Introducció
This manual provides essential instructions for the safe setup, operation, and maintenance of your FUNSICLE Round Tubular Pool, Model 16839. Please read this document thoroughly before beginning assembly or using the pool. Proper installation and care will ensure a long lifespan for your pool and a safe swimming experience.
Image: The FUNSICLE Round Tubular Pool, Model 16839, shown with its protective cover installed. The pool features a brown woven-look exterior.
Informació de seguretat
ADVERTIMENT: El no seguir aquestes instruccions de seguretat pot provocar lesions greus o la mort.
- Cal la supervisió d'un adult en tot moment quan els nens siguin a la piscina o a prop.
- No us submergiu ni salteu a la piscina. La profunditat de l'aigua no és suficient per bussejar.
- Ensure all safety devices, such as the safety ladder and pool cover, are properly installed and functioning. After swimming, replace your safety devices and ensure they are functioning correctly.
- Keep children away from the pool when it is not in use.
- Do not allow running or rough play around the pool area.
- Keep electrical devices away from the pool.
- Regularly check the pool structure for any signs of damage or wear.
- Mantenir una química adequada de l'aigua per evitar problemes de salut.
Contingut del paquet
Verify that all components listed below are present in your package before beginning assembly. If any parts are missing or damaged, contact customer support.
- FUNSICLE Round Tubular Pool Liner (Brown Woven Design)
- Durable Steel Frame Components
- RX1000 Cartridge Filter Pump
- Type C Filter Cartridge
- Escala de seguretat
- Maintenance Kit (includes surface skimmer, bottom skimmer, telescopic pole)
- Protective Pool Cover
- Estora de terra
Image: Components of the included maintenance kit, featuring a skimmer net, a vacuum head, and a telescopic pole for cleaning.
Instruccions de configuració
The FUNSICLE Round Tubular Pool is designed for quick and easy assembly without the need for special tools. Follow these general steps for installation:
- Selecció del lloc: Choose a firm, level surface free from sharp objects, debris, or overhead obstructions. The area should be large enough to accommodate the pool and provide adequate space around it for safe access.
- Preparació del sòl: Lay down the included ground mat on the selected site. Ensure the surface is completely flat and stable.
- Muntatge del marc: Unpack all frame components. Follow the diagrams in the separate assembly guide (if provided) to connect the steel tubes and connectors. Ensure all connections are secure.
- Instal·lació del revestiment: Carefully spread the pool liner inside the assembled frame. Ensure the drain plug is accessible and closed. Smooth out any wrinkles in the bottom of the liner.
- Omplint la piscina: Begin filling the pool with water. As the water level rises, continue to smooth out wrinkles from the center outwards. Stop filling when the water reaches the recommended fill line.
- Connexió de la bomba del filtre: Connect the RX1000 cartridge filter pump according to its specific instructions. Ensure all hoses are securely attached and clamps estan apretades.
- Muntatge d'escala: Assemble the safety ladder as per its instructions and place it securely against the pool wall.
Image: The FUNSICLE Round Tubular Pool in use, demonstrating its capacity for multiple swimmers.
Instruccions de funcionament
- Funcionament de la bomba de filtre: Operate the RX1000 cartridge filter pump daily for several hours to ensure proper water circulation and filtration. Refer to the filter pump manual for specific operating times based on pool usage and water conditions.
- Química de l'aigua: Regularly test the pool water for pH, chlorine, and alkalinity levels using a pool test kit. Adjust chemicals as needed to maintain balanced water, which is crucial for swimmer safety and pool longevity.
- Desnatat: Use the included surface skimmer to remove leaves, insects, and other debris from the water surface daily.
- Coberta de piscina: Use the protective pool cover when the pool is not in use to prevent debris from entering the water and to reduce water evaporation.
Manteniment
- Neteja/substitució del cartutx del filtre: The Type C filter cartridge should be rinsed with a garden hose every few days and replaced every 2-4 weeks, depending on pool usage and water quality. A dirty filter reduces pump efficiency.
- Neteja del revestiment: Use the bottom skimmer and telescopic pole to vacuum or brush the pool floor and walls as needed to remove settled debris and algae.
- Nivell d'aigua: Ensure the water level is maintained between the minimum and maximum fill lines. Evaporation and splash-out can reduce the water level.
- Hivernització: Before freezing temperatures arrive, drain the pool completely. Clean and dry all components thoroughly. Store the liner, frame, pump, and accessories in a dry, protected area to prevent damage.
Resolució de problemes
This section addresses common issues you might encounter. For more complex problems, consult the filter pump manual or contact customer support.
- Aigua ennuvolada:
- Check and clean/replace the filter cartridge.
- Test water chemistry and adjust chlorine/pH levels.
- Ensure the filter pump is running for sufficient hours daily.
- Pump Not Circulating Water:
- Ensure the pump is plugged in and receiving power.
- Check for blockages in the skimmer, pump basket, or hoses.
- Verify the filter cartridge is not excessively dirty.
- Bleed air from the pump system if necessary (refer to pump manual).
- Fuga d'aigua:
- Inspect the liner for punctures or tears. Use a vinyl repair kit for small holes.
- Comproveu totes les connexions de les mànegues i apreteu-les.amps.
- Assegureu-vos que el tap de drenatge estigui ben tancat.
Especificacions
| Marca | FUNSICLE |
| Número de model | 16839 |
| Forma | Ronda |
| Color | Brown (Woven Design) |
| Dimensions (Diàmetre x Alçada) | Ø4.57m x 1.22m |
| Capacitat | 17420 litres |
| Material | Clorur de polivinil (PVC) |
| Pes de l'article | 80.86 quilos |
| Components inclosos | Cartridge Filter Pump, Safety Ladder, Maintenance Kit, Protective Cover, Ground Mat |
| Muntatge obligatori | Yes (Tool-free installation) |
| Ús | A l'aire lliure |
Image: An illustrative diagram detailing the reinforced multi-layered PVC construction of the pool liner, highlighting its durability.
Garantia i Suport
This FUNSICLE pool comes with a 2-year availability of spare parts in the EU, indicating support for components. For warranty claims, technical assistance, or to order replacement parts, please contact the seller, Provence Outillage, or refer to the contact information provided with your purchase documentation.
For additional safety information, you may refer to the official safety document: Informació de seguretat (PDF).
