MOMMED Pulse Oximeter YM201 User Manual

1. Introducció

The MOMMED Pulse Oximeter YM201 is a non-invasive device intended for spot-checking of functional oxygen saturation of arterial hemoglobin (SpO2) and pulse rate (PR) through the finger. It is suitable for use in sports and aviation. This device is not intended for continuous monitoring or medical diagnosis.

Image 1: MOMMED Pulse Oximeter YM201 device. This image shows the compact, white pulse oximeter with its digital display showing SpO2 and PR readings.

2. Informació i precaucions de seguretat

• This device is intended for sports and aviation use only. It is not a medical device and should not be used for medical diagnosis or treatment.
• No utilitzeu l'oxímetre en un entorn de ressonància magnètica o TC.
• No utilitzeu l'oxímetre en situacions que requereixin una monitorització contínua.
• Avoid direct sunlight or strong light exposure, which may affect measurement accuracy.
• Keep the device away from flammable substances, corrosive gases, and high temperatures.
• Ensure the finger is clean and dry before measurement. Nail polish or artificial nails may affect accuracy.
• Do not insert a wet finger into the probe.
• The device is not suitable for infants or children with small fingers.

3. Producte acabatview

The MOMMED Pulse Oximeter YM201 features a clear display and a single button for operation. Key components include:

• Botó d'encesa: Used to turn the device on/off and navigate menus.
• Pantalla de visualització: Shows SpO2, Pulse Rate (PRbpm), Perfusion Index (PI%), Heart Rate Bar Graph, and Heartbeat indicator.
• Finger Probe: Where the finger is inserted for measurement.
• Compartiment de la bateria: Located at the rear for AAA batteries.

Image 2: Interface Data Introduction. This diagram labels the various elements on the oximeter's display, including Blood Oxygen Saturation (%SpO2), Pulse Rate (PRbpm), Perfusion Index (PI%), Heart Rate Bar Graph, Heartbeat symbol, and the Power Button.

4. Configuració

4.1 Instal·lació de la bateria

The device requires two AAA batteries for operation. These are typically included with the product.

1. Obriu la tapa de la bateria situada a la part posterior del dispositiu.
2. Insert two AAA batteries into the compartment, ensuring correct polarity (+/-).
3. Tanqueu la tapa de la bateria amb seguretat.

Avís:

• Incorrect battery installation may damage the device.
• Traieu les piles si no heu d'utilitzar el dispositiu durant un període prolongat per evitar fuites.

Image 3: Battery Installation Diagram. This image shows the battery compartment and how to correctly insert the two AAA batteries.

4.2 Lanyard Installation (Optional)

A lanyard is provided for convenient carrying. To attach it:

1. Pass the thin end of the lanyard through the hanging hole on the oximeter.
2. Pass the thicker end of the lanyard through the thin end and tighten.

5. Instruccions de funcionament

5.1 Prendre una mesura

1. Ensure the oximeter has batteries installed.
2. Obriu el clamp and insert one finger (preferably the index, middle, or ring finger) into the rubber opening of the oximeter. Ensure the finger is fully inserted and rests flat on the sensor.
3. Allibera el clamp.
4. Premeu el botó d'engegada una vegada per encendre el dispositiu.
5. The measurement interface will appear. Keep your hand still during the measurement.
6. Read the SpO2 and Pulse Rate values displayed on the screen. Results typically appear within 6-8 seconds.
7. The device will automatically power off after 10 seconds of inactivity once the finger is removed.

Image 4: Display Data Introduction. This graphic illustrates the various readings shown on the oximeter's screen, including Blood Oxygen Saturation, Pulse Rate, Perfusion Index, Heart Rate Bar Graph, and Heartbeat.

5.2 Menu Settings and Personalization

To access the menu settings:

1. With the device on, press and hold the power button for approximately 2 seconds. The menu interface will appear.
2. Short press the power button to cycle through menu options.
3. Long press the power button to select an option or confirm a setting.

Available settings include:

• Alarma: Turn alarm function ON or OFF.
• So: Turn audible alerts ON or OFF.
• Brillantor: Adjust display brightness level (typically 1-5).
• Valors per defecte: Restaura la configuració de fàbrica.
• Configuració d'alarma: Set high and low limits for SpO2 and PR alarms.

Image 5: Personalize Setting Menu. This graphic displays the general setup and alarm setup menus, showing options like alarm on/off, sound, brightness, and setting SpO2 and PR alarm thresholds.

5.3 Funció de gravació

The oximeter can store recent measurement data. The first measurement within 30 seconds of turning on is saved, and the device can store up to the last 20 measurements.

Per tornarview dades emmagatzemades:

1. Access the menu settings (as described in 5.2).
2. Navigate to "DATA REVIEW" and long press to enter.
3. Short press to scroll through the stored measurements (M1, M2, etc.).
4. Long press to exit the data review.

Image 6: Record Function. This image illustrates how the oximeter stores and displays the last 20 measurements, showing O2 (SpO2) and PR (Pulse Rate) values for multiple entries.

6. Manteniment

6.1 Neteja

The oximeter should be cleaned regularly to ensure proper hygiene and function.

• Device Exterior: Wipe the exterior of the device with a soft cloth dampened with a mild disinfectant (e.g., 70% ethanol).
• Finger Probe: Clean the inside of the finger probe with a soft cloth dampened with 70% ethanol before and after each use.
• No submergiu el dispositiu en líquids.
• No utilitzeu netejadors abrasius ni productes químics durs.

6.2 Substitució i emmagatzematge de la bateria

• Canvieu les piles quan aparegui l'indicador de bateria baixa a la pantalla.
• If the device will not be used for a long period, remove the batteries to prevent leakage and damage.
• Guardeu l'oxímetre en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.

7. Solució De Problemes

Consulteu la taula següent per veure els problemes habituals i les seves solucions:

8. Especificacions

• Nom del model: YM201
• Interval de mesura: 70% - 100% SpO2
• Tipus de visualització: OLED
• Requisits d'alimentació: 2 x AAA 1.5V alkaline batteries
• Corrent de funcionament: 25-50 mA
• Dimensions: 57 x 30 x 31 mm
• Pes: 28g (bare machine)
• Apagat automàtic: Després de 10 segons d’inactivitat
• Temperatura de funcionament: 5 °C - 40 °C (41 °F - 104 °F)
• Storage/Transportation Temperature: -10 °C - 40 °C (14 °F - 104 °F)
• Humitat: 15% - 80% non-condensing
• Pressió atmosfèrica: 70kPa - 106kPa

9. Garantia i Suport

For warranty information, technical support, or to obtain a digital copy of this user manual, please contact MOMMED customer service.

• Correu electrònic: Support@mommed.com
• Weblloc: www.mommed.com