ETENWOLF S6SE Tire Inflator and USB C Charger User Manual

1. Introducció

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of your ETENWOLF S6SE Tire Inflator and USB C Charger. Please read this manual thoroughly before using the device to ensure optimal performance and safety.

Image 1.1: The ETENWOLF S6SE Tire Inflator and its accompanying USB C Charger.

2. Instruccions de seguretat

To prevent injury or damage to the device, observe the following safety precautions:

• Keep the device away from water, moisture, and flammable liquids or gases.
• Do not operate the inflator if it is damaged or malfunctioning.
• Assegureu-vos una ventilació adequada durant el funcionament per evitar el sobreescalfament.
• No deixeu el dispositiu sense vigilància durant l'ús.
• Mantenir fora de l'abast dels nens.
• Always check the recommended tire pressure for your vehicle before inflation.
• Disconnect the air hose from the tire valve before moving the inflator.
• Feu servir només els accessoris de càrrega proporcionats o recomanats.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• ETENWOLF S6SE Tire Inflator
• USB C Wall Charger (30W)
• Air Hose with threaded connector
• Various Nozzle Adapters (e.g., for balls, bicycles)
• USB-C to USB-C Charging Cable (may vary, often sold separately for charger)
• Manual d'usuari (aquest document)

4. Característiques del producte

The ETENWOLF S6SE combines a powerful tire inflator with a versatile USB C charger, offering convenience and efficiency.

4.1. Tire Inflator Features

• Dual-Cylinder Design: Provides fast and efficient inflation with an airflow of 1.5 CFM@0 PSI (42 L/min).
• Inflació ràpida: Inflates a 31-inch tire from 0 to 35 PSI in approximately 1 minute.
• Capacitat d'alta pressió: Supports a maximum pressure of 160 PSI.
• Precision Gauge: Accuracy within +/-1 PSI for precise inflation.
• Sistema de refrigeració integrat: Allows for continuous operation without overheating.
• 15600 mAh Lithium Battery: Capable of inflating multiple tires on a single charge (e.g., 18 F150 tires from 30 to 35 PSI).
• Modes predefinits: Includes 7 preset modes for various tire types (e.g., Pickup, RV, Car).
• Apagat automàtic: Stops inflation automatically once the target pressure is reached.
• Unitats de pressió múltiples: Easily switch between PSI, kPa, and BAR.
• 1000-Lumen LED Work Light: Provides illumination for nighttime or low-light conditions.

Imatge 4.1: Interna view highlighting the dual-cylinder motor for faster inflation.

Image 4.2: The inflator displaying different preset modes for various vehicle types.

Image 4.3: Illustration of the large 15600mAh battery capacity.

4.2. USB C Charger Features

• Càrrega ràpida de 30 W: Delivers up to 30W output with QC4+ and PD3.0 compatibility.
• Compatibilitat universal: Charges ETENWOLF products, phones, tablets, and other USB-C compatible devices.
• Proteccions de seguretat: Includes over-heat, over-voltage, over-charge, and short-circuit protection.

Image 4.4: The included 30W USB C wall charger.

Image 4.5: The USB C charger's compatibility with various devices.

Image 4.6: Visual representation of the charger's multiple safety protections.

5. Configuració

5.1. Càrrega del dispositiu

1. Connect the USB-C charging cable to the charging port on the ETENWOLF S6SE.
2. Plug the other end of the cable into the provided 30W USB C Wall Charger.
3. Insert the wall charger into a standard power outlet.
4. The display will indicate the charging status. Charge the device fully before first use.

Imatge 5.1: Ex.ample of charging a device using the 30W USB C charger.

5.2. Connectar la mànega d'aire

1. Locate the air outlet port on the ETENWOLF S6SE.
2. Screw the threaded end of the air hose securely onto the air outlet port.
3. Ensure the connection is tight to prevent air leakage during inflation.

6. Instruccions de funcionament

6.1. Ús de l'inflador de pneumàtics

1. Encès: Press the power button (usually labeled "START/PAUSE") to turn on the device. The display will illuminate.
2. Connecteu-vos a Tire: Screw the air hose connector onto the tire valve stem. Ensure a tight seal.
3. Seleccioneu el mode: Press the "MODE" button to cycle through the 7 preset inflation modes (e.g., Car, Motorcycle, Bicycle, Ball, Pickup, RV). Select the mode appropriate for your item.
4. Establir la pressió objectiu: Use the "+" and "-" buttons (or rotary dial) to adjust the desired target pressure. The device will remember your last set pressure for each mode.
5. Seleccioneu la unitat: Press the "UNIT" button to switch between PSI, kPa, and BAR pressure units.
6. Inici de la inflació: Press the "START/PAUSE" button to begin inflation. The device will automatically stop when the target pressure is reached.
7. Atura la inflació manualment: Press the "START/PAUSE" button again to stop inflation at any time.
8. Desconnectar: Unscrew the air hose connector from the tire valve. A small amount of air may escape, which is normal.
9. Llum de treball LED: Press the "LIGHT" button to turn the LED work light on or off.

Image 6.1: Close-up of the ETENWOLF S6SE control panel with display and buttons.

6.2. Using the USB C Charger Function

The ETENWOLF S6SE can also function as a power bank to charge other devices.

1. Ensure the ETENWOLF S6SE has sufficient battery charge.
2. Connect your device (phone, tablet, etc.) to the USB-C output port on the ETENWOLF S6SE using a compatible USB-C cable.
3. The ETENWOLF S6SE will automatically begin charging your connected device.

7. Manteniment

• Neteja: Netegeu el dispositiu amb un drap suau i sec. No utilitzeu productes químics agressius ni netejadors abrasius.
• Emmagatzematge: Store the inflator and charger in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the air hose is neatly stored to prevent kinks.
• Cura de la bateria: For optimal battery life, charge the device fully every 3-6 months if not in regular use.
• Inspecció de la mànega: Periodically inspect the air hose and connectors for any signs of wear or damage. Replace if necessary.

8. Solució De Problemes

9. Especificacions

• Model: ETENWOLF S6SE
• Flux d'aire: 1.5 CFM@0 PSI (42 L/min)
• Pressió d'inflació màxima: 160 PSI
• Precisió del calibre: +/-1 PSI
• Capacitat de la bateria: 15600 mAh de liti
• Port de càrrega: USB-C 30W (Input/Output)
• Llum de treball LED: 1000 lúmens
• Data de primera disponibilitat: 12 de març de 2025
• ASIN: B0FH9MZ22X

10. Garantia i Suport

Specific warranty information is not provided in this document. For warranty details, product support, or service inquiries, please refer to the product packaging, the official ETENWOLF website, or contact your retailer directly.

Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.