Ortis 7-Day Programmable In-Wall Timer Switch

1. Informació important de seguretat

ADVERTIMENT: Risk of electric shock. Improper installation can lead to serious injury or death. Always turn off power at the circuit breaker before installing or servicing this device. Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.

• Aquest dispositiu requereix un Fil neutre for operation. Verify the presence of a neutral wire (typically white) in your electrical box before installation.
• Do not exceed the maximum load rating of 1800W or 3/4 HP at 120V.
• Assegureu-vos que totes les connexions dels cables estiguin segures i correctament aïllades.
• Només per a ús interior.

2. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Ortis 7-Day Programmable In-Wall Timer Switch (Model KJ-077)
• Filferro
• Cargols de muntatge
• Manual d'usuari

3. Especificacions

4. Instal·lació

Abans de començar: Turn off power at the circuit breaker for the switch location. Confirm power is off using a voltage provador.

Esquema de cablejat

Image: Wiring diagram for the Ortis timer switch. The diagram illustrates connecting the BLACK wire to the LINE, the BLUE wire to the LOAD, and the WHITE wire to the NEUTRAL. Wire nuts are used for secure connections.

Instal·lació pas a pas:

1. Apagueu l'alimentació: Locate the circuit breaker controlling the switch you are replacing and turn it OFF.
2. Treure l'interruptor antic: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
3. Identificar els cables: Identify the Line (incoming power), Load (to light/appliance), and Neutral wires in your electrical box. A neutral wire (usually white) is required for this timer switch. If you do not have a neutral wire, this switch is not compatible.
4. Connecteu els cables: Using the provided wire nuts, connect the wires from the Ortis timer switch to your household wiring as follows:
   • Connecteu el NEGRE wire from the timer to the LÍNIA (hot) wire from your electrical box.
   • Connecteu el BLAU wire from the timer to the CÀRREGA wire (to the light/appliance).
   • Connecteu el BLANC wire from the timer to the NEUTRE wire from your electrical box.
5. Interruptor de muntatge: Carefully fold the wires into the electrical box and secure the timer switch with the provided mounting screws.
6. Instal·leu la placa de paret: Attach your standard wall plate (not included) over the timer switch.
7. Restaura l'alimentació: Torneu a encendre l'alimentació a l'interruptor.

5. Controls sobreview

Imatge: Detallada view of the Ortis timer switch interface. The blue backlit LCD screen displays time, day, and program status. Buttons for increasing/decrementasing values, changing modes, and manual on/off control are clearly indicated. An LED illuminates when the load is active.

The Ortis timer switch features an intuitive three-button interface and a blue backlit LCD screen for easy operation and visibility in low light conditions.

• Pantalla LCD: Displays current time, day, operating mode, load state, and program information.
• Increase Key: Used to adjust time, program values, or navigate menus upwards.
• Decrease Key: Used to adjust time, program values, or navigate menus downwards.
• Clau de mode: Cycles through different operating modes and settings menus.
• Tecla d'encesa/apagada: Manually turns the connected load ON or OFF, or confirms selections.
• Indicador LED: Illuminates when the connected load (e.g., light, fan) is ON.

6. Configuració inicial

After installation and restoring power, the device will require initial setup.

Setting Current Time and Date:

1. Premeu el botó Mode key until the time setting appears.
2. Utilitza el Augmentar i Disminuir keys to set the current hour, then press On/Off per confirmar.
3. Repetiu-ho durant els minuts i el dia de la setmana.

Setting Latitude and Longitude (for Sunrise/Sunset):

This feature allows the timer to automatically adjust ON/OFF times based on local sunrise and sunset.

1. Premeu el botó Mode key until the latitude/longitude setting appears.
2. Utilitza el Augmentar i Disminuir keys to input your local latitude and longitude values. A chart of major cities may be provided in the full manual for reference, or you can look up your specific coordinates online.
3. Premeu On/Off to confirm. The display will show the calculated sunrise/sunset times for verification.

Ajust de l'horari d'estiu (DST):

The timer can be configured to automatically adjust for Daylight Saving Time. Refer to the full manual for specific steps to enable or disable this feature.

7. Modes de funcionament

The Ortis timer switch offers three primary operating modes:

7.1 Automatic Mode (Sunrise/Sunset & Fixed Schedules)

Image: Illustration of the timer switch's automatic control, showing lights turning off at sunrise and on at sunset. The blue backlit LCD screen is visible, indicating clear readability in the dark.

In Automatic Mode, the timer operates based on programmed schedules, including sunrise/sunset times or custom ON/OFF times.

• Sunrise/Sunset Control: Once latitude and longitude are set, the timer automatically calculates and adjusts ON/OFF times daily based on local sunrise and sunset. An offset can be applied to turn lights on/off before or after these times.
• Fixed Schedules: Up to 7 custom ON/OFF programs can be set for specific times and days of the week.

7.2 Mode aleatori

Image: A visual representation of the timer's random mode, designed to enhance home security by simulating occupancy. Lights turn on and off at varied times, creating a 'lived-in' appearance.

Random Mode varies the ON/OFF times of your lights or appliances slightly to simulate occupancy, enhancing home security when you are away.

• Per activar el mode aleatori, premeu la tecla Mode key until "Random" is displayed.
• The timer will then randomly adjust your programmed ON/OFF times within a certain window.

7.3 Mode manual

Manual Mode allows you to override any programmed schedules and turn the connected load ON or OFF instantly.

• Premeu el botó On/Off key to toggle the connected load between ON and OFF.
• The timer will remain in the manually set state until the next programmed event or until Manual Mode is exited.

8. Horaris de programació

The Ortis timer switch allows you to set up to 7 distinct ON/OFF programs. Programs can be set for specific days, weekdays, weekends, or all 7 days.

Steps to Program a Schedule:

1. Premeu el botó Mode key repeatedly until "P01" (Program 1) appears on the screen.
2. Utilitza el Augmentar i Disminuir keys to select the desired ON time (hour and minute), then press On/Off per confirmar.
3. Next, select the days of the week for this ON event. You can choose individual days, groups (e.g., Mon-Fri, Sat-Sun), or all 7 days. Press On/Off per confirmar.
4. Repeat the process to set the corresponding OFF time and days for Program 1.
5. To set additional programs (P02-P07), press the Mode key to advance to the next program number and repeat steps 2-4.
6. Un cop configurats tots els programes, premeu el botó Mode key until the current time display returns, indicating the timer is ready to operate.

Nota: All settings are saved permanently and will resume operation even after a power outage due to the internal battery backup.

9. Àmplia compatibilitat

Image: A collage demonstrating the wide range of devices compatible with the Ortis timer switch. Examples include LED, CFL, incandescent, and halogen lights, as well as ceiling fans, fountain pumps, pool pumps, and sprinklers.

The Ortis timer switch is compatible with various lighting types and appliances:

• LED, CFL, Incandescent, Halogen, and Fluorescent Lights
• Ventiladors de sostre
• Ventiladors d'escapament de bany
• Bombes de font
• Bombes de piscina
• Aspersors

10. Manteniment

The Ortis timer switch requires minimal maintenance.

• Neteja: Netegeu la superfície amb un suau, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Sense peces reparables per l'usuari: Do not attempt to open or repair the device. Refer to qualified personnel for any issues beyond basic troubleshooting.

11. Solució De Problemes

12. Garantia i Suport

The Ortis 7-Day Programmable In-Wall Timer Switch (Model KJ-077) comes with a Garantia del fabricant de 2 anys.

For technical support, warranty claims, or further assistance, please refer to the contact information provided with your purchase or visit the official Ortis weblloc.