Phanteks XT View Matrix Mid-Tower Gaming Case Instruction Manual

1. Introducció

The Phanteks XT View Matrix is a high-performance mid-tower gaming case designed for enthusiasts. It features an immersive 600 LED Matrix screen, dual tempered glass panels, and optimized airflow for superior cooling. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case.

Image 1.1: The Phanteks XT View Matrix Mid-Tower Gaming Case, showcasing its white exterior and vibrant RGB fans visible through the tempered glass panels.

2. Informació de seguretat

Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in injury or damage to the product.

• Always disconnect the power supply from the wall outlet before performing any installation or maintenance.
• Avoid exposing the case to moisture or extreme temperatures.
• Manipuleu els panells de vidre temperat amb cura per evitar que es trenquin.
• Keep small components and tools away from children.
• Assegureu-vos una correcta connexió a terra per evitar riscos elèctrics.

3. Guia d'instal·lació

This section outlines the steps for installing your PC components into the Phanteks XT View Matrix case.

3.1. Preparació del cas

Remove the side panels by unscrewing the thumbscrews at the rear of the case and gently sliding the panels off. For tempered glass panels, exercise caution.

Imatge 3.1: Interna view of the case, highlighting various mounting points for components such as fans, storage drives, and cable management routes.

3.2. Instal·lació de la placa base

1. Instal·leu la protecció d'E/S a l'obertura posterior de la carcassa.
2. Align your motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's screw holes.
3. Fixeu la placa base amb els cargols proporcionats.

3.3. Instal·lació de la font d'alimentació (PSU)

1. Localitzeu la zona de muntatge de la font d'alimentació a la part inferior posterior de la carcassa.
2. Slide the PSU into its designated bay.
3. Fixeu la font d'alimentació amb els cargols de la part posterior de la carcassa.

Image 3.2: Rear internal view of the case, illustrating the power supply unit (PSU) mounting area and various drive bays.

3.4. Instal·lació de la unitat d'emmagatzematge

The case supports multiple 2.5" SSDs and 3.5" HDDs. Refer to the case's internal layout for specific mounting locations.

• SSD de 2.5 polzades: Mount SSDs to the dedicated 2.5" brackets, typically located behind the motherboard tray.
• Discs durs de 3.5 polzades: Install HDDs into the drive cages, usually found beneath the PSU shroud.

3.5. Expansion Card (GPU) Installation

1. Traieu les cobertes de les ranures d'expansió necessàries de la part posterior de la carcassa.
2. Inseriu la targeta gràfica o altres targetes d'expansió a les ranures PCIe corresponents de la placa base.
3. Fixeu la targeta amb cargols.

Imatge 3.3: Un intern view of the case with a graphics card, CPU cooler, and fans already installed, demonstrating component compatibility and layout.

3.6. Instal·lació del ventilador i del radiador

The XT View Matrix supports up to 9 x 120mm fan positions and full 360mm radiator support at the top. The case includes 3 M25-120 D-RGB fans.

• Mount additional fans or radiators to the designated areas using the provided screws.
• Connect fan and RGB cables to your motherboard or a compatible controller.

3.7. Gestió de cables

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

4. Instruccions de funcionament

4.1. Encès

After all components are installed and cables are connected, press the power button located on the front I/O panel to start your system.

4.2. Ports d'E/S frontals

El panell d'E/S frontal proporciona un accés convenient a:

• 1x USB-C 3.2 Gen2 port
• 1x port USB 3.0
• Botons d'encesa i restabliment
• Lighting control buttons (no software needed for basic control)
• Mic/Headphone jacks

4.3. 600 LED Matrix Display Control

The integrated 600 LED Matrix screen can display dynamic system statistics, animations, and custom visuals. To fully customize the display, download and install the Phanteks Nexlinq app.

Image 4.1: The 600 LED Matrix screen displaying dynamic content, with an overlay of the Phanteks Nexlinq app interface for customization.

Image 4.2: Various examples of information and patterns that can be displayed on the 600 LED Matrix screen, including system stats and custom graphics.

5. Manteniment

Un manteniment regular ajuda a garantir un rendiment òptim i una llarga vida útil dels components del teu PC.

5.1. Neteja

• Filtres de pols: Periodically remove and clean the dust filters (if applicable) to maintain good airflow.
• Interior: Use compressed air to remove dust from inside the case, especially from fans and heatsinks.
• Exterior: Netegeu les superfícies exteriors amb un damp tela. Eviteu els netejadors abrasius.

5.2. Manteniment del ventilador

Ensure fans are free from obstructions and spinning correctly. If a fan becomes noisy or stops working, consider replacing it.

6. Solució De Problemes

Si teniu problemes amb la configuració del vostre PC, tingueu en compte els passos habituals següents per resoldre problemes:

• Sense energia: Check all power connections, including the PSU to wall outlet, PSU to motherboard, and front panel power switch cable.
• Els ventiladors no giren/No hi ha RGB: Verify fan and RGB cables are correctly connected to the motherboard or controller. Check software settings for RGB control.
• LED Matrix Display Issues: Ensure the display cable is securely connected. If using the Nexlinq app, check for software updates or reinstall the application.
• Sobreescalfament: Ensure all fans are installed correctly and spinning. Check for dust buildup and clean filters. Verify proper thermal paste application on CPU.

7. Especificacions

8. Garantia i Suport

For warranty information and technical support, please refer to the official Phanteks weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.

Phanteks Official Weblloc: www.phanteks.com