BTF-LIGHTING RC07RFB-1XC01RFUS

BTF-LIGHTING RC07RFB & C01RF RF 2.4GHz Wireless Tuya Controller Kit Instruction Manual

Model: RC07RFB-1XC01RFUS

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your BTF-LIGHTING RC07RFB RF 2.4GHz Wireless Remote and C01RF Tuya Controller Kit. This kit is designed to control single-color PWM LED strip lights, offering smooth dimming and convenient control options. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Informació de seguretat

  • Assegureu-vos que la font d'alimentació voltage matches the LED strip and controller requirements (DC5V/12V/24V).
  • Do not exceed the maximum current ratings: 5A for Port1 and 12A for Port2.
  • This product is designed for indoor use only and is not water-resistant.
  • Disconnect power before any installation or wiring changes.
  • Keep the device away from direct sunlight, high temperatures, and moisture.
  • No intenteu reparar o modificar el dispositiu vosaltres mateixos. Poseu-vos en contacte amb personal qualificat per al servei tècnic.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

  • 1 × RC07RFB Remote
  • 1 × C01RF Tuya Controller
  • 1 × Magnetic Back Holder
  • 1 × RC07RFB Manual
  • 1 × C01RF Manual

Note: Tuya Gateway and 3A batteries are not included and must be purchased separately.

4. Característiques del producte

  • Llums compatibles: Supports PWM single-color LED strips (e.g., 5050, 3528, 2835, COB, Neon).
  • Transmissió sense fil de 2.4 GHz: The RC07RFB remote offers a control range up to 98ft (30m).
  • Ajust de brillantor: Sensitive touch-slide control for 1% to 100% dimming.
  • Magnetic Wall-Mount: Remote features a magnetic design for convenient storage.
  • Voltage Compatibilitat: Works with DC5V/12V/24V LED strips and power supplies.
  • Tuya Smart Integration: Compatible with GW01W Wi-Fi+Bluetooth Dual Mode Tuya gateway (sold separately) for Smart Life/Tuya Smart APP control and third-party voice control (Alexa, Google Home).

5. Especificacions

CaracterísticaDescripció
MarcaBTF-LIGHTING
ModelRC07RFB-1XC01RFUS
ColorColor únic
Entrada VoltageDC5V/12V/24V
Max Current (Port1)5A
Max Current (Port2)12A
Tecnologia sense fils2.4GHz RF
Mètode de controlRemote, Tuya App (with gateway)
Ús interior/exteriorInterior
Nivell de resistència a l'aiguaNo resistent a l'aigua

6. Configuració i instal·lació

6.1 Esquema de cablejat

Follow the diagram below to correctly connect the power supply, C01RF controller, and LED strip. Ensure all connections are secure before applying power.

Wiring diagram showing connections between AC 110V-220V power supply, C01RF single color LED controller, and a 24V LED strip. The RC07RFB remote is shown wirelessly controlling the setup.
Figure 6.1: Wiring Diagram for C01RF Controller and Single Color LED Strip.

6.2 Remote Mounting Options

The RC07RFB remote can be mounted using one of three methods:

  1. Method 1: Install with screws. Use the provided magnetic back holder and screws to secure it to a wall.
  2. Method 2: Install with double-sided tape. Attach the magnetic back holder using strong double-sided adhesive tape.
  3. Method 3: Magnetic attraction. The remote can directly attach to any metal surface due to its magnetic design.
Three illustrations showing different mounting methods for the RC07RFB remote: with screws, with double-sided tape, and magnetic attraction to a metal surface.
Figure 6.2: Remote Control Mounting Methods.

7. Instruccions de funcionament

7.1 RC07RFB Remote Control

The RC07RFB remote features a touch-sensitive slider for brightness control and a power button.

Diagram of the RC07RFB remote control highlighting its features: Indicator Light (red for brightness adjustment mode), Brightness Slider (touch to dim from 1%-100%), and ON/OFF Button (short-press to turn lights on/off).
Figure 7.1: RC07RFB Remote Control Features.
  • Botó ON/OFF: Short-press to turn the LED strip lights on or off.
  • Control lliscant de brillantor: Touch or slide your finger along the slider to adjust the brightness from 1% to 100%. The indicator light will show red when in brightness adjustment mode.
Image demonstrating smooth dimming from 1% to 100% brightness using the remote's slider, with a living room scene transitioning from dark to bright.
Figure 7.2: Smooth Brightness Dimming.

7.2 App Control (Requires Tuya Gateway)

To enable app control and voice assistant integration, a GW01W Wi-Fi+Bluetooth Dual Mode Tuya gateway is required (sold separately). Once connected to the gateway, you can control your LED strip lights via the Smart Life or Tuya Smart APP, and integrate with third-party voice control systems like Alexa and Google Home.

Video 7.1: Demonstration of the RC07RFB & C01RF Controller Kit in action, showcasing les seves característiques i ús.

8. Instruccions d'aparellament

To pair the RC07RFB remote with the C01RF controller:

  1. Ensure the C01RF controller is powered on and connected to the LED strip.
  2. On the C01RF controller, locate the 'SET' button.
  3. Press and hold the 'SET' button on the controller for approximately 3 seconds until the connected LED strip flashes.
  4. Within 10 seconds, short-press the ON/OFF button on the RC07RFB remote.
  5. The LED strip will flash again, indicating successful pairing.

To unpair, repeat steps 1-3, then short-press the ON/OFF button on the remote 5 times quickly. The LED strip will flash to confirm unpairing.

9. Funcions avançades

9.1 Multi-Controller Control

One RC07RFB remote can control numerous C01RF controllers. Each C01RF controller can be controlled by up to five RC07RFB remotes simultaneously.

Diagram showing one RC07RFB remote wirelessly controlling five separate C01RF controllers, each connected to an LED strip in different rooms of a house layout.
Figure 9.1: One Remote Controlling Multiple Controllers.

9.2 Auto-Transmitting Function

The C01RF controller features an auto-transmitting function. One controller can transmit signals from the remote control to another controller within 30 meters, as long as there is another strip controller within that range. This extends the effective control distance.

Diagram illustrating the auto-transmitting function where an RC07RFB remote sends a signal to a C01RF controller, which then relays the signal to subsequent controllers within 30m, extending the control range.
Figure 9.2: Auto-Transmitting Function.

10. Solució De Problemes

  • Els llums no responen: Check power connections to the controller and LED strip. Ensure the remote has working batteries. Re-pair the remote and controller if necessary.
  • Control intermitent: Ensure the remote is within the 30m range of the controller or another auto-transmitting controller. Check for potential 2.4GHz interference from other devices.
  • Dimming not smooth: Verify that the LED strip is a compatible PWM single-color type. Ensure the power supply is stable.
  • El control de l'aplicació no funciona: Confirm the Tuya Gateway (GW01W) is properly set up and connected to your Wi-Fi network. Ensure the C01RF controller is successfully added to the Smart Life/Tuya Smart APP.

11. Manteniment

To ensure the longevity and optimal performance of your controller kit:

  • Clean the remote and controller with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Avoid exposing the devices to extreme temperatures or humidity.
  • Replace remote batteries when performance degrades.

12. Garantia i Suport

BTF-LIGHTING products come with a standard manufacturer's warranty. For specific warranty details, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official BTF-LIGHTING weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

© 2026 BTF-LIGHTING. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.