Introducció
Thank you for choosing the Tilswall W106S Cordless Hot Glue Gun. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and keep it for future reference.
Instruccions importants de seguretat
- Always use the glue gun in a well-ventilated area.
- The nozzle and melted glue are hot. Avoid direct contact with skin to prevent burns.
- Do not place the glue gun sideways when hot. Use the integrated stand to keep the hot nozzle elevated.
- Do not insert foreign objects into the glue inlet.
- Only remove a remaining glue stick once it has cooled and partially melted.
- Children under 8 years old must be supervised by an adult when using this device.
- To protect the battery, use a 5V/2A charging adapter (maximum 10W). Fast chargers are not recommended.
- Assegureu-vos que el dispositiu estigui apagat mentre es carrega.
Image: Safety tips for using the glue gun, illustrating proper handling and care.
Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- 1 x Tilswall W106S Cordless Hot Glue Gun
- 20 x Premium Hot Melt Glue Sticks (0.275" x 5.51")
- 1 x cable de càrrega USB-C
- Manual d'usuari
Configuració
1. Càrrega inicial
Before first use, fully charge the glue gun. Connect the provided USB-C cable to the charging port on the bottom of the handle and to a 5V/2A charging adapter (not included). The indicator light will show the charging status.
Image: The glue gun connected to a USB-C charger, showing the charging port and indicator light.
2. Inserting Glue Sticks
Insert a glue stick into the round opening at the back of the glue gun. Push it gently until it stops. Do not force it.
Image: Proper insertion of a glue stick into the glue gun.
Instruccions de funcionament
1. Power On and Preheating
Press the power button to turn on the glue gun. The indicator light will turn blue, signifying that the device is heating up. The glue gun preheats in approximately 90 seconds (may take 30-60 seconds longer in colder environments). Once heated, the light will turn solid blue, indicating it is ready for use.
Image: The glue gun with its blue heating indicator light.
2. Applying Glue
Once the glue gun is ready, gently press the trigger to dispense melted glue. Apply glue to the desired surface. The constant temperature of 170°C ± 10°C ensures strong bonds.
Imatge: Examples of the glue gun in use for various craft and repair tasks.
3. Cordless Operation and Charging During Use
The cordless design allows for flexible use. The built-in 2000mAh battery provides 40-60 minutes of continuous use on a single charge. The device can also be used while charging, but it is recommended to turn off the device and charge it for ten minutes before using it if it was completely drained.
Image: The glue gun in cordless operation.
4. Apagueu
Press the power button again to turn off the glue gun when finished. The indicator light will turn off.
5. Smart Light Alerts
The indicator light provides status updates:
- Llum blava: Heating (flashing) / Ready for use (solid)
- Llum vermella: Carregant
- Llum verda: Càrrega completa
Image: Explanation of the smart light alerts for heating, charging, and full charge.
Manteniment
1. Neteja del broquet
After use, allow the nozzle to cool completely. Gently wipe any excess glue from the nozzle with a dry cloth. Do not use abrasive cleaners or sharp objects to clean the nozzle.
2. Emmagatzematge
Store the glue gun in a dry, cool place, away from direct sunlight and out of reach of children. Ensure no glue sticks are partially melted in the chamber during storage to prevent blockages.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La pistola d'enganxar no s'escalfa. | La bateria està baixa o esgotada. | Charge the glue gun fully using a 5V/2A adapter. |
| La cola no es dispensa. | Glue stick not fully inserted or device not heated. | Ensure a glue stick is properly inserted and wait for the blue indicator light to become solid. |
| Charging light does not turn green. | Using an incompatible charger or charging while device is on. | Use a 5V/2A charging adapter. Ensure the glue gun is powered off during charging. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | W106S |
| Color | Blau |
| Font d'alimentació | Battery Powered (2000mAh Lithium-ion) |
| Temps de preescalfament | Aprox. 90 segons |
| Temperatura de funcionament | 170°C ± 10°C |
| Temps d'execució | 40-60 minuts per càrrega |
| Port de càrrega | USB-C |
| Carregador recomanat | 5 V/2 A (10 W màxim) |
| Mida de barra de cola compatible | 0.275" x 5.51" (7 mm x 140 mm) |
| Dimensions del producte | 4.8 cm de llargada x 5.3 cm d'amplada x 2.12 cm d'alçada |
| Tipus de material | Plàstic |
| Materials compatibles | Fabric, Foam, Metal, Plastic, Wood, Paper, Cardboard, Cork, Glass, Ceramics |
Vídeos de productes
DIY Seashell Ball with Tilswall W106S
Video demonstrating the use of the Tilswall W106S glue gun to create a seashell ball craft project.
DIY Table Lamp Project with Tilswall W106S
Projecció de vídeoasing the Tilswall W106S glue gun in action for a DIY table lamp projecte.
Floral Bucket Craft with Tilswall W106S
Video demonstrating a floral bucket craft using the Tilswall W106S hot glue gun.
Garantia i Suport
Tilswall products come with a 12-month warranty. Should you have any questions or require assistance, please contact our professional customer support team. Refer to the product packaging or the official Tilswall weblloc per obtenir informació de contacte.
