Manual d'usuari de l'intercomunicador Bluetooth de la motocicleta Fodsports T1

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Fodsports T1 Motorcycle Bluetooth Intercom. Please read this manual thoroughly before using the device to ensure proper function and safety.

Contingut del paquet

The Fodsports T1 package includes the following items:

• T1 Device
• Clamp
• 3M Tape Clamp
• 3M cola de velcro
• Altaveu
• Micròfon de tub dur
• Micròfon de botó
• Cable USB
• Sticker (5 interchangeable styles)
• Velcro (for speakers and microphone)
• Tornavís
• Manual d'usuari

Image: Contents of the Fodsports T1 package, including the intercom unit, various mounting accessories, microphones, speakers, cables, and documentation.

Configuració i instal·lació

Component acabatview

The Fodsports T1 unit features a power button, a mode button, a multi-function knob for volume and track control, an earphone port, and a Type-C charging port. It also comes with 5 interchangeable sticker options to customize its appearance.

Imatge: Primer pla view of the Fodsports T1 intercom unit, highlighting its buttons, ports, and overall design.

Image: The Fodsports T1 intercom unit displayed with five different interchangeable sticker designs, allowing for personalization.

Instal·lació del casc

The Fodsports T1 supports installation on most helmet styles. Two mounting options are provided: a plastic clamp and a 3M adhesive clamp.

1. Instal·lació d'altaveus i micròfon

1. Remove the helmet liner.
2. Tear off the Velcro backing for the speakers and stick them into the reserved headphone slots in the helmet.
3. Install the speakers in the same position.
4. Tear off the microphone's Velcro and stick it inside the helmet near the mouth position.
5. Attach the microphone and connect the cable.
6. Organize the cables neatly inside the helmet, then reinstall the helmet liner.

Nota: For full-face helmets, use the soft tube microphone. For half helmets, use the hard tube microphone.

2. Main Unit Clip Installation (Plastic Clamp)

1. Take the screwdriver from the package and loosen the two screws on the clamp.
2. Enganxeu el clamp to the left side of the helmet.
3. Premeu els cargols del clamp per assegurar-lo al seu lloc.
4. Feu lliscar la pista posterior del dispositiu al clamping track until it clicks into place.
5. Insert the earphone jack into the lower port of the intercom.

3. Main Unit Clip Installation (3M Adhesive Mount)

1. Peel off the protective film from the 3M adhesive.
2. Clean the surface on the left side of the helmet where the mount will be placed.
3. Stick the 3M adhesive mount firmly onto the helmet.
4. Slide the device's back track into the clamppista ing.
5. Insert the earphone jack into the lower port of the intercom.

Image: Visual instructions for installing the Fodsports T1 intercom using both the screw clamp and adhesive methods on a helmet.

Instruccions de funcionament

Encès/Apagat

To power on or off the device, press and hold the Power button and Mode button simultaneously for 3 seconds.

Canvi de mode

The T1 motorcycle intercom features a convenient one-button toggle between three functional modes: Rider-to-Rider Intercom, Universal Pairing, and Music Sharing. Simply press the Mode button once to switch between these modes.

Image: Diagram illustrating the one-click mode switching feature of the Fodsports T1, showing transitions between Bluetooth Intercom, Universal Pairing, and Music Sharing modes.

Intercomunicador de 2 vies

The T1 supports crystal-clear intercom communication for two riders within a range of up to 1000 meters.

1. Power on both T1 units and switch them to Bluetooth Intercom mode. (When powered on, the device defaults to Bluetooth Intercom mode).
2. Long press the Mode button on both units for 3 seconds to enter Pairing Mode. The green light will flash.
3. On one unit (e.g., Unit 1), click the Mode button once to enter Search Mode.
4. When the green light flashes slowly on both units, they have paired successfully.
5. To end or restore intercom, click the Power button.

Image: Two motorcyclists communicating via the Fodsports T1 intercom system, illustrating its 2-way communication capability over a distance of up to 1000 meters.

Compartir música

Share music with your riding partner using the music sharing mode.

1. Power on both T1 units and switch them to Music Sharing mode.
2. Long press the Mode button on both units for 3 seconds to enter Pairing Mode.
3. On one unit (e.g., Unit 1), click the Mode button once to enter Search Mode.
4. When both units have paired successfully, connect Unit 1 to your mobile phone via Bluetooth and play music.
5. Click the Function button on Unit 1 to play music. The music will be shared with the paired Unit 2.
6. To exit or restore music sharing, click the Power button.

Image: Two motorcyclists riding together, with musical notes flowing between their helmets, symbolizing the music sharing feature of the Fodsports T1 intercom.

Phone Pairing and Calls

Pair your mobile phone to the T1 intercom for calls and music playback.

1. Pairing Method 1 (Device Powered Off): When the device is powered off, press and hold the Power button and Mode button for 5 seconds to enter pairing mode.
2. Pairing Method 2 (Device Powered On): When the device is powered on, press and hold the Power button and Function button for 3 seconds to enter pairing mode.
3. Turn on the Bluetooth function on your phone and pair with "FODSPORTS T1". The pairing is complete once connected.
4. Contestar trucades: When a call comes in, press the Function button once to answer.
5. Finalització de trucades: After the call, press the Function button again to hang up.
6. Rebutjar trucades: Long press the Function button for 3 seconds to reject an incoming call.
7. Resposta automàtica: To switch between manual and automatic answering, press and hold the Power button and Function button for 3 seconds.

Image: A Fodsports T1 intercom unit shown next to a smartphone displaying its Bluetooth settings, indicating a successful connection to "FODSPORTS T1".

Control de reproducció de música

Control your music directly from the T1 intercom unit.

• Reproduir/pausar música: Click the Function button.
• Pujar el volum: Turn the knob right and keep holding it.
• Baixar el volum: Turn the knob left and keep holding it.
• Reprodueix la següent pista: Turn the knob to the right once.
• Play Previous Track: Turn the knob to the left once.

Comandament de veu

Activate your phone's voice assistant for hands-free control.

• Activa l'Assistent de veu: Premeu llargament el botó de funció durant 3 segons.

Ràdio FM

Enjoy FM radio on your ride.

• Radio ON: Double-click the Function button.
• Següent canal: Turn the knob to the right once.
• Canal anterior: Turn the knob to the left once.
• Radio OFF: Double-click the Function button.

Image: A visual representation of the Fodsports T1's FM radio function, showing a frequency display and various station options.

Manteniment

Carregant

The T1 features a convenient USB-C charging port that supports simultaneous charging and operation. It takes approximately 2 hours to fully charge.

• Temps de càrrega: 1.5-2 hores
• Temps de conversa: Més de 20 hores
• Hora d'intercomunicació: 22 hores
• Temps de reproducció de música: 25 hores
• Temps d'espera: Més de 300 hores

Image: The Fodsports T1 intercom unit connected via a USB-C cable for charging, with icons indicating its fast charging capability and extended battery life for talk, intercom, music, and standby times.

Resistència a l'aigua

The T1 intercom is designed with water-resistant features, making it suitable for various weather conditions.

Resolució de problemes

If you encounter any issues with your Fodsports T1 intercom, please refer to the following common solutions:

• Problemes de connectivitat: Ensure both devices are in the correct pairing mode and within range. Try restarting both the intercom units and your mobile device.
• Qualitat d'àudio: Check microphone and speaker connections. Ensure the microphone is positioned correctly near your mouth. The device features triple noise-canceling technology (DSP/CVC/built-in mics) to reduce ambient noise.
• Durada de la bateria: If battery life is shorter than expected, ensure the device is fully charged using the provided USB-C cable. Avoid extreme temperatures during charging and operation.
• Botons que no responen: Try resetting the device by powering it off and on again.
• For further assistance, please contact Fodsports customer support.

Especificacions

Garantia i Suport

The Fodsports T1 comes with a 1 anys de garantia del fabricant.

For product support, warranty claims, or any inquiries, please visit the official Fodsports Store or contact their customer service directly.

Official Fodsports Store: Visit the Fodsports Store