Fanbulous 52" Ceiling Fan with Lights and Remote Control

1. Informació important de seguretat

Please read this manual carefully before installation and use. Keep these instructions for future reference. Improper installation or use can lead to electric shock, fire, or personal injury.

• Desconnecteu sempre l'alimentació a l'interruptor principal abans d'instal·lar, netejar o fer el manteniment del ventilador.
• All electrical connections must be in accordance with local codes, ordinances, and the National Electrical Code. If you are unfamiliar with wiring, consult a qualified electrician.
• Assegureu-vos que el lloc d'instal·lació pugui suportar el pes del ventilador (aproximadament 15 lliures).
• No doblegueu els porta-fulles durant la instal·lació o la neteja.
• Ensure the fan blades are at least 7 feet (2.1 meters) from the floor and 30 inches (76 cm) from any wall or obstruction.
• This fan is suitable for indoor and outdoor covered use. Do not expose to direct water spray.

2. Contingut del paquet

Verifiqueu que tots els components que s'enumeren a continuació s'inclouen al paquet:

• Fan Motor Host
• Suport de muntatge
• Coberta de Canopy
• Lamp Body (LED Light Kit)
• Remote Controller & Receiver
• Fan Blades (3 pieces, each composed of 2 parts)
• Screw Parts (various screws, wire nuts, expansion tubes)
• Manual d'instruccions
• Lampombra

Imatge: Més deview of all included accessories and parts.

3. Instruccions de muntatge

Follow these steps to assemble your Fanbulous ceiling fan:

3.1. Fan Blade Assembly

1. Identify the two parts of each fan blade (labeled A, B, C). Connect the corresponding parts together.
2. Tighten the 5 blade connection screws to secure the two parts of each blade. Repeat for all three blades.

3.2. Motor Body and Blade Arm Installation

1. Remove the 6 screws from the motor body. These screws will be used to attach the blade arms.
2. Install the assembled blade arms onto the motor body, aligning the holes. Secure them with the screws removed in the previous step.

3.3. Muntatge del kit de llum

1. Remove the 3 screws from the triangle plate on the fan motor host.
2. Connect the LED board wire connector to the corresponding connector on the lamp cos.
3. Instal·leu el lamp body onto the main motor body and tighten the screws.
4. Localitza el punt de bloqueig a la lamp cos i cargolar la lampshade by rotating it clockwise until secure.

4. Instruccions d'instal·lació

Before proceeding, ensure power is disconnected at the circuit breaker.

4.1. Instal·lació del suport de muntatge

1. Remove the two round hole screws from the canopy. Loosen the two remaining screws and rotate the mounting bracket to remove it from the canopy.
2. Mount the bracket to the ceiling using appropriate accessory screws based on the ceiling material:
   • Cement Ceiling: Drill holes, then use expansion tubes and self-tapping screws for fixing.
   • Sostre de fusta: Utilitzeu cargols autoperforants per clavar-los al sostre de fusta.
3. Use the safety rope to hang the ceiling fan to the bracket hook for temporary support during wiring.

4.2. Cablejat elèctric

Connect the wires in the same color:

• Connect the "Neutral" (White) wire from the ceiling to the white wire of the fan.
• Connect the "Live" (Black) wire from the ceiling to the black wire of the fan.
• Connect the "Ground wire" (Green or Yellow/Green or Bare) from the ceiling to the green wire of the fan.

NOTE: If there are 4 wires, block the red wire with a wire nut (contained in parts) and electrical tape (not included).

Connecteu els cables entre el controlador i el motor del ventilador: connecteu el connector de 3 pins i el connector de 2 pins.

4.3. Instal·lació de la marquesina

1. Install the reinforcement plate on the ceiling canopy, aligning it with the holes, then tighten the 6 connection screws.
2. Align the canopy L slot to the bracket screw, rotate to a certain position, and then lock the other 2 screws. Ensure that all 4 screws are tightened securely.

5. Instruccions de funcionament

Your Fanbulous ceiling fan comes with a remote control for convenient operation.

5.1. Funcions de control remot

Image: Diagram of the remote control and its functions.

• Tot apagat: Turns off all fan and light functions.
• Ventilador activat / desactivat: Toggles the fan motor on or off.
• Light On/Off CCT Switch: Turns the light on/off and cycles through 3 color temperatures (3000K Warm Light, 4000K Natural Light, 6000K Cold White Light). The light has a memory function, remembering the last setting after 10 seconds.
• Fan Speed Setting (1-6): Ajusta la velocitat del ventilador d'1 (la més baixa) a 6 (la més alta).
• Quick Timer Setting (1H/4H/8H): Configura el ventilador perquè s'apagui automàticament després de 1, 4 o 8 hores.
• Direcció del flux d'aire: Switches between summer (forward cool airflow) and winter (reverse warm air circulation) modes.
• Vent natural: Activates a fluctuating fan speed to simulate natural breezes.
• Mode antirobatori: (Refer to specific remote instructions if available, typically cycles light/fan to simulate occupancy).
• Silenciar: Silences remote control beeps.
• Delay off in 5 minutes: Turns off the fan after a 5-minute delay.

Image: Illustration of reversible DC motor function for summer and winter airflow.

Image: Visual representation of the 3 adjustable color temperatures (3000K, 4000K, 6000K).

6. Manteniment

Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del ventilador de sostre.

• Neteja: Per netejar el ventilador, netegeu-lo amb un drap suau iamp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or components.
• Neteja de fulles: Netegeu la pols de les fulles regularment per evitar l'acumulació de pols, que pot fer que es balancegin.
• Cargols de tensió: Periodically check all screws on the fan body and blade attachments to ensure they are tight. Loose screws can cause noise or wobbling.
• Font de llum: The integrated LED light source is designed for long life and is not user-replaceable. If the light fails, contact customer support.

7. Solució De Problemes

Si teniu problemes amb el ventilador, consulteu els següents problemes i solucions habituals:

8. Especificacions

Image: Diagram showing fan dimensions and key specifications.

9. Garantia i Suport

Fanbulous provides excellent after-sales service and a two-year warranty for this product. Our dedicated team is ready to assist you with any questions or concerns, ensuring your satisfaction long after your purchase. Technical support is available 24/7.

For assistance, please contact Fanbulous customer service through your purchase platform or the contact information provided with your product.