1. Introducció
Thank you for choosing the Elitech MOT-270W Digital Wood and Material Moisture Meter. This device is designed for precise and reliable measurement of moisture content in various materials, including wood, paper, bamboo, and construction materials. Its high accuracy of ±2% helps prevent issues like warping, cracking, or mold caused by incorrect moisture levels. This manual provides essential information for the safe and effective use of your moisture meter.
Image: The Elitech MOT-270W Moisture Meter in use, measuring the moisture content of a tree trunk. The display shows a reading of 65.8%. Operating temperature range is 0°C to 40°C, and operating humidity range is 20%RH to 90%RH.
2. Informació de seguretat
Please read all safety instructions before using the device. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- Sharp Probes: The measurement probes are sharp. Handle the device with care to avoid injury. Keep the protective cap on when not in use.
- Seguretat de la bateria: Ensure correct battery polarity when installing. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period. Dispose of batteries according to local regulations.
- Condicions ambientals: Do not expose the device to extreme temperatures, high humidity, or direct sunlight. Avoid using the device in environments with flammable gases or vapors.
- Neteja: Feu servir un drap suau i sec per netejar el dispositiu. No utilitzeu productes de neteja abrasius ni dissolvents.
3. Producte acabatview
The Elitech MOT-270W is a compact and lightweight digital moisture meter featuring a clear LCD display and intuitive controls.
3.1 Components
- Measurement Probes: Two sharp, 9.8 mm pins for penetrating materials.
- Pantalla LCD: Shows moisture readings, material mode, battery indicator, and other functions.
- ON/OFF/HOLD Button: Powers the device on/off and activates the data hold function.
- Botó SET: Selects the material type (wood grades 1-4, construction materials A-D).
- M Button (Max/Min): Displays maximum and minimum recorded moisture values.
- Tapa protectora: Covers the probes when not in use.
- Compartiment de la bateria: Located at the rear, requires 2 AAA batteries.
Imatge: Frontal view of the Elitech MOT-270W Digital Moisture Meter, highlighting its ergonomic design, clear LCD screen, and control buttons. The sharp measurement probes are visible at the top.
Image: The Elitech MOT-270W Moisture Meter showing the 'HOLD MAX' function activated, with a reading of 65.8% on the display. The device is positioned against a cross-section of wood, illustrating the data retention feature.
4. Configuració
4.1 Instal·lació de la bateria
- Localitzeu la tapa del compartiment de la bateria a la part posterior del dispositiu.
- Use a small screwdriver to open the battery compartment.
- Introduïu dues piles AAA, assegurant-vos de la polaritat correcta (+/-) tal com s'indica a l'interior del compartiment.
- Substituïu la tapa del compartiment de la bateria i fixeu-la amb el cargol.
The device comes with two AAA batteries for immediate use.
4.2 Initial Power-On and Automatic Calibration
Upon first power-on, the device performs an automatic calibration. Ensure the probes are not touching any material during this process. This ensures reliable and consistent measurements.
5. Instruccions de funcionament
5.1 Engegada/apagada
- Per encendre, premeu el botó ON/OFF/HOLD botó.
- Per apagar-lo, manteniu premut el botó ON/OFF/HOLD button for approximately 3 seconds. The device also features an automatic shut-off after 10 minutes of inactivity to conserve battery life.
5.2 Selecció de materials
The MOT-270W offers 8 measurement ranges, including 4 for different wood types and 4 for various construction materials. Press the SET button to cycle through the material modes (Grade 1, 2, 3, 4 for wood; A, B, C, D for construction materials). Refer to the table below to select the appropriate mode for your material.
Image: A detailed table illustrating the 8 measurement ranges (Grades 1-4 for wood, A-D for construction materials) and their corresponding material types for the Elitech MOT-270W. This helps users select the correct setting for accurate readings.
| Interval | Tipus de material | Measurement Range (%) |
|---|---|---|
| Grau 1 | Rhodesian Teak, Black Locust, Brazilian Walnut | del 6.0% al 39% |
| Grau 2 | Walnut, Clone, Poplar, Teak | del 7.0% al 48% |
| Grau 3 | Fir, Douglas Fir, Meranti, Ash, White Spruce, Maple, White Ash, Balsa, Sandalwood, Elm, Catalpa Fargesii, Keteleeria | del 8.5% al 55% |
| Grau 4 | Scots Pine, Chilean Pine, White Pine, Larch, White Fir (Abies alba), Birch, Linden | del 9.5% al 65% |
| Gamma A | Hard Plaster Leveling | del 0% al 10.9% |
| Gamma B | Morter de ciment | del 0% al 8.9% |
| Gamma C | Lime Mortar / Plaster Mortar | del 0% al 9.9% |
| Range D | Maó | del 0% al 15.9% |
Nota: If you are unsure about the material being tested, it is recommended to use Grade 3 for wood or consult a material specific guide.
5.3 Prendre una mesura
- Remove the protective cap from the probes.
- Select the appropriate material mode using the SET botó.
- Carefully push the measurement probes into the material to be tested. Ensure both probes penetrate the surface to a sufficient depth (approximately 5mm) for an accurate reading.
- El percentatge d'humitattage es mostrarà a la pantalla LCD.
- After measurement, gently pull the probes out of the material and replace the protective cap.
5.4 Funció de retenció de dades
Per congelar la lectura actual a la pantalla, premeu la tecla ON/OFF/HOLD button briefly during measurement. The "HOLD" icon will appear on the screen. Press the button again to release the hold and resume live measurement.
5.5 Maximum/Minimum Value Display
After taking several measurements, you can view the highest and lowest recorded values:
- Premeu el botó M button once to display the maximum moisture value recorded (MAX icon will appear).
- Premeu el botó M button again to display the minimum moisture value recorded (MIN icon will appear).
- Premeu el botó M button a third time to return to live measurement mode.
Image: The Elitech MOT-270W Moisture Meter displaying the maximum and minimum humidity analysis. The screen shows 'HOLD MAX' and a reading of 65.8%, with explanatory text for maximum and minimum value modes.
6. Manteniment
- Neteja: Wipe the device body with a soft, dry cloth. Ensure the probes are clean and free of debris after each use. Do not immerse the device in water or use liquid cleaners.
- Substitució de la bateria: Quan aparegui l'indicador de bateria baixa a la pantalla, substituïu les piles immediatament per garantir lectures precises. Seguiu els passos d'instal·lació de la bateria a la Secció 4.1.
- Emmagatzematge: Store the device in a cool, dry place with the protective cap on the probes. If storing for an extended period, remove the batteries to prevent leakage.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén. | Piles gastades o instal·lades incorrectament. | Comproveu la polaritat de la bateria. Canvieu les bateries si cal. |
| Lectures inexactes o inconsistents. | Incorrect material mode selected. Probes not fully inserted. Probes dirty or damaged. | Ensure correct material mode (refer to Section 5.2). Push probes deeper into the material. Clean probes. If probes are damaged, contact support. |
| La pantalla està en blanc o tènue. | Bateria baixa. | Substituïu les piles. |
| "HOLD" icon is stuck on. | Data hold function is active. | Premeu el botó ON/OFF/HOLD button again to release. |
8. Especificacions
- Model: MOT-270W (EU-MOT-270W-1)
- Principi de mesura: Resistència elèctrica
- Intervals de mesura: 8 modes (4 wood, 4 construction materials)
- Wood Moisture Range: 6.0% to 65% (depending on wood grade)
- Construction Material Moisture Range: 0% to 15.9% (depending on material type)
- Precisió: ±2%
- Resolució: 0.1%
- Longitud de la sonda: 9.8 mm
- Temperatura de funcionament: De 0 °C a 40 °C (32 °F a 104 °F)
- Humitat de funcionament: 20% de HR a 90% de HR
- Font d'alimentació: 2 x AAA 1.5V Alkaline Batteries (included)
- Apagat automàtic: Després de 10 minuts d'inactivitat
- Dimensions: Aproximadament 20.1 x 13.5 x 3.6 cm
- Pes: Approximately 108 grams (excluding batteries)
9. Garantia i Suport
Elitech provides a warranty for this product against defects in materials and workmanship under normal use. Please refer to the warranty card included with your product for specific terms and conditions.
For technical support, troubleshooting assistance, or to obtain a digital version of this manual in French, please contact Elitech customer service via email. We aim to respond within 24 hours.
Informació de contacte: Please refer to the contact details provided on the product packaging or Elitech's official weblloc.
