1. Introducció
The DATOUBOSS Home Energy Storage All-in-One Machine is an integrated system combining a 48V 11KW hybrid inverter with a 32.15kWh LiFePO4 battery package. This unit is designed for home energy storage, off-grid solar systems, and emergency power supply, offering a convenient and efficient solution without the need for separate inverter and battery purchases or complex wiring.
Figura 1: Mésview of the DATOUBOSS All-in-One Energy Storage System.
2. Instruccions i advertències de seguretat
Please read, understand, and follow all instructions and applicable documentation completely before using or installing this product. Keep all manuals and documentation in a safe place for future reference. Installation must be performed by qualified professionals.
- Use safety equipment and insulated tools.
- Ensure the installation complies with applicable local and national electrical codes.
- Assegureu-vos que el sistema estigui correctament connectat a terra.
- Install the battery in a suitable position for the electronic device.
- Keep the battery within a safe temperature range (-10°C to 50°C) for stable operation.
- Use an appropriate cleaner (e.g., dry cloth) to clean the battery. Do not use aerosol cleaners, liquids, sprays, or solvents.
- Assegureu-vos que tots els elements de fixació estiguin ben ajustats.
- Do not incinerate, crush, or puncture the battery.
- Do not place the battery in a dangerous or flammable environment where it may come into contact with corrosive chemicals or vapors.
- Do not store or install this product near radiators, heat collectors, kitchens, or enclosures where it may be exposed to sustained overheating.
- No submergiu aquest producte en líquid.
- Risk of fire, explosion, and burns: If electrical odors or overheating occur, safely disconnect the circuit breaker and call the fire department.
- Keep away from damaged batteries and any leaking liquid (electrolyte) or flammable gas. In case of inhalation, evacuate the area and seek medical attention.
- If battery leakage comes into contact with eyes or skin, rinse the affected area with running water for 15 minutes and seek medical attention.
- ADVERTIMENT: When installing the product, it is necessary to turn off and disconnect the power.
Figure 2: Safety Instructions and Warnings.
3. Components del producte
The DATOUBOSS Home Energy Storage All-in-One Machine integrates a hybrid inverter, MPPT controller, and LiFePO4 battery into a single unit. This design simplifies installation and operation by eliminating the need for separate devices and complex interconnections.
Figure 3: Integrated components of the DATOUBOSS All-in-One Machine.
Què hi ha a la caixa:
- DATOUBOSS Integrated Home Energy Storage System (48V 628Ah LiFePO4 Battery + 11KW Hybrid Inverter)
- Manual d'usuari
4. Guia d'instal·lació
Preparació:
- Assegureu-vos que l'equip estigui apagat abans de la instal·lació.
- Installation is recommended to be performed by a professional electrician.
Consideracions de muntatge:
Before choosing a mounting location, consider the following:
- Use safety devices and insulated tools in accordance with applicable local and national electrical codes.
- Do not install the product in harsh environments. Ambient temperature must be between 0°C and 55°C.
- Avoid dangerous, flammable, or corrosive chemicals or vapors.
- Keep away from heat sources like radiators or stoves.
- Ensure no children or pets are present nearby.
- Do not install on flammable building materials. Install vertically on a solid wall.
- Allow sufficient space for heat dissipation and cable removal.
- Install the device at eye level for easy LCD screen readability.
- Ensure proper grounding, braiding, tightening, and wiring.
Eines necessàries:
- Phillips screwdriver, torque wrench, rivet pliers of appropriate size.
- Appropriate cables and terminals matching the battery pack's safe current and installation dimensions.
Desembalatge i inspecció:
- Inspect the equipment before installation. Ensure the packaging is intact.
- Verify that the package contains the integrated home energy storage system and the user manual.
Figure 4: Product Installation Instructions.
5. Instruccions de funcionament
Powering On/Off Sequence:
To turn on the device, first press the battery ON/OFF switch, then the inverter ON/OFF switch.
- Bateria ON/OFF: Press the battery ON button. The operation and power indicators will light up.
- Inverter ON/OFF: Press the inverter ON button. The inverter screen will light up.
- FV ENCÈS/APAGAT: Turn on the PV switch and ensure power is on and the PV cable is connected. The product will start PV charging. Turning off the PV switch stops PV input.
- AC Input ON/OFF: Activate the AC input switch and ensure power is connected. The product starts AC charging. Deactivating the AC switch stops AC input.
- AC Output ON/OFF: Activate the AC output switch. The AC output port connects to an external load device, and the product starts charging the external load device. Deactivating the AC switch stops AC output.
Figure 5: Basic ON/OFF Functions.
Interfície de pantalla tàctil:
The device features a color touch screen for easy and intuitive operation, allowing users to monitor battery information and switch between multiple pages. This modern interface offers a smoother user experience and longer service life compared to traditional buttons.
Figure 6: Touch Screen Interface.
LCD Display Screens:
The LCD provides detailed information about the system's operation. Navigate through the screens using the touch interface to view:
- Detail Screen: Displays machine type, LCD/inverter/driver/main versions, and various temperature readings (boosting, machine, MPPT, MOS).
- Solar Screen: Shows PV input voltage, current, power, and daily/monthly/yearly/total kWh generated.
- Battery Screen: Provides battery type, BMS communication status, battery voltage, charge/discharge current, and bus voltage.
- BMS Screen: Details BMS 485 protocol, State of Charge (SOC), charge/discharge current, BMS temperature, discharge/charge limit voltage, and charge limit current.
Figure 7: LCD Detail Screen.
Figure 8: LCD Solar Screen.
Figure 9: LCD Battery Screen.
Figure 10: LCD BMS Screen.
6. Manteniment
The integrated LiFePO4 battery features a built-in Battery Management System (BMS) that provides comprehensive protection against overcharge, over-discharge, overcurrent, short circuits, over-temperature, and low-temperature conditions. This significantly reduces maintenance requirements and extends the battery's lifespan.
Atenció general:
- Regularly inspect the unit for any visible damage or loose connections.
- Keep the unit clean and free from dust. Use a dry cloth for cleaning.
- Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.
- Eviteu exposar la unitat a temperatures extremes o a la llum solar directa durant períodes prolongats.
7. Solució De Problemes
The touch screen display includes an alert mode to help identify and resolve issues. If error codes or warnings appear, refer to the detailed solutions provided in the full manual. If you are unable to resolve the problem, please contact our professional technical support team.
Problemes comuns:
- Sense energia: Check all circuit breakers (AC input, AC output, PV, battery) and ensure they are in the ON position. Verify all cables are securely connected.
- No PV Charging: Ensure PV panels are connected, the PV switch is ON, and there is sufficient sunlight. Check PV input voltage a la pantalla LCD.
- No AC Charging: Ensure AC input is connected and the AC input switch is ON.
- Sense sortida de CA: Ensure the AC output switch is ON and the load is connected correctly. Check for overload conditions on the LCD.
- Codis d'error: Note down any error codes displayed on the LCD and consult the comprehensive manual or contact support.
8. Especificacions
Figura 11: Especificacions tècniques detallades.
| Característica | Especificació |
|---|---|
| Model | JC-1132 |
| Tipus de bateria | LiFePO4 628 Ah |
| Capacitat de la bateria | 32.15 KWh |
| Dimensions (L x A x A) | 580 x 580 x 937 mm |
| Pes | 239 kg |
| Volum nominaltage | 51.2 V |
| Life Cycle @ 25°C | 8000 cycles, 70% (SOH) |
| Life Cycle @ 45°C | 3000 cycles, 70% (SOH) |
| Mode PV | MPPT |
| Potència d’entrada màxima PV | 2 * 7500 W |
| Interval de seguiment MPPT | 90-500 VDC |
| òptim voltage | 360-430 VDC |
| Volum d'entrada PV màximtage | 500 VDC |
| Corrent màxim d'entrada PV | 18 A |
| Max PV Charge Current | 150 A |
| Max AC Charge Current | 150 A |
| Corrent de càrrega màxima | 150 A |
| Formulari d'entrada | L+N+PE |
| Volum d’entrada nominaltage | 220/230/240 VCA |
| Voltage Rang | 90-280 VAC 3V (Normal Mode), 170-280 VAC 3V (UPS Mode) |
| Interval de freqüència | 50Hz/60Hz (Adaptive) |
| Nominal Inverter Power | 11000 W |
| Nominal PV Inverter Power | 12000 W |
| Vol. De sortidatage | 220/230/240 VAC ±5% |
| Freqüència de sortida | 50/60 Hz ±0.1% |
| Forma d'ona | Onda senyal pura |
| Potència màxima | 22000 VA |
| Capacitat de sobrecàrrega | Battery Mode: 11s @ 105-150% load, 2s @ 150-200% load, 400ms @ >200% load |
| Pantalla LCD | Displays operating measurements, loads, inputs, outputs, etc. |
| Temperatura de funcionament | -10 a 50 °C |
| Humitat relativa | 20% a 95% (sense condensació) |
| Temperatura d'emmagatzematge | -15 a 60 °C |
| Altitud sobre el nivell del mar | Max 1000m. Power derating required above 1000m up to 4000m. |
| Nivell de soroll | <50 dB |
9. Garantia i Suport
DATOUBOSS guarantees the quality of its products. This all-in-one machine comes with a 5 any de garantia.
Atenció al client:
We offer professional 24-hour customer service. If you have any questions about the product, encounter issues, or require assistance, please do not hesitate to contact us through Amazon. Our friendly and patient customer service team is ready to help.
Multi-language Manuals:
While a printed English instruction manual is included in the package, electronic manuals are available in various languages. If you require a manual in a different language, please contact us via Amazon, and we will send it to you as soon as possible.