temperatures, remove the timer from the faucet, drain any remaining water, and store it indoors to prevent damage.
- Neteja general: Netegeu el temporitzador amb un suau, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El temporitzador no rega. | Low batteries, incorrect program, faucet off, water pressure too low. | Check battery status and replace if needed. Verify program settings. Ensure faucet is fully open. Check water supply. |
| Fuita d'aigua per les connexions. | Loose connection, damaged gasket, missing gasket. | Tighten connections. Check and replace rubber gaskets if damaged or missing. |
| La pantalla està en blanc o tènue. | Piles gastades o baixes. | Canvieu les piles per piles alcalines AA noves. |
Especificacions
- Número de model: AMZ622617EU
- Dimensions: 8.2 cm x 13.7 cm x 18.5 cm (llargada x amplada x alçada)
- Pes: 383.4 g
- Tipus de fil: Standard 1.9cm (3/4 inch) BSP
- Font d'alimentació: 2 piles alcalines AA (no incloses)
- Durada del reg: 1 minut a 3 hores 59 minuts
- Funció de pausa: 24, 48 o 72 hores
- Color: Grey, Black, Blue
- País d'origen: Xina
Figura 4: Dimensions del producte per a la planificació de la instal·lació.
Garantia i Suport
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Amazon Basics weblloc.