Introducció
This manual provides comprehensive instructions for the safe assembly, proper use, and maintenance of your tectake Metal Display Cabinet, model 406418. Please read all instructions carefully before beginning assembly and retain this manual for future reference. Ensure all components are present and undamaged before proceeding.
Instruccions de seguretat
- Es requereix assemblea d'adults: Aquest producte conté peces petites i requereix el muntatge per part d'un adult. Mantingueu els nens i les mascotes allunyats durant el muntatge.
- Utilitzeu les eines adequades: Ensure you have the necessary tools for assembly (e.g., screwdriver, hammer if needed).
- Superfície estable: Assemble the cabinet on a clean, flat, and stable surface to prevent damage or injury.
- Protecció antivuelco: Always install the provided anti-tip hardware to secure the cabinet to a wall. This prevents accidental tipping, which can cause serious injury.
- Distribució de pes: Distribute weight evenly on shelves. Do not exceed the maximum load capacity per shelf (25 kg). Place heavier items on lower shelves.
- Eviteu la sobrecàrrega: Do not overload the cabinet. Overloading can compromise stability and cause damage.
- Manipulació de vidre: Handle glass components with care to avoid breakage and injury. Wear protective gloves if necessary.
- Comprovacions periòdiques: Reviseu periòdicament tots els elements de fixació per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
Contingut del paquet
Abans de començar el muntatge, comproveu que tots els components següents siguin presents i no estiguin danyats:
- Metal Display Cabinet components (frame, panels, doors)
- Adjustable glass shelves (2 pieces)
- Maquinari antivol
- Ferramenteria de muntatge (cargols, perns, etc.)
- Manual d'instruccions de muntatge
If any parts are missing or damaged, please contact tectake customer support before proceeding with assembly.
Especificacions
| Número de model: | 406418 |
| Dimensions totals (L x P x A): | 80 cm x 37 cm x 90.5 cm (aproximadament 31.5 polzades x 14.6 polzades x 35.6 polzades) |
| Dimensions interiors (amplada x profunditat x alçada): | 79 cm x 30 cm x 68 cm (aproximadament 31.1 polzades x 11.8 polzades x 26.8 polzades) |
| Shelf Dimensions (W x D x H): | 79 cm x 30 cm x 2 cm (aproximadament 31.1 polzades x 11.8 polzades x 0.8 polzades) |
| Distància a terra: | 15 cm (approximately 5.9 in) |
| Adjustable Feet Height: | Up to 1.5 cm (approximately 0.6 in) |
| Material: | Powder-coated steel, Glass, Polypropylene |
| Gruix del vidre: | 4 mm |
| Capacitat de càrrega màxima per prestatge: | 25 kg (aproximadament 55 lliures) |
| Pes del producte: | 21.8 kg (aproximadament 48 lliures) |
Figura 1: Product dimensions overview. All measurements are approximate.
Instruccions de muntatge
Follow these steps carefully to assemble your tectake Metal Display Cabinet. It is recommended to have two people for assembly.
- Prepara la zona: Clear a spacious, clean, and flat area for assembly. Lay down a blanket or cardboard to protect the cabinet parts and your floor.
- Identificar els components: Unpack all components and compare them with the package contents list. Familiarize yourself with the different parts.
- Muntar el marc: Begin by connecting the main frame components (side panels, top, and bottom panels) using the provided screws and fasteners. Ensure all connections are secure but do not overtighten initially.
- Fixeu el panell posterior: Carefully slide or attach the back panel into its designated grooves or mounting points. Secure it with the appropriate fasteners.
- Instal·leu els peus ajustables: Screw the adjustable feet into the bottom corners of the cabinet. These can be adjusted later to level the cabinet on uneven floors.
- Install Door Hinges and Doors: Attach the hinges to the cabinet frame and then to the glass doors. Carefully mount the doors onto the cabinet. Ensure the doors swing freely and align correctly. The magnetic closures should engage properly.
- Inserir prestatges de vidre: The cabinet features adjustable shelf supports. Insert the shelf pins into the desired height slots. Carefully place the glass shelves onto these supports. Ensure they are stable before placing items on them.
- Instal·leu els elements antibolcada: This is a critical safety step. Securely attach the anti-tip hardware to the top rear of the cabinet and then to a wall stud using appropriate wall anchors (not always included, check local building codes). This prevents the cabinet from tipping over.
- Ajustaments finals: Once assembled, gently move the cabinet to its final position. Adjust the feet to ensure the cabinet is level and stable. Check all screws and fasteners for tightness.
Figura 2: Detail of adjustable shelves, magnetic door closure, and ergonomic handles.
Figura 3: Fully assembled cabinet with doors open, illustrating storage capacity.
Instruccions de funcionament
- Obertura i tancament de portes: Gently pull the door handles to open the glass doors. The magnetic closure will release. To close, push the doors firmly until the magnets engage.
- Ajust de prestatgeries: To adjust the height of the glass shelves, carefully remove all items from the shelf. Lift the shelf slightly and remove the shelf pins from their current slots. Reinsert the pins into the desired new slots, ensuring they are level and secure. Then, carefully place the glass shelf back onto the pins.
- Carregant elements: Place items carefully onto the shelves, ensuring weight is distributed evenly. Do not exceed the maximum load capacity of 25 kg per shelf.
Figura 4: Cabinet in use, displaying various items.
Manteniment
- Neteja de l'armari: Netegeu les superfícies metàl·liques amb un drap suau iamp cloth. Avoid abrasive cleaners or harsh chemicals, as they can damage the powder coating.
- Cleaning Glass Panels: Use a standard glass cleaner and a soft, lint-free cloth to clean the glass doors and side panels.
- Pols: Regularly dust the cabinet and its contents to maintain its appearance. The elevated ground clearance facilitates easy cleaning underneath the cabinet.
- Comprovació dels elements de fixació: Periodically inspect all screws and connections to ensure they are tight. Retighten if necessary to maintain stability.
Figura 5: Easy maintenance due to elevated design.
Resolució de problemes
- Cabinet is wobbly or unstable:
- Ensure all assembly screws are tightened. Adjust the leveling feet at the bottom of the cabinet to compensate for uneven flooring. Verify that the anti-tip hardware is securely installed to a wall stud.
- Doors do not close properly or are misaligned:
- Check the hinge alignment and adjust if necessary. Ensure the magnetic closures are properly positioned and free from obstruction. Verify that the cabinet itself is level.
- Glass shelves are not level:
- Ensure the shelf pins are inserted into corresponding slots on both sides of the cabinet at the same height. Check that the cabinet is level using the adjustable feet.
- Peces que falten o danyades:
- Do not proceed with assembly. Contact tectake customer support immediately for assistance and replacement parts.
Garantia i Suport
For warranty information, technical support, or to order replacement parts, please refer to the contact information provided with your purchase documentation or visit the official tectake weblloc web. Si us plau, tingueu a mà el número de model (406418) i la data de compra quan us poseu en contacte amb el servei d'assistència.