X-Sense SMS0A Motion Detector (2-Pack) Instruction Manual

1. Introducció

The X-Sense SMS0A Motion Detector is an accessory designed to expand your X-Sense home security system. This 2-pack of motion sensors is compatible with X-Sense AS05, AS08, and AS12 security kits and requires an SBS50A Base Station (sold separately) for full functionality. These compact, battery-powered sensors provide reliable motion detection and integrate seamlessly with your existing X-Sense security setup, offering enhanced coverage for various areas of your home.

2. Informació de seguretat

• No ho facis attempt to repair or modify the device. Refer all servicing to qualified personnel.
• No ho facis expose the device to extreme temperatures, direct sunlight, or excessive moisture.
• Ensure batteries are inserted with correct polarity. Dispose of used batteries responsibly according to local regulations.
• Mantingueu el dispositiu fora de l'abast dels nens i les mascotes.
• Aquest dispositiu només és per a ús interior.

3. Contingut del paquet

Your X-Sense SMS0A Motion Detector package includes the following items:

• 2 x X-Sense SMS0A Motion Detectors
• 4 x AAA Batteries (2 per detector, pre-installed or included separately)
• Adhesive Tape for mounting
• Cargols de muntatge i tacs de paret

4. Producte acabatview

The X-Sense SMS0A Motion Detector is a compact and versatile sensor designed to detect movement within its coverage area. It communicates wirelessly with the X-Sense SBS50A Base Station, which then relays information to your smartphone via the X-Sense Home Security App.

Imatge: An illustration of a complete X-Sense smart security kit, demonstrating how various sensors, including motion detectors, connect wirelessly to a central base station to provide comprehensive home safety.

Característiques principals:

• Connectivitat sense fils: Communicates with the SBS50A Base Station over a long-range wireless protocol, up to 500 meters (1640 feet) in open air.
• Funciona amb bateria: Uses 2 AAA batteries with an estimated lifespan of up to 5 years.
• Disseny compacte: Measures 66 x 36 x 66 mm (2.6 x 1.4 x 2.6 inches), allowing for discreet placement.
• Muntatge flexible: Supports both wall and corner mounting using adhesive tape or screws.
• Control de l'aplicació: Manage settings, receive notifications, and arm/disarm your system via the X-Sense Home Security App.
• Expansió del sistema: Each SBS50A Base Station can support up to 50 PIR (Passive Infrared) sensors.
• Temperatura de funcionament: Functions reliably in temperatures ranging from 0°C to 40°C (32°F to 104°F).

5. Configuració

5.1 Requisits previs

• An X-Sense SBS50A Base Station (sold separately) must be set up and connected to your home Wi-Fi network.
• The X-Sense Home Security App must be installed on your smartphone and linked to your SBS50A Base Station.

5.2 Instal·lació de la bateria

The motion detectors come with 2 AAA batteries. If not pre-installed, open the battery compartment on the back of the detector and insert the batteries, ensuring correct polarity (+/-). Close the compartment securely.

5.3 Pairing with the Base Station

1. Ensure your SBS50A Base Station is powered on and connected to the X-Sense App.
2. Open the X-Sense Home Security App and navigate to the device pairing section.
3. On the SMS0A Motion Detector, locate the pairing button (refer to the device diagram in the app or manual for exact location).
4. Press and hold the pairing button until the indicator light on the detector starts to flash, indicating it is in pairing mode.
5. Follow the on-screen instructions in the X-Sense App to complete the pairing process. The app will confirm when the detector is successfully added to your system.

5.4 Mounting the Motion Detector

The SMS0A Motion Detector can be mounted on a flat wall or in a corner. Choose a location that provides optimal coverage for the area you wish to monitor, such as hallways, basements, stairwells, or entry points. Avoid placing it near heat sources, direct sunlight, or areas with strong air currents that could cause false alarms.

Imatge: An X-Sense motion detector shown mounted in the corner of a room, illustrating its compact design and flexible installation options for both flat walls and corners.

Muntatge a la paret:

1. Clean the desired wall surface to ensure it is dry and free of dust.
2. Peel off the protective film from the adhesive tape on the back of the detector.
3. Firmly press the detector onto the wall at the chosen height and hold for 30 seconds.
4. For a more secure installation, use the provided screws and wall plugs. Mark the drill holes, drill, insert plugs, and then screw the detector into place.

Corner Mounting:

1. Clean both corner surfaces where the detector will be placed.
2. Peel off the protective film from the adhesive tape on the side of the detector.
3. Align the detector in the corner and firmly press it against both surfaces, holding for 30 seconds.
4. Alternatively, use screws and wall plugs for a permanent installation.

6. Instruccions de funcionament

The X-Sense SMS0A Motion Detector operates in conjunction with your SBS50A Base Station and the X-Sense Home Security App.

6.1 X-Sense Home Security App Control

The app provides comprehensive control and monitoring capabilities for your security system.

Imatge: A smartphone screen displaying the X-Sense Home Security App, illustrating the various security modes available for selection, such as Disarm, Home, and Away.

• Arma/Desarma: Easily switch between 'Home', 'Away', and 'Disarm' modes directly from the app. You can also set up automatic schedules for these modes.
• Monitorització en temps real: View the status of your motion detectors and other connected devices.
• Historial d'esdeveniments: Access a log of all detected movements and system events.

6.2 Notificacions

When motion is detected by an SMS0A sensor while the system is armed, the SBS50A Base Station will trigger an alarm (if configured) and send instant push notifications to your smartphone.

Imatge: A smartphone displaying a push notification alert from the X-Sense security system, indicating that a sensor has detected an event, such as an opening door or window.

6.3 Compartir l'accés

You can share access to your X-Sense security system with family members through the app, allowing them to receive notifications and control the system as well.

7. Manteniment

7.1 Substitució de la bateria

The SMS0A Motion Detector uses 2 AAA batteries. The X-Sense App will notify you when the battery level is low. To replace the batteries:

1. Carefully remove the detector from its mounting location.
2. Obriu el compartiment de la bateria a la part posterior.
3. Remove the old AAA batteries and insert new ones, ensuring correct polarity.
4. Close the battery compartment and re-mount the detector.
5. Elimineu les piles velles d'acord amb la normativa ambiental local.

7.2 Neteja

To ensure optimal performance, periodically clean the exterior of the motion detector. Use a soft, dry cloth to wipe away dust and dirt. No ho facis utilitzar netejadors líquids o materials abrasius.

8. Solució De Problemes

9. Especificacions

10. Garantia i assistència

X-Sense ofereix una garantia limitada per a aquest producte. Per obtenir informació detallada sobre la garantia, assistència tècnica o consultes sobre el servei d'atenció al client, consulteu la pàgina oficial de X-Sense. website or contact their customer support team directly. Please have your product model number (SMS0A) and purchase information ready when contacting support.

Weblloc: www.x-sense.com