ERYUE ERYUE4fhj278t0e

ERYUE Keyless Entry Wireless Engine Lock Anti-Hijacking Car Immobilizer System User Manual

Model: ERYUE4fhj278t0e

1. Producte acabatview

The ERYUE Keyless Entry Wireless Engine Lock Anti-Hijacking Car Immobilizer System is designed to enhance vehicle security for any 12V car. This system provides both anti-theft and anti-hijacking functionalities through a proximity card, ensuring your vehicle remains secure. It features adjustable detection range, a low battery alert system, and an emergency release mode for convenience.

2. Components inclosos

El paquet conté els elements següents:

  • 1 x Anti-Theft Device (Main Control Unit)
  • 2 x Remote Control (Proximity Cards)
  • 2 x CR2032 Batteries (for Proximity Cards)
  • 2 x Key Rings
  • 3 x lligadures de cable
  • 1 x Manual d'usuari
All components of the ERYUE car immobilizer system, including the main unit, two proximity cards, batteries, key rings, and cable ties.

Figure 2.1: Complete set of ERYUE Car Immobilizer System components.

3. Especificacions

CaracterísticaEspecificació
Tipus d'elementImmobilitzador de cotxes
MaterialABS (acrilonitril butadiè estirè)
Mode d'alarmaAlarma de so
Alimentació Voltage12 V ± 3 V
Voltage12 V
Temps de resposta de l'alarma0.1S
Proximity Card Battery TypeCR 2032 (2 included)
Proximity Card Battery Capacity210 mAh
Vehicle aplicable12V car
Induction Detection Range2-8 metres (ajustable)
Freqüència2.4 GHz
Dimensions (L x A x A)5.11 x 3.54 x 1.57 polzades

4. Instal·lació i cablejat

This system is compatible with any 12V car and can be installed alongside existing anti-theft alarms. Ensure the vehicle's power is disconnected before beginning installation.

4.1 Instruccions de cablejat

Connect the wires from the main control unit according to the following scheme:

  • Fil vermell: Connect to the positive (+) terminal of the vehicle's power supply.
  • Fil negre: Connect to the negative (-) terminal (ground) of the vehicle's power supply.
  • Fil groc: Connect to the input signal.
  • Fil verd: Connect to the output signal.
The main control unit of the immobilizer system with its various colored wires spread out for connection.

Figure 4.1: Main control unit with wiring harness.

Primer pla view of the compact main control unit of the ERYUE immobilizer system.

Figure 4.2: Close-up of the main control unit.

4.2 Concealment

Due to its small size, the device can be easily concealed within the vehicle, enhancing its effectiveness.

5. Funcionament

The system operates based on the detection of the proximity card within a specified range.

5.1 Anti-Theft Function

If the system does not detect the proximity card, the vehicle will be prevented from starting. This function activates if an attempt is made to start the vehicle without the authorized proximity card present.

5.2 Anti-Hijacking Function

When the vehicle is running, if the proximity card is removed from the vehicle's detection range, the system will automatically shut off the engine after 1 minute. This provides a safety measure in case of vehicle theft while in operation.

5.3 Adjustable Induction Detection Range

The system's detection range for the proximity card can be adjusted between 2 and 8 meters to suit user preferences and vehicle environment.

5.4 Emergency Release Mode (Car Wash/Maintenance Mode)

An emergency release mode is available for situations such as car washes or vehicle maintenance, allowing the vehicle to operate without the proximity card for a temporary period. Refer to the specific instructions in the included manual for activating and deactivating this mode.

6. Manteniment

6.1 Proximity Card Battery Replacement

The proximity cards are powered by CR2032 batteries. The system includes a low voltage alarm prompt function that will alert you when the battery inside the induction card is too low. When this occurs, replace the battery promptly to ensure continuous protection.

Per substituir la bateria:

  1. Carefully open the proximity card casing.
  2. Traieu la bateria CR2032 antiga.
  3. Inseriu una nova bateria CR2032, assegurant la polaritat correcta.
  4. Close the proximity card casing de manera segura.

7. Solució De Problemes

While this manual does not provide specific troubleshooting steps, consider the following general advice if you encounter issues:

  • El sistema no respon: Ensure all wiring connections are secure and correctly installed according to Section 4.1.
  • Proximity Card Issues: Check the battery in the proximity card (refer to Section 6.1 for replacement). Ensure the card is within the detection range.
  • Unexpected Engine Shut-off: Verify that the proximity card is continuously within the detection range while the vehicle is running. If the card is removed or its battery is low, the anti-hijacking function will activate.
  • Sons d'alarma: A sound alarm indicates a security event or a low battery in the proximity card. Address the underlying cause.

8. Garantia i Suport

Specific warranty information and direct customer support contacts are not provided in the product details. Please refer to your purchase documentation or contact the retailer for details regarding warranty coverage and technical assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.