ciciglow FDM Mini 3D Printer User Manual

1. Introducció

Welcome to your new ciciglow FDM Mini 3D Printer. This manual provides essential information for setting up, operating, and maintaining your printer. Designed for beginners and children, this compact 3D printer supports 1.75mm PLA and TPU filaments, offering a print size of 100x100x100mm.

2. Informació de seguretat

Please read all safety instructions carefully before operating the printer to ensure safe use and prevent damage.

• Always ensure the power adapter meets the specified voltage and current (12V, 2A).
• The nozzle reaches high temperatures (180-230°C). Avoid touching the nozzle during operation or immediately after.
• Mantingueu les mans allunyades de les peces mòbils durant el funcionament.
• Feu funcionar la impressora en una zona ben ventilada.
• Do not attempt to modify the printer.
• Desconnecteu l'alimentació abans de realitzar qualsevol manteniment o ajust.

3. Contingut del paquet

Carefully unpack your ciciglow FDM Mini 3D Printer and verify all components are present.

• 3D Printer (main unit)
• Axes and Platform
• Control Box and Print Head
• Portafilaments
• Z-axis bracket
• Filament (s)ample)
• Swirl (tool)
• Manuals (2)
• Adaptador

Figure 3.1: This image displays the individual components included in the package: the main printer parts, filament, tools, and power adapter.

4. Producte acabatview i Components

Familiarize yourself with the main parts of your 3D printer.

Figure 4.1: This diagram illustrates the key components of the 3D printer and their positions.

• 1. Control Box Base: The main unit housing the electronics.
• 2. Y Axis & Platform: The print bed that moves along the Y-axis.
• 3. Z-axis Bracket: Supports the Z-axis.
• 4. Z Axis: Controls vertical movement of the print head.
• 5. X Axis: Controls horizontal movement of the print head.
• 6. Print Head: Contains the nozzle for extruding filament.
• 7. Filament Holder: Sosté la bobina de filament.

5. Muntatge i muntatge

Your printer comes partially assembled. Follow these steps to complete the setup.

5.1. Passos de muntatge

1. Assemble the Base and Platform: Connect the Y axis & Platform to the Control box base.
2. Attach Z-axis Bracket: Secure the Z-axis bracket.
3. Install Z and X Axes: Mount the Z axis and X axis components.
4. Attach Print Head: Connect the print head to the X axis.
5. Instal·leu el portafilaments: Attach the filament holder to the top of the Z axis.
6. Connectar l'alimentació: Ensure the power adapter is connected to the printer and a suitable power source (12V, 2A).

Figure 5.1: Refer to this diagram for the correct installation sequence of the printer components.

5.2. Anivellament de la base d'impressió

Proper bed leveling is crucial for successful prints and to prevent damage to the printer.

1. Press the home switch to initiate the leveling process.
2. When the print head touches the magnetic plate, immediately disconnect the power.
3. Adjust the print bed as needed. If the nozzle is too close, it can crush and damage the magnetic plate. If it's too far, the printed model will not adhere to the magnetic plate.

6. Funcionament

6.1. Preparing Print Files

The printer supports STL and OBJ input formats, which are converted to Gcode for printing. You can use slicing software like Easyware, Cura, or Simplify3D to prepare your models.

Figure 6.1: This image illustrates different software options for 3D printing: modeling software for creating designs, slicing software for preparing models for printing, and online repositories for pre-made printable models.

6.2. Filament de càrrega

This printer supports 1.75mm PLA and TPU filaments.

1. Col·loqueu el carrete de filament al portafilaments. Nota: Only 250g filament can be hung directly. For larger spools, an extension part may be needed (a Gcode file for this part is typically found on the included TF card).
2. Gently feed the filament into the print head's input.
3. Use the '+' and '-' controls on the printer to load the material until it extrudes smoothly from the nozzle.

6.3. Inici d'una impressió

1. Upload your Gcode files to a memory card (maximum 128GB).
2. Insert the memory card into the printer.
3. Use the printer's controls to select your desired file.
4. Press the start button. The nozzle will heat up to approximately 180°C in 5 minutes for PLA material.
5. Monitor the initial layers to ensure proper adhesion and print quality.

Figure 6.2: The printer is shown in operation, producing a green frog model. The image highlights the maximum print dimensions of 100x100x100mm (3.94x3.94x3.94 inches).

Figure 6.3: This image displays the printer with a completed orange dog model, demonstrating the quality of prints achievable.

Figure 6.4: Three small, colorful rocket models are shown on the print bed, illustrating the printer's capability for multiple small prints.

7. Manteniment

Un manteniment regular garanteix un rendiment òptim i una llarga vida útil de la impressora 3D.

• Netegeu la base d'impressió: Regularly clean the magnetic print plate to ensure good adhesion. Use isopropyl alcohol for best results.
• Neteja de broquets: If the nozzle becomes clogged, gently clean it with a fine needle or by performing a cold pull procedure.
• Lubricació: Periodically lubricate the Z-axis lead screw and other moving parts with appropriate lubricant.
• Actualitzacions de firmware: Comproveu el del fabricant weblloc web per a qualsevol actualització de firmware disponible.
• Emmagatzematge: When not in use, store the printer in a dry, dust-free environment.

8. Solució De Problemes

Aquesta secció aborda problemes comuns que podeu trobar i ofereix possibles solucions.

• Model Not Sticking to Print Bed:
  • Ensure the print bed is properly leveled. (Refer to Section 5.2).
  • Clean the print bed thoroughly.
  • Increase the initial layer temperature or use an adhesive (e.g., glue stick) if necessary.
• Filament sense extrusió:
  • Comproveu si el broquet està obstruït.
  • Ensure the filament is loaded correctly and not tangled.
  • Verify the nozzle temperature is appropriate for the filament type.
• Poor Print Quality (Layer Shifts, Gaps):
  • Check for loose belts or components.
  • Ensure the printer is on a stable surface.
  • Verify slicing software settings (e.g., layer height, print speed).

9. Especificacions

Technical details of the ciciglow FDM Mini 3D Printer.

Figure 9.1: This image provides a visual representation of the printer's physical dimensions, measuring 155mm in width, 175mm in depth, and 210mm in height.

10. Atenció al client

For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your purchase or visit the official ciciglow weblloc.