plplaaoo WT87B Bluetooth Digital Anemometer Instruction Manual

1. Introducció

The plplaaoo WT87B Bluetooth Digital Anemometer is a high-precision handheld device designed for measuring wind speed and temperature. It features an LCD backlight display for clear readings in various lighting conditions, Bluetooth and USB connectivity for data transmission, and a durable ABS plastic construction suitable for outdoor use. This manual provides detailed instructions for the proper setup, operation, and maintenance of your anemometer.

2. Informació de seguretat

• Llegiu atentament totes les instruccions abans d'utilitzar el dispositiu.
• Do not attempt to disassemble or modify the anemometer, as this may void the warranty and cause damage.
• Mantingueu el dispositiu allunyat de temperatures extremes, llum solar directa i líquids corrosius.
• Assegureu-vos que la bateria estigui inserida correctament segons les marques de polaritat.
• Eliminar les bateries usades de manera responsable d'acord amb la normativa local.

3. Contingut del paquet

Si us plau, comproveu el paquet per veure si hi ha els elements següents:

• plplaaoo WT87B Digital Anemometer
• Bossa de tela
• Corda penjant
• Cable USB
• Manual d'instruccions (aquest document)

Note: A 9V battery (6F22 type) is required but not included in the package.

4. Producte acabatview

The WT87B anemometer is designed for ease of use and accurate measurements. Below are key components and features:

Figura 4.1: Davant view of the anemometer, highlighting the wind impeller and LCD display.

Figura 4.2: De dalt a baix view of the anemometer, illustrating the button layout for various functions.

Característiques principals:

• High-precision wind speed measurement (0-30m/s)
• Real-time, average, maximum, and minimum wind speed readings
• LCD backlight display for readability
• Bluetooth and USB connectivity for data transmission
• Unit switching (m/s, km/h, ft/min, knots, mph)
• Funció de retenció de dades
• Funció de llum LED

5. Configuració

5.1 Instal·lació de la bateria

1. Locate the rear power cover on the back of the anemometer.
2. Disassemble the rear power cover by sliding or unscrewing it.
3. Insert one 9V (6F22 type) battery into the battery compartment, ensuring correct polarity.
4. Close the power cover tightly.

Figura 5.1: Illustration of the anemometer, including a visual guide for battery installation and button functions.

6. Instruccions de funcionament

6.1 Power On/Off and Backlight

• To power on the device, press the red power button (LED button). The display will show the current ambient wind speed and temperature.
• To turn on the LCD backlight, press the power button again briefly.
• To power off, press and hold the red power button.

6.2 Wind Speed Measurement Modes

• Mesura en temps real: The device displays the current wind speed by default after power-on.
• Maximum/Minimum/Average Measurement: Premeu el botó UP/MIN/MAX button to cycle through maximum, minimum, and current wind speed display modes.
• Average Wind Speed: Premeu el botó VEL/AVG button to measure and display the average wind speed.

6.3 Canvi d'unitats

To switch between wind speed units (m/s, km/h, ft/min, knots, mph), press the UNIT/DOWN botó.

6.4 Data Hold and Settings

• Premeu el botó SET/HOLD key to enter the setting menu or to activate the data saving mode (data hold).
• When data hold is active, the displayed reading will be frozen. Press again to release.

6.5 Funció de la llum LED

Premeu el botó LIGHT/ENTER key to turn on the integrated LED light or to confirm a function within the settings menu.

6.6 Bluetooth & USB Connectivity

The anemometer supports seamless connection to a mobile phone via Bluetooth or to a computer via USB. This allows for stable and reliable data transmission. Utilize the companion app (if available for your mobile device) to monitor and analyze wind speed data with enhanced functionality.

7. Manteniment

• Neteja: Feu servir un drap suau i sec per netejar el dispositiu. No utilitzeu productes de neteja abrasius ni dissolvents.
• Emmagatzematge: When not in use for extended periods, remove the battery to prevent leakage. Store the anemometer in a cool, dry place, away from direct sunlight and extreme temperatures.
• Impeller Care: Ensure the wind impeller is free from dust, debris, or obstructions for accurate readings.

8. Solució De Problemes

• El dispositiu no s'encén: Comproveu si la bateria de 9 V està instal·lada correctament i té prou càrrega. Substituïu la bateria si cal.
• Lectures inexactes: Ensure the impeller is spinning freely and is not obstructed. Verify that the device is held in an open area, away from obstacles that could affect airflow.
• Bluetooth/USB connection issues: Ensure Bluetooth is enabled on your mobile device or that the USB cable is securely connected to your computer. Restart the anemometer and your connecting device if issues persist.
• La pantalla és tènue o parpelleja: The battery may be low. Replace the 9V battery.

9. Especificacions

10. Informació de la garantia

Specific warranty details for the plplaaoo WT87B Digital Anemometer are not provided in the product information. Please refer to the retailer's return policy or contact the manufacturer directly for warranty terms and conditions.

11. Suport

For technical assistance, troubleshooting, or further inquiries regarding your plplaaoo WT87B Digital Anemometer, please contact the seller or manufacturer through their official support channels. Refer to your purchase documentation for contact information.