Introducció
The HPBS 5000A Jump Starter with Air Compressor (Model A1) is a multi-functional portable device designed for automotive emergencies and general utility. It combines a powerful jump starter capable of restarting 12V vehicles with up to 10.0L gasoline and 8.0L diesel engines, a 150 PSI tire inflator, a power bank for charging electronic devices, and an LED flashlight with SOS and strobe functions. This manual provides essential information for safe and effective use.
Figure 1: HPBS 5000A Jump Starter with Air Compressor (Model A1)
Informació de seguretat
Always adhere to the following safety guidelines to prevent injury or damage to the device and vehicle:
- Do not use the air pump function continuously for more than 10 minutes. Allow a 10-minute rest period after each 10 minutes of continuous use to prevent overheating.
- Charge the jump starter fully upon first receipt.
- It is recommended to start the car when the jump starter's power level is above 75%.
- Recharge the jump pack every 2-3 months to extend battery life, even if not in use.
- Avoid using the jump starter on cars with an engine displacement exceeding the specified limits (10.0L gasoline, 8.0L diesel).
- Wait 30 seconds between jump-start attempts to prevent overheating.
- The device features 10 built-in protections (reverse connection, overcurrent, overvoltage, overload, overcharge/discharge, etc.) to ensure safe operation. Indicator lights and beeping sounds from the smart jumper clamps will alert you to incorrect connections or errors.
- Mantenir fora de l'abast dels nens.
- No desmunteu la unitat.
Figure 2: Built-in Smart BMS Safety System protections.
Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- 1 x HPBS 5000A Jump Starter with Air Compressor
- 1 x cable de pont intel·ligent
- 1 x cable de càrrega USB tipus C
- 1 x Caixa d'emmagatzematge
- 1 x Tub de bomba
- 4 x broquets d'aire
- 1 x Manual d'usuari (aquest document)
Figure 3: All items included in the HPBS 5000A Jump Starter package.
Configuració i càrrega
Before initial use, fully charge the HPBS 5000A Jump Starter. This ensures optimal performance and extends battery life.
- Connect the provided USB Type-C charging cable to the charging port on the jump starter.
- Connecteu l'altre extrem del cable USB a un adaptador de corrent USB adequat (no inclòs) o a un port USB alimentat.
- The digital display will indicate the charging status. Charge until the battery indicator shows full.
Nota: For best results and to maintain battery health, recharge the unit every 2-3 months, even when not in active use.
Figure 4: Charging the HPBS 5000A Jump Starter.
Instruccions de funcionament
1. Arrencada d'un vehicle amb ajuda d'un cable
Ensure the jump starter is at least 75% charged before attempting to jump-start a vehicle.
- Connect Smart Jumper Cable: Insert the smart jumper cable into the jump starter's port. Ensure a secure connection.
- Connectar a la bateria del cotxe: Enganxeu el cl vermell (+).amp to the positive terminal of the car battery. Attach the black (-) clamp al terminal negatiu de la bateria del cotxe.
- Verifica la connexió: The LED indicator on the smart jumper cable should turn green, indicating a correct and safe connection. If it shows red or beeps, check the connections for polarity or other errors.
- Inici del vehicle: Once the indicator is green, start your car's engine.
- Eliminar Clamps: After the car starts, immediately remove the jumper clamps from the car battery, then disconnect the smart jumper cable from the jump starter.
Figure 5: Correct connection and steps for jump starting a vehicle.
Video 1: Official demonstration of the HPBS Jump Starter with Air Compressor in use for jump starting.
2. Using the Tire Inflator (Air Compressor)
The 150 PSI air compressor can inflate tires for cars, motorcycles, bikes, and other inflatables using the included nozzles.
- Connectar la mànega d'aire: Screw the pump tube securely onto the air outlet port of the jump starter.
- Col·loca el broquet: Select the appropriate air nozzle for your item (car tire, bike valve, ball needle) and attach it to the pump tube.
- Connecta a l'element: Connect the nozzle to the tire valve or inflatable item.
- Engegar i seleccionar el mode: Turn on the jump starter. Short press the 'M' button to cycle through inflation modes (Car, Motorcycle, Bicycle, Ball). The display will show the current pressure and target pressure.
- Establir la pressió objectiu: Use the '+' and '-' buttons to set your desired target pressure. The unit supports PSI, KPA, BAR, and KG/CM².
- Inici de la inflació: Long press the 'OK' button to begin inflation. The compressor will automatically stop once the target pressure is reached.
- Desconnectar: Disconnect the nozzle and pump tube.
Important: Allow the compressor to cool for at least 10 minutes after 10 minutes of continuous use to prevent damage from overheating.
Figure 6: Using the portable tire inflator function with detailed steps.
Video 2: Short demonstration of the HPBS Jump Starter's air compressor inflating a tire.
3. Ús com a bateria externa
The jump starter can charge USB-powered devices like smartphones and tablets.
- Connecteu el cable de càrrega USB del dispositiu al port de sortida USB de l'arrencador de bateria.
- L'arrencador començarà a carregar el dispositiu automàticament.
Figure 7: Using the jump starter as a portable power bank.
4. Ús de la llanterna LED
La llanterna LED integrada ofereix múltiples modes per a diverses situacions.
- Activar/Desactivar: Press and hold the flashlight button to turn the light on or off.
- Canvi de modes: Short press the flashlight button to cycle through modes: Normal, SOS, and Strobe.
Figure 8: The 400-lumen LED flashlight with SOS and Strobe functions.
Manteniment
Proper maintenance ensures the longevity and reliability of your HPBS 5000A Jump Starter.
- Càrrega regular: Recharge the unit every 2-3 months to maintain battery health, even if it has not been used.
- Emmagatzematge: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. The operating temperature range is -4°F to 140°F (-20°C to 60°C).
- Neteja: Netegeu el dispositiu amb un drap suau i sec. No utilitzeu productes químics agressius ni netejadors abrasius.
- Air Compressor Cooling: Always allow the air compressor to cool down for at least 10 minutes after 10 minutes of continuous operation.
Figure 9: The jump starter is designed to operate in various environmental conditions.
Resolució de problemes
Si teniu problemes, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s’encén. | La bateria està esgotada. | Carregueu el dispositiu completament amb el cable USB tipus C. |
| Car does not start after jump-start attempt. | cl. incorrectaamp connection; jump starter battery too low; vehicle battery severely damaged. | Assegureu-vos que clamps are connected correctly (red to +, black to -) and the smart cable indicator is green. Ensure jump starter is above 75% charge. If issues persist, consult a mechanic. Wait 30 seconds between attempts. |
| Air compressor does not inflate or stops prematurely. | Hose not securely connected; target pressure reached; overheating; low device battery. | Check all hose and nozzle connections. Verify target pressure setting. Allow device to cool if used continuously for over 10 minutes. Charge the device if battery is low. |
| Smart jumper cable indicator shows red or beeps. | Reverse polarity connection; short circuit; overcurrent. | Desconnecteu immediatament el clamps and re-connect them correctly (red to positive, black to negative). If the issue persists, there might be a fault with the vehicle battery or the smart cable. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | HPBS |
| Número de model | A1 |
| Cim Ampedat | 5000 Amps |
| Compatibilitat del motor | Fins a 10.0 l de gasolina, 8.0 l de dièsel |
| Voltage | 12 Volts |
| Composició de les cèl·lules de la bateria | Polímer de liti |
| Capacitat de la bateria | 59.2 Amp Hores |
| Pressió del compressor d'aire | 150 PSI |
| Taxa de flux d'aire | 30 l/min |
| Dimensions del producte (P x A x A) | 5.5" x 8.46" x 4.7" |
| Pes de l'article | 1.6 lliures |
| Temperatura de funcionament | -4 °F a 140 °F (-20 °C a 60 °C) |
| Certificacions de seguretat | UL, FCC, IEC standards compliant |
Garantia i Suport
Your HPBS 5000A Jump Starter comes with a comprehensive warranty and dedicated customer support.
- Garantia: Enjoy peace of mind with a 24-month warranty covering manufacturing defects and quality-related issues.
- Atenció al client: 24/7 customer support is available for any questions or assistance you may need. Please refer to the contact information provided in your package or on the official HPBS weblloc.