JUMMICO Massage Office Chair Model 26OCBC1030 User Manual

1. Introducció

Thank you for choosing the JUMMICO Massage Office Chair Model 26OCBC1030. This ergonomic executive chair is designed to provide comfort and support for long hours of work or relaxation. It features a 6-point vibration massage system, soothing heat therapy, a 90°-150° recline function, and an extendable footrest. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your chair.

Image 1.1: The JUMMICO Massage Office Chair in a reclined position with a user relaxing.

2. Instruccions de seguretat

• Llegiu totes les instruccions abans de muntar-les i utilitzar-les.
• Do not stand on the chair. Use it only for seating one person.
• Ensure all bolts and screws are securely tightened before use. Re-tighten periodically.
• Mantingueu els nens allunyats de les peces mòbils durant el muntatge i l'ajust.
• Do not use the massage or heat function if the power cord or plug is damaged.
• Avoid placing the chair near heat sources or in direct sunlight for extended periods.
• Do not use abrasive cleaners or harsh chemicals on the chair's upholstery.
• Maximum weight capacity for this chair is 400 lbs (181 kg). Do not exceed this limit.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar el muntatge. Si falta alguna peça o hi ha alguna peça danyada, poseu-vos en contacte amb el servei d'atenció al client.

• Respatller
• Coixí de seient amb reposabraços
• Base (5-star)
• Casters (5 pcs)
• Cilindre d'elevació de gas
• Coberta elevadora de gas
• Placa de mecanisme
• Muntatge reposapeus
• Control remot de massatge
• Paquet de ferramenta (cargols, volanderes, clau Allen)
• Manual d'usuari (aquest document)

4. Instruccions de muntatge

Assembly typically takes 20-30 minutes. It is recommended to assemble the chair on a soft, clean surface to prevent damage.

1. Fixeu les rodes a la base: Insert each caster into the holes at the end of each leg of the 5-star base until it clicks securely into place.
2. Inseriu l'elevador de gas: Place the gas lift cylinder into the center hole of the assembled base. Cover the gas lift with the telescopic plastic cover.
3. Attach Mechanism Plate: Align the mechanism plate with the screw holes on the underside of the seat cushion. Ensure the front of the mechanism faces the front of the seat. Secure with screws provided in the hardware pack.
4. Connectar el seient a la base: Col·loqueu amb cura el seient muntat sobre el cilindre d'elevació de gas, assegurant-vos que estigui centrat i estable.
5. Col·loca el respatller: Align the backrest brackets with the corresponding holes on the seat cushion's rear. Secure with screws.
6. Instal·leu el reposapeus: Attach the footrest assembly to the designated slots under the seat, securing it with the provided hardware.
7. Connect Massage Unit: Plug the massage unit's power cord into a standard electrical outlet. Connect the remote control to the chair's designated port.

5. Instruccions de funcionament

5.1 Ajustaments de la cadira

• Ajust d'alçada: Pull the lever located under the right side of the seat upwards to raise or lower the chair. Release the lever at the desired height.
• Funció reclinable: Pull the lever on the left side of the seat upwards to unlock the recline mechanism. Lean back to your desired angle (90° to 150°) and push the lever down to lock it in place.
• Reposapeus extensible: Pull the footrest handle located under the front of the seat to extend the footrest. Push it back in to retract.

Image 5.1: Illustration of the chair's recline angles and extendable footrest.

5.2 Massage and Heat Functions

The chair features a 6-point vibration massage system and a soothing heat function, controlled by the included remote.

• Encès/apagat: Press the 'Power' button on the remote to activate or deactivate the massage and heat functions.
• Modes de massatge: Select from 5 different massage modes (e.g., Pulse, Press, Wave, Auto, Normal) using the 'Mode' button.
• Ajust d'intensitat: Use the '+' and '-' buttons to adjust the massage intensity.
• Targeted Massage Zones: The remote allows you to select specific massage zones: Back, Lumbar, Thigh, and Hips.
• Funció de calor: Press the 'Heat' button to turn the lumbar heating on or off.
• Temporitzador: Set the massage duration using the 'Timer' button (e.g., 15, 30, 60 minutes).

Imatge 5.2: acabatview of the 6-point massage and heat therapy zones with remote control.

5.3 Side Pocket

A convenient side pocket is integrated into the chair's design, ideal for storing the massage remote control, your phone, or other small items.

Image 5.3: Detail of the chair's integrated side pocket.

6. Manteniment

• Neteja: Wipe the leather upholstery with a soft, damp cloth. For stubborn stains, use a mild leather cleaner and follow the product instructions. Do not use abrasive cleaners or solvents.
• Inspecció: Periodically check all screws and bolts to ensure they are tight. Re-tighten as necessary to maintain stability and safety.
• Cura de les rodes: Clean casters regularly to remove hair and debris that may hinder smooth movement.
• Components elèctrics: Ensure the power cord and remote control are free from damage. Unplug the chair when not in use for extended periods.

7. Solució De Problemes

8. Especificacions

Imatge 8.1: Dimensions detallades del producte.

9. Garantia i Suport

JUMMICO provides a limited warranty for this product. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, missing parts, or warranty claims, please contact JUMMICO customer service through the retailer where the product was purchased or visit the official JUMMICO weblloc.

When contacting support, please have your model number (26OCBC1030) and purchase information readily available.