AMPBANK H128 Handheld Thermal Camera User Manual

1. Introducció

This manual provides comprehensive instructions for the safe and effective use of the AMPBANK H128 Handheld Thermal Camera. The H128 is designed for precise temperature measurement and thermal imaging, suitable for various applications including electrical inspections, HVAC diagnostics, building energy audits, and automotive maintenance. Please read this manual thoroughly before operating the device and retain it for future reference.

Figura 1.1: El/La/Els/Les AMPBANK H128 Handheld Thermal Camera, showcasing its ergonomic design and integrated display.

2. Informació de seguretat

Always observe the following safety precautions to prevent injury and damage to the device.

• Do not point the camera directly at extremely high-intensity energy sources, such as the sun or lasers, as this may damage the infrared detector.
• Avoid dropping the device or subjecting it to severe impact, despite its robust design.
• Do not immerse the device in water or other liquids. While it has an IP65 rating for dust and water jet protection, it is not designed for submersion.
• Use only the specified charging cable (USB-C) and power adapter to charge the device.
• No intenteu desmuntar ni modificar la càmera. Les reparacions només les ha de realitzar personal de servei autoritzat.
• Keep the lens clean and free from dust and debris. Use a soft, lint-free cloth for cleaning.
• Operate the device within the specified environmental conditions (temperature and humidity).

3. Producte acabatview

3.1. Components

El AMPBANK H128 thermal camera includes the following main components:

• Lent infraroja: Capta la radiació tèrmica.
• Pantalla de visualització: Mostra imatges tèrmiques, lectures de temperatura i opcions de menú.
• Botons de control: For navigation and selection (OK, Up, Down, Return/Power).
• Botó d'activació: Per capturar imatges.
• Port USB-C: Per a càrrega i transferència de dades.
• Muntatge de trípode: Standard 1/4-inch thread for stable positioning.

3.2. Característiques clau

The H128 thermal camera offers a range of advanced features for efficient and accurate thermal inspections:

• Enhanced Clarity with TISR Resolution: The camera utilizes TISR (Thermal Image Super Resolution) technology to achieve an effective display resolution of 240x240 pixels from a 128x128 infrared sensor, providing clearer thermal images.

Figure 3.1: Comparison of thermal image clarity with and without TISR technology, demonstrating the enhanced 240x240 resolution.
• Durada de la bateria ampliada de 24 hores: Equipped with a built-in 2900mAh rechargeable battery, the H128 provides up to 24 hours of continuous operation, minimizing downtime during extended inspections.


Figure 3.2: Illustration of the H128's long-lasting 24-hour battery life and Type-C charging port.

• Precise Temperature Measurement: The device offers high accuracy with a temperature resolution of 0.1°C and readings within ±3%, covering a wide temperature range from -4°F to 842°F (-20°C to 450°C). Users can adjust emissivity for various materials to improve accuracy.


Figure 3.3: The H128 in use, demonstrating its capability for accurate temperature measurement in an electrical panel.

• Temperature Alarm for Anomaly Detection: A built-in alarm system quickly identifies abnormal heat sources, automatically tracking and displaying maximum, minimum, and center temperatures on the screen.

Figure 3.4: The H128 display highlighting hot, center, and cold spots with an integrated high/low temperature alarm.
• Durable and Robust Design: The H128 is built to withstand demanding environments, featuring a 6.56-foot (2-meter) drop protection and an IP65 ingress protection rating against dust and water jets.
• Velocitat de fotogrames alta: A 25Hz frame rate ensures smooth, real-time thermal imagery, crucial for dynamic inspections.


Figure 3.5: Visual comparison of thermal image fluidity at 25Hz versus 9Hz frame rates.

• Multiple Thermal Palettes: Choose from 5 different color palettes (Iron Red, Black Hot, Rainbow, White Hot, Red Hot) to best visualize temperature differences for specific applications.


Figure 3.6: Display of the five available thermal color palettes for varied visualization of heat signatures.

4. Configuració

4.1. Desembalatge

Carefully remove all items from the packaging. The box should contain:

• AMPBANK H128 Thermal Imaging Camera
• Cable USB-C

Inspect the camera for any signs of damage. If any components are missing or damaged, contact customer support immediately.

4.2. Carregant la bateria

Before first use, fully charge the camera's built-in battery.

1. Connect the supplied USB-C cable to the USB-C port on the top of the camera.
2. Connecteu l'altre extrem del cable USB-C a un adaptador de corrent USB compatible (no inclòs) o al port USB d'un ordinador.
3. The charging indicator on the screen will show the charging status. A full charge typically takes several hours.
4. Un cop estigui completament carregat, desconnecteu el cable.

4.3. Engegada inicial i configuració bàsica

1. Encès: Press and hold the power button (often integrated with the Return button) for approximately 8 seconds until the screen illuminates.
2. Selecció d'idioma: Upon first power-on, you may be prompted to select your preferred language. Use the Up/Down buttons to navigate and the OK button to confirm.
3. Data i hora: Establiu la data i l'hora correctes per a l'hora exactaamping of captured images. Navigate to the settings menu using the OK button, then find the Date/Time option.

5. Funcionament

5.1. Funcionament bàsic

• Encès/apagat: Press and hold the power button for 8 seconds to turn on. Press and release the power button to turn off or enter sleep mode.
• Navegació pels menús: Utilitza el OK botó per entrar al menú. Feu servir el botó Up i Avall arrow buttons to scroll through options. Press OK to select an option. Press the Tornar button to exit a menu or go back.
• Captura d'imatges: Aim the camera at the target. Press the trigger button (located on the handle) to capture a thermal image. Images are saved internally.

5.2. Measurement Modes and Settings

• Temperature Spot Measurement: The H128 automatically displays the maximum, minimum, and center temperatures on the screen.
• Ajust d'emissivitat: For accurate temperature readings, adjust the emissivity setting based on the material being inspected. Access this setting through the menu. Common emissivity values can be found in reference tables.
• Configuració de distància: Inputting the approximate distance to the target can further refine temperature accuracy.
• Thermal Palettes: Change the color scheme of the thermal image to highlight temperature differences more effectively. Navigate to the palette settings in the menu and choose from Iron Red, Black Hot, Rainbow, White Hot, or Red Hot.

5.3. Gestió de dades

The H128 can store over 8000 images internally. To transfer images to a computer:

1. Connect the camera to your computer using the supplied USB-C cable.
2. The camera will appear as a removable storage device.
3. Browse to the image folder and copy the desired files al vostre ordinador.

Figure 5.1: Connecting the H128 thermal camera to a laptop via USB-C for image transfer.

6. Manteniment

6.1. Neteja

• Cos de la càmera: Netegeu el cos de la càmera amb un drap suau iamp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Lent infraroja: The infrared lens is a delicate optical component. Use a lens cleaning cloth or a soft, lint-free cloth specifically designed for optics. Gently wipe the lens to remove dust or smudges. Do not apply excessive pressure or use harsh chemicals.

6.2. Emmagatzematge

When not in use, store the H128 in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is partially charged (around 50%) before long-term storage to preserve battery health.

6.3. Cura de la bateria

Per maximitzar la vida útil de la bateria:

• Eviteu descarregar completament la bateria amb freqüència.
• Eviteu deixar la bateria completament carregada durant períodes prolongats.
• Carregueu la bateria a temperatura ambient.

7. Solució De Problemes

Si el problema persisteix després d'intentar aquestes solucions, poseu-vos en contacte amb AMPBANK customer support.

8. Especificacions

9. Garantia i assistència

For detailed warranty information, please refer to the warranty card included with your product or visit the official AMPBANC weblloc web. Els termes i condicions de la garantia poden variar segons la regió i el producte.

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact AMPBANK customer support through their official channels:

• Fabricant: AMPBANC
• Botiga online: Visita el AMPBANK Store on Amazon
• Consulteu l'oficial AMPBANC website or product packaging for the most current contact information (email, phone, service centers).