Generic Foldable Baby Bathtub with Thermometer and Changing Table

1. Introducció

Thank you for choosing the Generic Foldable Baby Bathtub with Thermometer and Changing Table. This product is designed to provide a safe, practical, and comfortable bathing and changing experience for your baby. Its ergonomic design, resistant structure, and foldable system ensure stability, convenience, and easy storage. Please read this manual carefully before assembly and use to ensure proper operation and safety.

Imatge 1.1: acabatview of the Foldable Baby Bathtub with its key features: ergonomic design, resistant structure, premium material, integrated thermometer, changing table, foldable system, suitable for 0-16kg, and 35L capacity.

2. Instruccions de seguretat

ADVERTÈNCIA: Si no es segueixen aquestes instruccions de seguretat, es poden produir lesions greus o la mort.

• Always supervise your child: Never leave your child unattended in or near the bathtub, even for a moment. Drowning can occur quickly and in very shallow water.
• Comprovar la temperatura de l'aigua: Always check the water temperature before placing your baby in the tub. The integrated thermometer provides a reading, but always double-check with your elbow or wrist. Ideal temperature is between 36°C and 38°C (96.8°F and 100.4°F).
• Weight and age limits: This product is suitable for babies from 0 months up to a maximum weight of 16 kg (approximately 35 lbs). Do not exceed this weight limit.
• Estabilitat: Ensure the bathtub and stand are fully assembled and stable on a flat, non-slip surface before use. Do not use if any part is damaged or unstable.
• Nivell d'aigua: Fill the bathtub only to the recommended level, typically up to the baby's waist when seated.
• Seguretat del canviador de taules: Always secure your baby with the safety straps on the changing table. Never leave your baby unattended on the changing table.
• Mantenir allunyat de la calor: Do not place the bathtub or changing table near heat sources, open flames, or direct sunlight for prolonged periods.
• Muntatge: Ensure all components are correctly assembled according to the instructions before each use.
• Manteniment: Inspeccioneu regularment el producte per detectar qualsevol signe de desgast, danys o peces soltes. Deixeu d'utilitzar-lo si detecteu algun dany.

3. Contingut del paquet

Please verify that all components are present and undamaged upon opening the package:

• 1x Foldable Baby Bathtub with Integrated Thermometer
• 1x Bathtub Support Stand (Foldable)
• 1x Changing Table

Image 3.1: The complete kit including the foldable bathtub, support stand, and changing table.

4. Muntatge i muntatge

Follow these steps to assemble your baby bathtub and changing station:

4.1. Assembling the Support Stand

1. Unfold the support stand by gently pulling its legs apart until they lock into place. Ensure all four legs are fully extended and stable.
2. Verify that the locking mechanisms (if present) are engaged to prevent accidental folding during use.

4.2. Attaching the Bathtub to the Stand

1. Place the foldable bathtub onto the assembled support stand.
2. Ensure the bathtub sits securely within the stand's frame. The bathtub should click or fit snugly into designated slots on the stand.
3. Gently push down on the bathtub to confirm it is stable and does not wobble.

4.3. Attaching the Changing Table

1. Position the changing table over the bathtub, aligning its attachment points with the stand or bathtub frame.
2. Secure the changing table according to its design, ensuring it is firmly attached and stable. Some models may have clips or straps.

5. Instruccions de funcionament

5.1. Using the Bathtub

The bathtub can be used in two configurations: on its support stand or directly on the floor.

Image 5.1: The baby bathtub can be used on its support stand or placed directly on the floor.

1. Preparació: Ensure the bathtub is clean and the drain plug is securely closed.
2. Farciment: Fill the bathtub with water. Always add cold water first, then hot water, mixing thoroughly.
3. Control de temperatura: Observe the integrated digital thermometer. The ideal water temperature for bathing a baby is between 36°C and 38°C (96.8°F and 100.4°F). Always confirm the temperature with your elbow or wrist before placing your baby in the water.


Image 5.2: Close-up of the integrated digital thermometer, showing a temperature reading of 37.0 degrees Celsius.

4. Bany: Gently place your baby into the bathtub. Always maintain a firm grip on your baby and never leave them unattended.
5. Drenatge: After bathing, open the drain plug to empty the water. The bathtub features a drainage valve for easy water removal.

5.2. Using the Changing Table

1. Col·locació: Ensure the changing table is securely attached to the bathtub stand.
2. Corretges de seguretat: Always use the safety straps to secure your baby on the changing table.
3. Supervisió: Never leave your baby unattended on the changing table, even for a moment.

Image 5.3: An adult changing a baby on the changing table. Always use safety straps and supervise your baby.

6. Manteniment i Neteja

• Cleaning the Bathtub: After each use, rinse the bathtub thoroughly with clean water. Use a mild soap and a soft cloth to clean any residue. Avoid abrasive cleaners or harsh chemicals that could damage the material.
• Cleaning the Changing Table: Wipe the changing table surface with a damp cloth and mild soap. Ensure it is completely dry before folding or storing.
• Assecat: Deixeu que tots els components s'assequin completament a l'aire abans de plegar-los o guardar-los per evitar la floridura o el míldiu.
• Inspecció: Regularly inspect all parts for wear, tears, cracks, or loose connections. If any damage is found, discontinue use and contact customer support.

7. Emmagatzematge

The foldable design allows for easy storage when not in use:

1. Ensure the bathtub and changing table are clean and completely dry.
2. Remove the changing table from the stand.
3. Remove the bathtub from the stand. The bathtub itself can be folded by pressing on its flexible sides.
4. Fold the support stand by releasing its locking mechanisms and bringing the legs together.
5. Guardeu tots els components en un lloc sec i fresc, allunyat de la llum solar directa.

Image 7.1: The bathtub and stand can be easily folded for compact storage and transport.

8. Solució De Problemes

• Bathtub wobbles on stand: Ensure the stand legs are fully extended and locked. Verify the bathtub is correctly seated in the stand's frame.
• Thermometer not displaying: Check if the thermometer is properly inserted or if it requires a battery (though typically integrated models are sealed). If issues persist, contact customer support.
• Drain plug leaking: Ensure the drain plug is fully inserted and sealed. Check for any debris preventing a tight seal.
• Dificultat per plegar/desplegar: Ensure no parts are obstructed. Apply gentle, even pressure. Do not force components.

9. Especificacions

Image 9.1: Approximate dimensions of the open and closed bathtub, and the assembled and disassembled support stand.

10. Garantia i Suport

This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For any questions, concerns, or technical support, please contact the retailer or manufacturer directly.