DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. Informació de seguretat

WARNING: Always read and understand all safety warnings and instructions before operating this tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Utilitzeu sempre ulleres de seguretat o ulleres de seguretat amb protectors laterals i, si cal, una pantalla facial completa quan utilitzeu aquest producte.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. Producte acabatview

Contingut del paquet

• Clavadora Brad sense fil
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• Bateria Li-ion de 2.0 Ah
• Carregador ràpid d'1 hora
• Maleta de transport
• Manual d'instruccions

Components de l'eina

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

Dimensions i pes

Figure 2: Physical dimensions and weight of the nailer (without battery).

• Longitud: 10.83 polzades (27.5 cm)
• Amplada: 9.45 polzades (24 cm)
• Weight: 6.19 lbs (without battery)

3. Configuració

Instal·lació de la bateria

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. Alineeu la bateria amb la ranura de la bateria de l'eina.
3. Feu lliscar la bateria a la ranura fins que sentiu un clic i encaixi fermament al seu lloc.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. Premeu el botó d'alliberament i traieu la coberta de la revista.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. Tanqueu la coberta de la revista fins que encaixi amb el botó d'alliberament.

Ungles Viewer la finestra

L'ungla viewer window allows you to quickly check the fastener level. When the window shows vermell, it indicates the magazine is without nails. When it shows negre, it indicates the magazine contains nails.

4. Instruccions de funcionament

Modes de tir

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Figure 4: Firing mode selection switch.

Mode de tret únic

• Shift the mode switch to the costat esquerre (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

Mode d'activació de contacte

• Shift the mode switch to the costat dret (contact firing icon).
• Premeu el gallet.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

Nota: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

Ajust de profunditat

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

Il·luminació LED

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

Indicador LED

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• Vermell activat: Bateria baixa.
• Vermell intermitent: Nails/staples are jammed.
• Verd encès: No nails/staples in the magazine.
• Parpelleig verd: Sobreescalfament.
• Llum apagada: Estat normal de funcionament.

Vídeo oficial del producte

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. Manteniment

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

Cura de la bateria

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• Emmagatzemeu la bateria en un lloc fresc i sec, lluny de la llum solar directa i de temperatures extremes.

6. Solució De Problemes

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. Especificacions

Fixacions compatibles

Figure 9: Compatible nail and staple types.

8. Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH website. Ensure you have your model number (024009) and purchase details available when contacting support.