1. Informació important de seguretat
Please read all instructions carefully before using the AIRMATE HP20242R ceramic heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Col·loqueu sempre l'escalfador sobre una superfície ferma i anivellada.
- Do not operate the heater near water or in damp ubicacions.
- Keep flammable materials (furniture, curtains, paper, clothing, etc.) at least 1 meter (3 feet) from the front, sides, and rear of the heater.
- No introduïu ni deixeu que entrin objectes estranys a cap obertura de ventilació o d'escapament, ja que això podria provocar una descàrrega elèctrica o incendi, o danyar l'escalfador.
- This heater is equipped with an automatic protecció contra volcaments switch that will shut off the unit if it is accidentally knocked over.
- The heater also features protecció contra el sobreescalfament, which will automatically turn off the unit if it reaches an unsafe temperature.
- Ensure the power cord is not damaged and is properly plugged into a suitable electrical outlet.
- No utilitzeu aquest escalfador amb un programador, un temporitzador, un sistema de control remot independent o qualsevol altre dispositiu que engegui l'escalfador automàticament, ja que hi ha risc d'incendi si l'escalfador està cobert o col·locat incorrectament.
- Aquest aparell no està pensat per ser utilitzat per persones (inclosos nens) amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat.
- Els nens han de ser supervisats per assegurar-se que no juguin amb l'aparell.
2. Instruccions de configuració
Follow these steps to set up your AIRMATE HP20242R ceramic heater:
- Desempaquetar l'escalfador: Traieu amb cura l'escalfador del seu embalatge. Conserveu l'embalatge per a futurs emmagatzematges o transports.
- Col·locació: Place the heater on a stable, flat, and heat-resistant surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater to allow for proper airflow and to prevent fire hazards. Do not place it directly under a power outlet.
- Connexió d'alimentació: Connecteu el cable d'alimentació a una presa de corrent amb connexió a terra. Assegureu-vos que el volumtage of your power supply matches the rating label on the heater.

Image: The AIRMATE HP20242R heater, highlighting its compact dimensions (62.3cm height, 24.4cm base), integrated carry handle, and included remote control for convenient operation.
3. Instruccions de funcionament
Your AIRMATE HP20242R heater offers various settings for optimal comfort. You can operate the heater using the control panel on the unit or the included remote control.
3.1 Encès/Apagat
- Premeu el botó Botó d'encesa on the control panel or remote to turn the heater on or off.
3.2 Control de temperatura
The heater allows you to set your desired room temperature between 18°C and 35°C.
- Utilitza el Temperatura pujada (+) i Baixada de temperatura (-) botons per ajustar la temperatura objectiu.
- The heater will automatically adjust its heating output to maintain the set temperature.

Image: The heater's display indicating the adjustable temperature range from 18°C to 35°C, along with icons for Smart Mode, Energy Saving Mode (ECO), and Sleep Mode, and two heat settings.
3.3 Modes de funcionament
Select from three distinct operating modes:
- Mode intel·ligent: Automatically adjusts heating power based on the ambient temperature to reach and maintain the set temperature efficiently.
- Mode d'estalvi d'energia (ECO): Optimizes power consumption while providing comfortable warmth.
- Mode de repòs: Operates at a lower noise level and maintains a gentle warmth, ideal for use during sleep.
3.4 Configuració de calor
The heater features two heat settings to suit your preference and room size.
- Premeu el botó Botó de mode to cycle through the available heat settings.
3.5 Funció d'oscil·lació
Activate the oscillation function for wider heat distribution across the room.
- Premeu el botó Botó d'oscil·lació to start or stop the 80° oscillation.
- This feature helps to spread warmth evenly, ensuring a comfortable environment.

Image: The AIRMATE HP20242R heater in a room, illustrating its 80-degree oscillation capability for broad heat distribution, effectively warming a wider area.
3.6 Funció de temporitzador
Set the heater to operate for a specific duration using the 24-hour timer.
- Premeu el botó Botó del temporitzador to set the desired operating time. Each press typically increases the time by one hour.
- The heater will automatically turn off once the set time has elapsed.
4. Manteniment
Una neteja regular i un emmagatzematge adequat garantiran la longevitat i el funcionament eficient del vostre escalfador.
4.1 Neteja
- Abans de la neteja: Desendolleu sempre l'escalfador de la presa de corrent i deixeu-lo refredar completament abans de netejar-lo.
- Neteja exterior: Netegeu les superfícies exteriors de l'escalfador amb un drap suau iamp cloth. Do not use abrasive cleaners, waxes, or polishes as these may damage the finish.
- Entrada/sortida d'aire: Use a vacuum cleaner with a brush attachment to gently remove dust and lint from the air inlet and outlet grilles. Ensure these areas are clear of obstructions for optimal performance.
- No submergir: No submergiu mai l'escalfador en aigua ni en cap altre líquid.
4.2 Emmagatzematge
- Si guardeu l'escalfador durant un període prolongat, netegeu-lo a fons tal com s'ha descrit anteriorment.
- Store the heater in its original packaging in a cool, dry place, away from direct sunlight and moisture.
- No col·loqueu objectes pesats a sobre de l'escalfador durant l'emmagatzematge.
5. Solució De Problemes
If you encounter issues with your AIRMATE HP20242R heater, please refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| L'escalfador no s'encén. | Sense font d'alimentació. Interruptor antibolcada activat. S'ha activat la protecció contra el sobreescalfament. | Ensure the power cord is securely plugged in and the outlet is functional. Place the heater upright on a flat surface. Unplug the heater, let it cool for 30 minutes, then plug it back in. Clear any obstructions around the air inlets/outlets. |
| L'escalfador està encès però no produeix calor. | S'ha seleccionat la temperatura baixa. Ambient temperature is higher than set temperature. | Augmenteu el nivell de calor. Adjust the target temperature to a higher value than the current room temperature. |
| Soroll inusual durant el funcionament. | Pols o deixalles al ventilador. L'escalfador no està sobre una superfície estable. | Unplug and clean the air inlets/outlets. If noise persists, contact customer support. Assegureu-vos que l'escalfador estigui sobre una superfície plana i estable. |
If the problem persists after trying these solutions, please contact AIRMATE customer support.
6. Especificacions del producte
| Característica | Detall |
|---|---|
| Model | HP20242R |
| Marca | AERI |
| Tipus | Escalfador de ceràmica |
| Potència de sortida | 2000W |
| Dimensions (P x A x A) | 18D x 18W x 62H centímetres |
| Interval de temperatura | 18 °C - 35 °C |
| Angle d'oscil·lació | 80° |
| Nivell de soroll | Approximately 32dB (in Sleep Mode) |
| Característiques de seguretat | Tip-over protection, Overheat protection, V-0 flame-retardant material, Child lock |
| Piles necessàries | No (per a la unitat principal) |

Image: The 2000W PTC fast heating element of the AIRMATE HP20242R, illustrating its quiet operation at 32dB and efficient heat output, providing 200% larger heating volume.

Image: A visual representation of the AIRMATE HP20242R's comprehensive safety features, including child lock, V-0 flame-retardant material, overheat protection, tip-over protection, and an enhanced safety plug.
7. Garantia i atenció al client
For warranty information or if you require assistance with your AIRMATE HP20242R heater, please refer to the warranty card included with your purchase or contact AIRMATE customer support.
Please have your model number (HP20242R) and purchase date ready when contacting support.