Voyager AST01241LU-BLU-STK-1

Voyager Bluey 2 3-Wheel Kick Scooter Instruction Manual

Model: AST01241LU-BLU-STK-1

Introducció

Thank you for choosing the Voyager Bluey 2 3-Wheel Kick Scooter. This manual provides essential information for the safe assembly, operation, and maintenance of your scooter. Please read it thoroughly before use and retain it for future reference.

Voyager Bluey 2 3-Wheel Kick Scooter

Image: The Voyager Bluey 2 3-Wheel Kick Scooter, showcasing el seu disseny general.

Informació de seguretat

ADVERTIMENT: Always wear a helmet and protective gear (knee and elbow pads) when riding this scooter. Adult supervision is required at all times. This scooter is designed for children aged 3 to 7 years and supports a maximum weight of 75 pounds (34 kg).

  • Do not ride on uneven surfaces, near traffic, or in wet conditions.
  • Assegureu-vos que tots els clamps and fasteners are securely tightened before each use.
  • Check the brake for proper function before riding.
  • Mantingueu els dits i la roba allunyats de les peces mòbils.

Què hi ha a la caixa

El vostre paquet ha de contenir els components següents:

  • Scooter (main deck with wheels)
  • Handlebar T-bar

Muntatge i muntatge

Assembly is quick and straightforward. Follow these steps:

  1. Desempaquetar components: Traieu amb cura totes les peces de l'embalatge.
  2. Insert Handlebar: Locate the handlebar T-bar. Firmly insert the T-bar into the opening on the front of the scooter deck until it clicks into place. Ensure it is fully seated and secure.
  3. Ajustar l'alçada del manillar: The handlebar height is adjustable to accommodate growing children. Loosen the quick-release clamp on the stem, adjust the handlebar to the desired height, and then securely tighten the clamp. Ensure the handlebar is at a comfortable height for the rider, typically between the waist and chest.
Adjustable Handlebars on Bluey 2 Scooter

Image: Illustration showing the adjustable handlebars of the scooter.

Bluey 2 Scooter Features Diagram

Image: Diagram highlighting key features including soft rubber handlebars, 3-wheeled design, foot-activated brake, and light-up wheels.

Instruccions de funcionament

This scooter features a self-balancing 3-wheel design and lean-to-steer technology for intuitive control.

  1. Inici: Place one foot on the extra-wide non-slip deck. Use the other foot to push off the ground to gain momentum.
  2. Steering (Lean-to-Steer): To turn, lean your body in the desired direction. The scooter will respond by turning the front wheels. This method helps develop balance and coordination.
  3. Frenatge: To slow down or stop, gently press your foot down on the rear foot brake located above the back wheel. Apply pressure gradually for a smooth stop.
  4. Light-Up LED Wheels and Deck: The multicolor RGB LED lights in the wheels and deck activate automatically with movement. No batteries are required for this feature.
Tilt-to-Turn Steering on Bluey 2 Scooter

Image: Illustration demonstrating the tilt-to-turn steering mechanism.

Close-up of Light-Up Wheels on Bluey 2 Scooter

Imatge: Primer pla view of the light-up LED wheels in action.

Child riding Bluey 2 Scooter outdoors

Image: A child riding the Bluey 2 scooter on a paved surface.

Manteniment

  • Neteja: Netegeu el patinet amb anuncisamp tela. Eviteu utilitzar productes químics aggressivs o netejadors abrasius.
  • Comprovacions periòdiques: Periodically inspect all screws, bolts, and clamps to ensure they are tight. Check the wheels for wear and tear, and ensure they spin freely. Verify the brake is functioning correctly.
  • Emmagatzematge: Store the scooter in a dry place away from direct sunlight and extreme temperatures to prolong its lifespan.

Resolució de problemes

ProblemaCausa possibleSolució
Handlebar is looseAlliberament ràpid clamp no estrènyer.Ensure the handlebar is fully inserted and the quick-release clamp està ben ajustat.
Wheels not lighting upInsufficient movement or worn-out internal generator.The lights activate with movement; ensure the scooter is in motion. If still not working, contact customer support.
El fre no és eficaçDebris under the brake or worn brake pad.Clear any debris from the brake area. If the issue persists, contact customer support.

Especificacions

CaracterísticaDetall
MarcaVoyager
Nom del modelScooter for Kids (Bluey 2)
Número de modelAST01241LU-BLU-STK-1
Franja d'edatNen (es recomana de 3 a 7 anys)
Límit de pes75 lliures (34 kg)
Nombre de rodes3
Material de la rodaPoliuretà
Material del marcAlumini
Tipus de manillarAjustable
Estil de freFrenada posterior
Característiques especialsSelf-Balancing, Light-Up LED Wheels, Lean-to-Steer Control, Wide Anti-Slip Deck
UPC021331052452

Garantia i Suport

This Voyager scooter comes with a Limited Manufacturer's Warranty. For details regarding warranty coverage, please refer to the documentation included with your purchase or contact Voyager customer support.

Devolucions: Products purchased from Amazon are eligible for return within 30 days of receipt, subject to Amazon's return policy.

For technical assistance, parts, or warranty claims, please contact Voyager Customer Support:

© 2026 Voyager. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.