Andeman Ep155 & Ep177 Car Jump Starter with Air Compressor User Manual

1. Introducció

This manual provides essential information for the safe and effective operation of your Andeman Ep155 or Ep177 Car Jump Starter with Air Compressor. Please read this manual thoroughly before using the device and retain it for future reference. This device is designed to jump start 12V vehicles and, for the Ep177 model, also functions as a portable tire inflator and power bank.

2. Informació de seguretat

WARNING: Improper use can result in injury or damage to the device and vehicle. Always follow these safety guidelines.

Mantenir fora de l'abast dels nens.
No submergiu el dispositiu en aigua.
No opereu en atmosferes explosives, com en presència de líquids, gasos o pols inflamables.
Assegureu-vos una ventilació adequada durant l'ús.
Do not disassemble the device. Contact qualified service personnel for repairs.
Eviteu l'exposició directa a la llum solar o a temperatures elevades.
Feu servir només el llapis intel·ligent proporcionat.amps i accessoris.
Assegureu-vos que el dispositiu estigui completament carregat abans d'utilitzar-lo per obtenir un rendiment òptim.
The device features 10 advanced safety protections, including Overload Protection, Sparks Protection, Reverse Charges Protection, Reverse Polarities Protection, Over Currents Protection, Low Temperature Protection, Over Charges Protection, and Short Circuits Protection.

Diagram illustrating 10 safety protections of the Andeman jump starter — Figure 2.1: The Andeman jump starter incorporates 10 safety protections for secure operation, including safeguards against overcharge, over-discharge, overcurrent, short circuit, overvoltage, reverse connection, over temperature, voltage regulation, reverse charge, and reverse polarity.

3. Producte acabatview i Components

Your Andeman Car Jump Starter is a multi-functional device designed for emergency vehicle starting, and for the Ep177 model, also includes a portable air compressor and power bank capabilities.

Andeman jump starter with smart clamps and inflation nozzles — Figure 3.1: The Andeman jump starter unit shown with its smart battery clamps and various inflation nozzles for different applications.

Andeman jump starter demonstrating both jump start and tire inflation functions — Figure 3.2: This image highlights the dual functionality of the Ep177 model, serving as both a 4000A jump starter and a 150PSI tire inflator.

Contingut del paquet:

Andeman Car Jump Starter (Ep155 or Ep177)
Bateria intel·ligent Clamps
Cable de càrrega USB-C
Inflation Nozzles (for Ep177 model)
Manual d'usuari

4. Especificacions

Característica	Ep155 Model	Ep177 Model
Corrent màxima	3000A	4000A
Capacitat de la bateria	20000 mAh	24000 mAh
Compatibilitat del motor (gasolina)	Fins a 9.0 L	Fins a 8.5 L
Compatibilitat de motors (dièsel)	Fins a 7.0 L	Fins a 7.0 L
Starts per Charge	Fins a 80 vegades	Fins a 70 vegades
Temps d'espera	24 mesos	48 mesos
Air Compressor (PSI)	N/A	Up to 150PSI
Charging Input (Type-C)	5V/3A, 9V/2A, 12V/1.5A
Sortida USB-A	QC3.0
Sortida USB-B	5V/3A
Sortida de corrent continu	15 V
Temps de càrrega complet	Aproximadament 1.8 hores
Llanterna LED	240 Lumens, 36 hours battery life

Andeman 4000A Jump Starter connected to a car battery in an engine bay — Figure 4.1: The Ep177 model, a 4000A jump starter, is suitable for various 12V vehicles, capable of starting 8.5L gas or 7L diesel engines.

5. Configuració i càrrega

5.1 Càrrec inicial

Before first use, fully charge the jump starter. Connect the provided USB-C charging cable to the device's Type-C input port and a suitable USB power adapter (not included). The device supports bi-directional fast charging, achieving a full charge from 0% to 100% in approximately 1.8 hours.

Andeman jump starter being charged via Type-C cable in a car console — Figure 5.1: The jump starter can be fast-charged via its Type-C port, allowing for quick readiness. A 10-minute charge can provide enough power for a jump start.

5.2 Comprovació del nivell de la bateria

The device features a digital display or indicator lights to show the current battery level. Ensure the device has sufficient charge before attempting to jump start a vehicle or inflate tires.

6. Instruccions de funcionament

6.1 Arrencada amb salt d'un vehicle

Assegureu-vos que l'arrencador estigui carregat com a mínim al 50%.
Apagueu el contacte del vehicle i tots els accessoris.
Connecteu el vermell (+) clamp al terminal positiu (+) de la bateria del vehicle.
Connecteu el negre (-) clamp al terminal negatiu (-) de la bateria del vehicle o a una peça metàl·lica sòlida i sense pintar del bloc del motor.
Connecteu l'smart clamp connector into the jump starter's port. The indicator light on the smart clamp should turn green, indicating a correct connection. If it's red or flashing, check connections and battery voltage.
Start the vehicle. If it doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
Once the vehicle starts, immediately disconnect the smart clamp connector from the jump starter.
Traieu el cl negre (-)amp primer, després el cl vermell (+)amp de la bateria del vehicle.

6.2 Using the Air Compressor (Ep177 Model Only)

The Ep177 model features a built-in air compressor capable of delivering up to 150PSI.

Connecteu la mànega d'aire a la tija de la vàlvula del pneumàtic. Assegureu-vos que la connexió sigui segura per evitar fuites d'aire.
Power on the jump starter. The current tire pressure will be displayed.
Utilitzeu els botons '+' i '-' per ajustar la pressió desitjada.
Press the inflation button to start the compressor. The compressor will automatically stop once the preset pressure is reached.
Desconnecteu la mànega d'aire de la vàlvula del pneumàtic.

Note: For continuous use, it is recommended to rest the compressor for 10 minutes after every 10 minutes of operation to prevent overheating. A full charge can inflate 195/60 R15 tires from 0 to full approximately 4-5 times.

Andeman jump starter with digital display showing tire pressure and inflation icons — Figure 6.1: The Ep177 model's digital display shows current pressure and allows setting target pressure for tire inflation. It can inflate various items including car, motorcycle, bicycle tires, and sports equipment.

6.3 Ús com a bateria externa

The jump starter can also function as a portable power bank to charge electronic devices.

Connect your device's charging cable to the appropriate output port on the jump starter (USB-A QC3.0, USB-B 5V/3A, or Type-C 5V/3A, 9V/2A, 12V/1.5A).
El dispositiu començarà a carregar-se automàticament.
The DC15V output port can power compatible devices like tire inflators (if not using the built-in one) or car refrigerators.

Andeman jump starter charging multiple devices like a laptop, smartwatch, and smartphone — Figure 6.2: The 24000mAh capacity allows the jump starter to serve as a power bank, compatible with over 1000 devices, including laptops, smartwatches, and smartphones.

6.4 Ús de la llanterna LED

The built-in 240 lumens LED flashlight offers multiple modes for various situations.

Press the flashlight button once to turn on the steady light.
Press again for SOS mode (flashing slowly).
Press a third time for Strobe mode (flashing rapidly).
Premeu una quarta vegada per apagar la llanterna.

The flashlight provides up to 36 hours of battery life.

Andeman jump starter's LED flashlight illuminating various scenarios like camping, roadside emergency, power failure, and car repair — Figure 6.3: The 240 lumens LED flashlight provides illumination for outdoor camping, roadside emergencies, power failures, and car repair tasks.

7. Manteniment

7.1 Càrrega

To maintain optimal battery health, recharge the jump starter every 3-6 months, even if not in use. This prevents deep discharge and extends battery life.

7.2 Emmagatzematge

Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
Keep the device and accessories in the provided carrying case to protect them from damage.

7.3 Neteja

Netegeu el dispositiu amb un drap suau i sec. No utilitzeu productes químics agressius ni netejadors abrasius.

8. Solució De Problemes

8.1 Vehicle Does Not Start

Comproveu el nivell de la bateria: Ensure the jump starter has sufficient charge.
Comproveu les connexions: Verifiqueu que el cl intel·ligentampestan connectats correctament als terminals correctes de la bateria (vermell a positiu, negre a negatiu).
Smart clamp indicador: If the indicator is red or flashing, refer to the smart clamp's instructions for error codes.
Vehicle battery condition: If the vehicle battery is severely damaged or completely dead, the jump starter may not be able to start it.

8.2 Air Compressor Not Working (Ep177 Only)

Comproveu el nivell de la bateria: Ensure the jump starter has sufficient charge.
Connexió de la mànega: Verify the air hose is securely connected to both the device and the tire valve.
Sobreescalfament: If the compressor has been running for an extended period, it may have overheated. Allow it to cool down for 10-15 minutes before attempting to use it again.

8.3 El dispositiu no es carrega

Cable: Ensure the USB-C charging cable is not damaged and is properly connected.
Adaptador d'alimentació: Verify the USB power adapter is functional and provides adequate power output.

9. Garantia i Suport

Your Andeman jump starter is UL Certified, ensuring it meets stringent safety standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Andeman weblloc.

For further assistance, please contact Andeman customer support.