ACEBEAM E10 2.0 Longest-Range Pocket EDC Flashlight User Manual

1. Introducció

Thank you for choosing the ACEBEAM E10 2.0 Longest-Range Pocket EDC Flashlight. This manual provides essential information for the safe and efficient use of your device. Please read it thoroughly before operation and retain it for future reference.

Què hi ha a la caixa

• E10 2.0 Flashlight (Battery Included) x 1
• Cordó x 1
• 2 junta tòrica
• Cable USB x 1
• Manual d'usuari x 1

2. Característiques del producte

• Longest-Range Pocket EDC Flashlight: Compact design (3.47in long, 3.76oz) with a custom TIR optic and CREE XP-LR LED, delivering up to 1,200 lumens and a beam distance of 715 meters.
• Base magnètica: The magnetic tail cap allows secure attachment to metal surfaces for hands-free operation.
• Recarregable: Features a USB-C rechargeable 16340 battery (included).
• Resistent i resistent: Constructed from aerospace-grade AL6061-T6 aluminum with a hard-anodized finish. Rated IP68 for waterproof performance and 1.5-meter impact resistance.
• Fàcil de transportar: Designed for everyday carry, fitting easily into pockets.
• Intuitive Side Switch: Provides smooth, one-handed control for mode changes.

Imatge: Més deview of the ACEBEAM E10 2.0 flashlight highlighting its key features.

3. Configuració

Instal·lació de la bateria

1. Desenrosqueu la tapa de la cua de la llanterna.
2. Insert the included 16340 rechargeable battery with the positive (+) end facing towards the head of the flashlight.
3. Screw the tail cap back on securely. Ensure the O-ring is properly seated to maintain waterproof integrity.

Note: The E10 2.0 is compatible with CR123A batteries, but the included 16340 battery offers USB-C charging capability.

Carregant la bateria

The included 16340 battery features a built-in USB-C charging port. To charge:

1. Unscrew the tail cap and remove the 16340 battery from the flashlight.
2. Locate the USB-C port on the side of the battery.
3. Connect the provided USB-C cable to the battery and a suitable USB power source (e.g., phone charger, laptop).
4. The indicator light on the battery will show charging status (typically red for charging, green for fully charged).
5. Once fully charged, disconnect the cable and reinsert the battery into the flashlight, ensuring the tail cap is tightened.

Image: The ACEBEAM E10 2.0 flashlight demonstrating its convenient USB-C charging capability.

4. Instruccions de funcionament

The ACEBEAM E10 2.0 features an intuitive side switch for easy operation.

Funcionament bàsic

• Activar/Desactivar: Single press the side switch to turn the flashlight on or off.
• Change Brightness Levels: When the flashlight is on, press and hold the side switch to cycle through Ultra-Low, Low, Medium, and High modes. Release the switch to select the desired brightness.

Modes especials

• Mode turbo: Double-press the side switch quickly to activate Turbo mode (1200 lumens). Double-press again to return to the previously used mode.
• Mode estroboscòpic: Triple-press the side switch quickly to activate Strobe mode. Triple-press again to return to the previously used mode.

Funció de bloqueig

To prevent accidental activation, the flashlight has a lockout function:

• Activa el bloqueig: When the flashlight is off, press and hold the side switch for approximately 3 seconds until the light flashes briefly, indicating it is locked.
• Desactiva el bloqueig: Press and hold the side switch for approximately 3 seconds until the light turns on in Ultra-Low mode, indicating it is unlocked.

Image: Illustration of the intuitive side switch and available lighting modes.

5. Manteniment

Neteja

• Netegeu el cos de la llanterna amb un drap net i suau.
• Clean the lens with a lens cloth to maintain optimal light output.

Cura de la bateria

• Charge the battery regularly, especially if the flashlight will not be used for an extended period.
• Guardeu la bateria en un lloc fresc i sec.

Anells tòrics

• Periodically inspect the O-rings for wear or damage.
• Replace damaged O-rings with the provided spares to maintain the IP68 waterproof rating.
• Apply a thin layer of silicone grease to the O-rings to ensure a good seal and prevent drying.

6. Solució De Problemes

• La llanterna no s'encén:
      - Ensure the battery is correctly installed with the positive (+) end facing the head.
      - Check if the battery is charged. Remove and charge the battery using the USB-C port.
      - Verify the flashlight is not in lockout mode. Press and hold the side switch for 3 seconds to unlock.
• La llum és tènue o parpelleja:
      - The battery level may be low. Recharge the battery.
      - Ensure the tail cap is fully tightened. A loose connection can cause intermittent power.
• Water ingress after exposure:
      - Check the O-rings for any damage or improper seating. Replace if necessary and ensure they are lubricated.
• Flashlight gets hot during use:
      - High brightness modes (especially Turbo) generate significant heat. This is normal. The flashlight has built-in thermal regulation to prevent overheating by automatically reducing output.

If you experience issues not covered here, please contact ACEBEAM customer support.

7. Especificacions

Image: Detailed technical specifications table for the E10 2.0 flashlight.

8. Garantia i Suport

Informació de la garantia

The ACEBEAM E10 2.0 flashlight comes with a Garantia del fabricant de 10 anys, garantint fiabilitat i tranquil·litat a llarg termini.

Atenció al client

For any questions, technical assistance, or warranty claims, please contact ACEBEAM customer support or visit the official ACEBEAM store online.

Official ACEBEAM Store: Visita la botiga