Micsig MHO14-100 Tablet Oscilloscope with Multimeter User Manual

1. Introducció

This manual provides detailed instructions for the safe and effective operation of your Micsig MHO14-100 Tablet Oscilloscope with Multimeter. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage. Keep this manual for future reference.

2. Què hi ha a la caixa

Carefully unpack the contents and verify that all items listed below are present and in good condition. If any items are missing or damaged, please contact your vendor.

• Micsig MHO1 Oscilloscope x1
• Passive probes x4
• Multimeter pen x1 pair
• Adaptador d'alimentació x1
• Cable d'alimentació x1
• Quick Guide Collection x1

3. Característiques clau

• Built-in Multimeter: Features a 4½-digit multimeter for voltage, current, resistance, capacitance, diode, and continuity tests. This eliminates the need for a separate device and allows simultaneous oscilloscope and multimeter operation.
• Ultra-Portable & Slim Design: With a slim 3.1cm design, the MHO14-100 is designed for portability, fitting easily into backpacks for field diagnostics, lab analysis, or remote projects.
• Lab-Grade Accuracy: Equipped with a 12-bit ADC, 100MHz bandwidth, 4 analog channels, 1GSa/s real-time sampling, and 110Mpts memory depth for capturing subtle signal details.
• Pantalla tàctil HD d'8 polzades: An anti-glare 1280×800 display offers sharp visuals and responsive touch control. Users can switch between touch, button, or hybrid control modes.
• Max Protection & Power: Integrated 16000mAh lithium-ion battery provides extended runtime and supports over 1000 charge cycles. Power bank charging is supported for true field portability. A shock-absorbing rubber casing offers impact resistance and a non-slip grip.
• Remote Control & Storage: Supports control via SCPI commands, mobile apps (Android/iOS), and PC software. Includes HDMI output for large-screen analysis and segmented storage for efficient capture of multiple trigger events.

4. Configuració

1. Desembalatge: Traieu amb cura l'oscil·loscopi i tots els accessoris de l'embalatge. Inspeccioneu-ho per si hi ha algun dany visible.
2. Càrrega de la bateria: Connect the provided power adapter to the oscilloscope's DC 12V input port and plug it into a power outlet. The device features a 16000mAh lithium-ion battery. Allow sufficient time for the battery to fully charge before initial use.
3. Encès/apagat: Press and hold the power button located on the side or front panel to turn the device on or off.
4. Ajust del suport: The device includes a foldable hidden stand for stable support and easy viewing. Adjust it to your preferred angle.

5. Instruccions de funcionament

5.1 Basic Oscilloscope Operation

1. Connexió de sondes: Connect the passive probes to the desired analog input channels (CH1-CH4) on the front panel. Ensure a secure connection.
2. Encès: Turn on the oscilloscope. The 8-inch HD touchscreen will display the main interface.
3. Senyal d'entrada: Apply the signal you wish to measure to the connected probe.
4. Configuració automàtica: For quick initial setup, press the 'Auto Set' button. The oscilloscope will automatically adjust vertical, horizontal, and trigger settings to display a stable waveform.
5. Ajustaments manuals: Use the dedicated knobs and touchscreen controls for fine-tuning.
   • Controls verticals: Ajusta el voltage scale (V/div) and position for each channel.
   • Controls horitzontals: Adjust time base (s/div) and horizontal position.
   • Controls de disparador: Set trigger level, mode (Edge, Pulse Width, Video, etc.), and source to stabilize the waveform.
6. Mides: Access the measurement menu to perform automatic measurements (e.g., Vpp, Vrms, Frequency, Period) or use cursors for manual measurements.

5.2 Multimeter Functionality

The MHO14-100 integrates a 4½-digit multimeter. To use the multimeter:

1. Canvi de modes: Select the multimeter function from the main menu or a dedicated button (if available).
2. Connecting Multimeter Pens: Connect the multimeter pens to the dedicated input jacks (COM, VΩmA, 10A) on the front panel, corresponding to the measurement type.
3. Select Measurement Type: Choose the desired measurement (Voltage, Current, Resistance, Capacitance, Diode, Continuity) on the screen.
4. Realitzeu la mesura: Apply the multimeter pens to the circuit or component under test. The measurement will be displayed on the screen.

5.3 Funcions avançades

• Comandament a distància: The oscilloscope supports remote control via SCPI commands, mobile applications (Android/iOS), and PC software. Connect the device to a network via the LAN port or USB for remote access.
• Sortida HDMI: Use the HDMI port to connect the oscilloscope to an external display for larger viewing i anàlisi.
• Emmagatzematge de dades: The device offers 110Mpts memory depth and segmented storage, allowing you to capture and analyze complex waveforms and multiple trigger events efficiently. Save waveforms, screenshots, and setup configurations to internal memory or a connected USB drive.

6. Manteniment

• Neteja: Feu servir un drap suau i sec per netejar el dispositiu. Per a la brutícia resistent, netegeu lleugerament.amp cloth with mild detergent can be used. Avoid abrasive cleaners or solvents.
• Cura de la bateria: To prolong battery life, avoid fully discharging the battery frequently. Store the device in a cool, dry place if not used for extended periods, and charge it periodically.
• Actualitzacions de programari: Comproveu el del fabricant weblloc web per a les actualitzacions de firmware disponibles per garantir un rendiment òptim i l'accés a noves funcions.
• Calibració de la sonda: Periodically check and calibrate your oscilloscope probes according to standard procedures to maintain measurement accuracy.

7. Solució De Problemes

• El dispositiu no s'encén: Ensure the battery is charged or the power adapter is securely connected and receiving power.
• Sense visualització de forma d'ona: Check probe connections, input signal presence, and trigger settings. Try using the 'Auto Set' function.
• Forma d'ona inestable: Adjust the trigger level and trigger mode. Ensure the trigger source is correctly selected.
• Mesures inexactes: Verify probe compensation and calibration. Ensure correct measurement settings are selected for the multimeter.
• Pantalla tàctil que no respon: Reinicieu el dispositiu. Si el problema persisteix, contacteu amb l'assistència.

8. Especificacions

9. Garantia i Suport

The Micsig MHO14-100 Tablet Oscilloscope is manufactured by XEAST. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official XEAST weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.