DATOUBOSS 12v300Ah

DATOUBOSS LiFePO4 Battery 12V 300Ah User Manual

Model: 12v300Ah | Brand: DATOUBOSS

1. Producte acabatview

The DATOUBOSS 12V 300Ah LiFePO4 Battery is a deep-cycle lithium iron phosphate battery designed for reliable energy storage. It is suitable for various applications including solar power systems, recreational vehicles (RVs), camping setups, and off-grid power solutions. This battery offers a stable power output, high energy efficiency, and a long cycle life, making it an effective alternative to traditional lead-acid batteries.

Característiques principals:

  • Alta capacitat: 12V 300Ah with 3840Wh usable energy, providing substantial power for extended use.
  • Cicle de vida llarg: Ofereix més de 6000 cicles al 80% de profunditat de descàrrega (DOD), cosa que garanteix una vida útil de fins a 10 anys.
  • BMS integrat: Features a 200A Battery Management System (BMS) for protection against overcharge, over-discharge, overcurrent, short circuit, and temperature fluctuations.
  • Disseny lleuger: Weighs approximately 27.7 kg (60.9 lbs), significantly lighter than comparable lead-acid batteries, facilitating easier installation and transport.
  • Sistema escalable: Supports configurations up to 4P4S (4 parallel, 4 series) for increased capacity and voltage requisits.
  • Construcció duradora: Built with automotive-grade LiFePO4 cells and features an IP65 rated sealed housing for protection against dust and water ingress.
DATOUBOSS 12V 300Ah LiFePO4 Battery with dimensions and key specifications
Figure 1: DATOUBOSS 12V 300Ah LiFePO4 Battery showing dimensions (50cm x 22cm x 25cm) and key specifications like 3840Wh usable energy, 300A max continuous discharge, 3840W max load power, and IP65 waterproof/dustproof rating. M8 terminal bolts are also shown.
Interna view of DATOUBOSS LiFePO4 battery highlighting BMS protections
Figure 2: Internal structure of the LiFePO4 battery, illustrating the Grade A cells and BMS protection features including cell balancing, overcharge, over-discharged, short-circuit, over-current, and high/low temperature protection.

2. Informació de seguretat

Read and understand all safety instructions before installing or operating the battery. Failure to follow these instructions may result in electric shock, fire, or other serious injury or damage.

  • Eviteu curtcircuits: Do not short-circuit the positive and negative terminals. This can cause severe damage to the battery and pose a fire hazard.
  • No Modification or Disassembly: Do not modify or disassemble the battery without authorization. Unauthorized modifications can compromise safety and void the warranty.
  • Fire and Water: Do not expose the battery to fire or water. The battery is IP65 rated for dust and splash resistance, but not for submersion.
  • Càrrega: Always use a standard charger that matches the output voltage and chemistry of the lithium battery. Using an incompatible charger can damage the battery or lead to unsafe conditions.
  • Aplicació: This battery is designed for deep-cycle energy storage applications. It is no pensat for engine starting or cranking applications.
  • Ventilació: Ensure adequate ventilation around the battery during operation and charging to prevent heat buildup.
  • Temperatura: Operate and store the battery within the specified temperature ranges (Charge Temp: 0°C ~ 45°C, Discharge Temp: -20°C ~ 65°C).

3. Què hi ha a la caixa

En obrir el paquet, comproveu que tots els components hi són i que no estan danyats.

  • 1x DATOUBOSS 12.8V 300Ah Deep-Cycle Lithium Iron Phosphate Battery (Core Series)
  • 1x Manual d'usuari (aquest document)
  • 2x Insulating Sleeves
  • 2x M8 Long Terminal Bolts
Contents of the DATOUBOSS 12V 300Ah LiFePO4 Battery package
Figure 3: Package contents including the 12.8V 300Ah battery, user manual, insulating sleeves, and M8 terminal bolts.

Video 1: Unboxing and initial inspection of the DATOUBOSS 12V 300Ah LiFePO4 Battery, demonstrating its physical characteristics and included accessories.

4. Configuració i instal·lació

Proper installation is crucial for the safe and efficient operation of your LiFePO4 battery. Always ensure all connections are secure and correctly polarized.

4.1 Connecting Multiple Batteries (4P4S Configuration)

The DATOUBOSS 12V 300Ah battery supports scalable configurations up to 4 parallel and 4 series (4P4S) to meet higher capacity or voltage requirements. This allows for a maximum system capacity of 61.44 kWh.

  • Connexió paral·lel: Connect positive terminals to positive terminals and negative terminals to negative terminals to increase overall capacity (Ah) while maintaining the same voltage (V).
  • Connexió de sèrie: Connect the positive terminal of one battery to the negative terminal of the next battery to increase overall voltage (V) while maintaining the same capacity (Ah).
  • Combined (Series-Parallel): For 4P4S, first connect batteries in parallel to achieve desired capacity, then connect these parallel strings in series to achieve desired voltage.
  • Important: Ensure all batteries in a series or parallel bank are of the same type, capacity, and voltage. Use appropriate cables and fuses for all connections.
Diagram illustrating 4P4S battery connection for increased power
Figura 4: Example diagram of a 4P4S battery configuration, showing how multiple batteries can be connected to achieve higher voltage and capacity, up to 61.44 kWh.

4.2 System Integration (Solar/RV)

The battery can be integrated into various energy systems. A typical setup for solar or RV applications involves a solar panel, an MPPT charge controller, the battery, and an inverter to power AC loads.

Diagram of a convenient energy storage solution for RVs with solar panel, MPPT, battery, and inverter
Figure 5: A typical RV energy storage system diagram, showing the connection flow from solar panel to MPPT controller, then to the battery, and finally through an inverter to various loads.
Diagram of a household solar energy storage system
Figure 6: Illustration of a household solar energy system, demonstrating how solar panels charge the lithium battery pack via an MPPT controller, and an inverter converts DC power to AC for household electricity consumption.

5. Instruccions de funcionament

The DATOUBOSS LiFePO4 battery is designed for ease of use in various deep-cycle applications.

5.1 Càrrega de la bateria

The battery can be charged using several methods:

  • Lithium Battery Charger: Use a dedicated LiFePO4 battery charger with compatible voltage i la configuració actual.
  • Panell solar: Connect to a solar panel system via an MPPT (Maximum Power Point Tracking) charge controller.
  • Generador: Use a generator with an appropriate charging system or AC output connected to a compatible charger.
Three ways to charge the DATOUBOSS LiFePO4 battery
Figure 7: Visual representation of three common charging methods: a dedicated lithium battery charger, solar panels, and a generator.

5.2 Aplicacions típiques

This battery is versatile and can power a wide range of devices and systems:

  • RV i Camping: Power appliances like air conditioners, coffee makers, refrigerators, and fans during travel or outdoor activities.
  • Emmagatzematge d'energia solar: Store excess solar energy for use during nighttime or cloudy days, enhancing energy independence.
  • Home Emergency Backup: Provide backup power for essential household items during power outages.
  • Marine (Boat/Trolling Motor): Suitable for powering trolling motors and other marine electronics.
  • Sistemes de seguretat: Can be used as a reliable power source for security cameras and other surveillance equipment.
DATOUBOSS LiFePO4 battery powering various appliances in an RV setting
Figure 8: An RV setup demonstrating the battery's capability to power an air conditioner (1000W for 3.8H), coffee maker (800W for 4.8H), refrigerator (150W for 25.6H), and fan (100W for 38.4H).
Various applications of the DATOUBOSS LiFePO4 battery
Figura 9: Examples of wide applications including RVs, solar energy storage for homes, home emergency backup, boats, and camping.

6. Manteniment

LiFePO4 batteries require minimal maintenance compared to lead-acid batteries, but following these guidelines will ensure optimal performance and longevity:

  • Inspecció periòdica: Periodically check the battery terminals for corrosion or loose connections. Clean terminals with a wire brush if necessary and ensure they are tightened securely.
  • Mantenir net i sec: While the battery has an IP65 rating, it is best to keep it clean and dry. Avoid exposing it to excessive moisture or dust.
  • Gestió de la temperatura: Operate and store the battery within the recommended temperature ranges. Extreme temperatures can affect performance and lifespan. The integrated BMS provides protection against high and low temperatures.
  • Pràctiques de càrrega: Avoid consistently deep discharging the battery to 0% state of charge. While LiFePO4 batteries tolerate deep cycles well, maintaining a higher average state of charge can extend overall life.
  • Emmagatzematge: If storing the battery for an extended period, ensure it is charged to approximately 50-70% of its capacity and stored in a cool, dry place.

7. Solució De Problemes

The integrated Battery Management System (BMS) provides comprehensive protection. If you encounter issues, consider the following common scenarios:

Problemes comuns i solucions:

  • La bateria no es carrega:
    • Check all connections to the charger and battery terminals for looseness or corrosion.
    • Ensure the charger is compatible with LiFePO4 batteries and is functioning correctly.
    • Verify that the input power source to the charger is active.
    • The BMS may have activated over-discharge protection. Try connecting to a compatible charger to reset.
  • Sense potència de sortida:
    • Comproveu el volum de la bateriatage. If it's too low, the BMS may have activated over-discharge protection.
    • Inspect all load connections and ensure they are secure.
    • The BMS may have activated overcurrent or short-circuit protection. Disconnect the load, wait a few minutes, and reconnect. Reduce the load if it was excessive.
    • Check for any blown fuses in your system.
  • Sobreescalfament de la bateria:
    • The BMS includes temperature protection. If the battery becomes excessively hot, it will shut down.
    • Ensure adequate ventilation around the battery.
    • Reduce the load or charging current if the battery is consistently overheating.
Diagram detailing BMS protection features
Figura 10: Detallada view of the BMS protection mechanisms, including protection against overloading, overdischarge, temperature, short circuits, overcurrent, and overvoltage.

If these steps do not resolve the issue, please contact DATOUBOSS customer support for further assistance.

8. Especificacions

AtributEspecificació
MarcaDATOUBOSS
Model12v300Ah
Volum nominaltage12.8 Volts
Capacitat nominal300 Ah
Energia utilitzable3840 Wh
Màx. Corrent de descàrrega contínua300A
Màx. Potència de càrrega3840W
Cicle de Vida6000+ Cycles at 80% DOD (up to 15000 cycles)
Tipus de bateriaLiFePO4 (fosfat de ferro de liti)
Protecció BMS200A (Overcharge, Over-discharge, Overcurrent, Short Circuit, Temperature)
Classificació de protecció d'entrada (IP).IP65 (impermeable i a prova de pols)
Dimensions (L x A x A)19.69 x 10.24 x 8.66 polzades (50 x 26 x 22 cm)
Pes de l'article60.9 lliures (27.7 kg)
Temperatura de funcionament (càrrega)0 °C ~ 45 °C
Temperatura de funcionament (descàrrega)-20 °C ~ 65 °C
Max. System Configuration4P4S

9. Garantia i Suport

For warranty information, technical support, or any questions regarding your DATOUBOSS LiFePO4 battery, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact details.

Manufacturer: DATOUBOSS

Seller: Henan Zhongri New Energy Co., Ltd.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.