1. Instruccions de seguretat importants
Read all instructions before using this device. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Mantenir la zona de treball neta i ben il·luminada. Les zones desordenades o fosques conviden a accidents.
- No feu funcionar el dispositiu en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
- Mantingueu els nens i els espectadors allunyats mentre feu servir el dispositiu. Les distraccions poden fer que perdis el control.
- Avoid accidental starting. Ensure the switch is in the off-position before connecting to a power source, picking up, or carrying the device.
- Do not over-inflate. Follow recommended pressure levels for tires and other inflatables.
- Do not leave the device unattended while operating.
- Store idle devices out of the reach of children and do not allow persons unfamiliar with the device or these instructions to operate the device.
- Utilitzeu només accessoris especificats pel fabricant.
- Do not expose the device to rain or wet conditions. Water entering the device will increase the risk of electric shock.
- No feu servir el dispositiu si s'ha caigut o s'ha fet malbé.
2. Producte acabatview
2.1 Descripció del dispositiu
The Fanttik S100 APEX is a portable, rechargeable tire inflator designed for quick and precise inflation of various items, including car tires, motorcycle tires, bicycle tires, and sports balls. It features a digital display, multiple inflation modes, and a built-in flashlight.
2.2 Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- Fanttik S100 APEX Tire Inflator
- Cable de càrrega USB
- Tub d'aire
- Needle Valve Adaptor
- Adaptador de vàlvula Schrader-Presta
- Manual d'usuari (aquest document)
- Bossa d'emmagatzematge
2.3 Característiques clau
- Super-Fast Inflation: Inflates a 26.3-inch medium-sized car tire (28-33 PSI) in approximately 56 seconds.
- Alta precisió: Achieves inflation with an accuracy of ±1 PSI.
- Bateria de llarga durada: Provides up to 40 minutes of continuous operation on a full charge.
- Operació amb un sol clic: Intuitive design for ease of use.
- Versàtil: Supports multiple inflation modes (Car, Motorcycle, Bike, Ball, Manual).
- Multi-Unit Display: Displays pressure in PSI, BAR, and KPA.
- Disseny portàtil: Allows for flexible use from any angle.
Image: The Fanttik S100 APEX display highlighting its one-click preset modes for Car, Motorcycle, Bike, Ball, and Manual, along with the supported pressure units: PSI, BAR, and KPA.
3. Introducció (Configuració)
3.1 Càrrega del dispositiu
- Connect the provided USB charging cable to the charging port on the Fanttik S100 APEX.
- Connect the other end of the USB cable to a compatible USB power adapter (not included) or a USB port on a computer.
- The battery indicator on the display will show the charging status. Charge the device fully before first use.
3.2 Connectar la mànega d'aire
- Screw one end of the air tube securely into the air outlet port on the top of the inflator.
- Select the appropriate valve adaptor (Schrader, Presta, or Needle) for the item you wish to inflate.
- Attach the selected adaptor to the free end of the air tube.
4. Funcionament
4.1 Engegada/apagada
- Per engegar, premeu i manteniu premut el botó d'engegada (O) for a few seconds until the display illuminates.
- To power off, press and hold the power button (O) again. The device will also automatically power off after a period of inactivity.
4.2 Selecció del mode d'inflat
The S100 APEX offers five preset inflation modes:
- With the device powered on, press the mode button (M) to cycle through the available modes: Car, Motorcycle, Bike, Ball, and Manual.
- Select the mode appropriate for your item. Each mode has a default pressure setting that can be adjusted.
Image: A person using the Fanttik S100 APEX to inflate a car tire, demonstrating the device's portability and ease of use for vehicle maintenance.
Image: The Fanttik S100 APEX connected to and inflating a bicycle tire, illustrating its suitability for various types of tires.
Image: The Fanttik S100 APEX inflating a basketball, showcasing its versatility for sports equipment.
4.3 Establiment de la pressió objectiu
- After selecting a mode, the current pressure will be displayed.
- Use the '+' and '-' buttons to adjust the target pressure. The display will show the target pressure blinking.
- Premeu el botó de la unitat (U) to switch between PSI, BAR, and KPA pressure units.
Imatge: Un primer pla view of the Fanttik S100 APEX's digital display, showing both the current tire pressure and the user-set target pressure during inflation.
4.4 Inici i aturada de la inflació
- Un cop definida la pressió objectiu, premeu el botó d'engegada (O) per iniciar la inflació.
- The device will automatically stop when the target pressure is reached.
- To manually stop inflation at any time, press the power button (O) de nou.
- Disconnect the air tube from the valve after inflation is complete.
4.5 Ús de la llanterna
- To turn on the flashlight, press the flashlight button (usually indicated by a light bulb icon).
- Press the flashlight button again to cycle through different light modes (e.g., steady, SOS, flashing) or to turn it off.
Image: A person utilizing the built-in flashlight of the Fanttik S100 APEX to illuminate a car tire in low-light conditions, highlighting its utility for nighttime use.
5. Manteniment i emmagatzematge
5.1 Neteja
- Netegeu l'exterior del dispositiu amb un damp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
- Assegureu-vos que el dispositiu estigui completament sec abans de guardar-lo o recarregar-lo.
5.2 Cura de la bateria
- To prolong battery life, charge the device at least once every three months, even if not in use.
- Avoid storing the device in extreme temperatures.
5.3 Emmagatzematge
- Store the Fanttik S100 APEX in its provided storage bag in a cool, dry place, away from direct sunlight and moisture.
- Keep all accessories organized with the main unit.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s’encén. | Bateria baixa. | Carregueu el dispositiu completament. |
| Device not inflating. | Air tube not securely connected; valve not properly attached; target pressure not set. | Ensure all connections are tight. Check valve attachment. Set a target pressure and press the start button. |
| Lectura de pressió inexacta. | Poor connection to valve; device malfunction. | Ensure the valve connection is secure and airtight. If the problem persists, contact customer support. |
| El dispositiu s'escalfa massa. | Funcionament continu durant massa temps. | Allow the device to cool down for at least 10-15 minutes before resuming operation. |
7. Especificacions
| Especificació | Detall |
|---|---|
| Marca | Fanttik |
| Número de model | S100 APEX |
| Voltage | 11.1 volts (CC) |
| Nivell de soroll | 80 decibels |
| Pes de l'article | 1.8 lliures |
| Capacitat | 32 litres |
| UPC | 850077828362 |
8. Garantia i atenció al client
8.1 Garantia del fabricant
The Fanttik S100 APEX comes with a 1-Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims.
8.2 Atenció al client
For technical assistance, warranty inquiries, or replacement parts, please contact Fanttik customer support. Refer to the official Fanttik weblloc web o la documentació de la compra per obtenir informació de contacte.