1. Introducció
Thank you for choosing the COLAMY Aether Executive Office Chair. This manual provides essential information for the proper assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use to ensure safe and efficient operation and to maximize the ergonomic benefits of your chair.
The Aether series is designed for extended periods of sitting, featuring advanced ergonomic technologies such as a levitating seat cushion, synchronized recline, and intuitive adjustments to support your posture and comfort.
Image 1.1: COLAMY Aether Executive Office Chair in use.
2. Informació de seguretat
- Ensure all components are securely fastened before use. Periodically check and tighten all screws.
- No us atureu a la cadira.
- No utilitzeu la cadira com a tamboret.
- No seure als recolzabraços.
- This chair is designed to support a maximum weight of 300 lbs (136 kg). Exceeding this limit may cause damage or injury.
- Mantingueu els nens allunyats de les peces mòbils durant l'ajust.
- Feu servir la cadira sobre una superfície plana per evitar que es bolqui.
3. Contingut del paquet
Before assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, contact COLAMY customer service.
- Muntatge del respatller
- Muntatge del seient
- Reposabraços (esquerra i dreta)
- Cilindre d'elevació de gas
- Base d’estrelles
- Rodes (5 peces)
- Paquet de ferramenta (cargols, clau Allen)
- Manual d'usuari (Aquest document)
4. Instruccions de muntatge
Assembly is required for this product. Please follow the steps below carefully. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Fixeu les rodes a la base: Insert each of the five casters into the holes at the end of each leg of the star base until they click securely into place.
- Inseriu l'elevador de gas: Col·loqueu el cilindre d'elevació de gas al forat central de la base en estrella.
- Fixar els reposabraços al seient: Secure the left and right armrests to the underside of the seat assembly using the provided screws and Allen wrench. Ensure they are oriented correctly.
- Fixar el respatller al seient: Align the backrest with the seat assembly and secure it using the designated screws.
- Connecteu el conjunt del seient a l'elevador de gas: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the center mechanism aligns with the top of the gas lift. Press down firmly to secure.
Image 4.1: Product Dimensions and Maximum Capacity.
5. Instruccions d'ús (ajustos)
The COLAMY Aether chair offers several intuitive adjustments for personalized comfort.
5.1. Seat Height Adjustment (One-Touch Control)
The chair features a convenient one-touch control for seat height adjustment, located on the right side, easily accessible while seated.
- Per elevar: While seated, lift the lever located under the right side of the seat. The seat will rise. Release the lever at the desired height.
- Abaixar: While seated, lift the lever located under the right side of the seat and apply slight body weight. The seat will lower. Release the lever at the desired height.
5.2. Synchronized Recline and Lock Mechanism
The synchronized recline system allows the backrest and armrests to move together, maintaining consistent support. The recline can be locked at various angles.
- Per reclinar-se: Push the recline lever (typically on the left side) outwards to unlock. Lean back to the desired angle.
- Per bloquejar la reclinació: Once at the desired recline angle, push the recline lever inwards to lock the position.
- Per tornar en posició vertical: While the recline is locked, lean forward slightly and push the lever outwards to unlock. The backrest will return to its upright position.
Image 5.2.1: Smart Recline & Lock Mechanism.
5.3. Adjustable Lumbar Support
The instinctive lumbar support system adjusts to your lower back curve.
- To Adjust Lumbar: Gently push or pull the lumbar support pad on the backrest to find your preferred position. The support will track your movements.
Image 5.3.1: Adjusting Lumbar Support.
5.4. 4D Armrests
The 4D armrests offer multi-directional adjustment for optimal arm and shoulder support.
- Ajust d'alçada: Press the button on the side of the armrest and slide it up or down. Release the button to lock.
- Ajust endavant/enrere: Feu lliscar el reposabraços cap endavant o cap enrere.
- Ajust de pivot: Gireu el reposabraços a l'esquerra o a la dreta.
- In/Out Adjustment: Slide the entire armrest assembly inwards or outwards.
Image 5.4.1: Adaptive Lumbar & 4D Armrests.
5.5. Ajust de la profunditat del seient
Adjusting the seat depth helps relieve leg pressure and ensures proper thigh support.
- Locate the seat depth adjustment lever (refer to your chair's specific mechanism, often a lever under the seat).
- Pull the lever and slide the seat forward or backward to achieve the desired depth. Ensure there is a small gap (about two fingers' width) between the edge of the seat and the back of your knees. Release the lever to lock.
Image 5.5.1: Adjustable Depth for Leg Pressure Relief.
5.6. Levitating Seat Cushion
The unique levitating seat cushion utilizes a structural elastic suspension system to distribute body weight evenly, reducing pressure points and promoting healthy blood circulation.
Image 5.6.1: Levitating Seat Cushion Technology.
6. Manteniment
- Neteja: For mesh and plastic surfaces, wipe with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners. For the seat cushion, spot clean with a fabric cleaner as needed.
- Inspecció: Reviseu periòdicament tots els cargols i perns per assegurar-vos que estiguin ben ajustats. Torneu a apretar-los si cal.
- Cura de les rodes: Clean casters regularly to remove hair and debris that may hinder smooth movement.
- Ascensor de gas: The gas lift is a sealed unit and requires no maintenance. Do not attempt to disassemble it.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La cadira no puja/baixa | Mal funcionament de l'elevador de gas o palanca no accionada. | Ensure the height adjustment lever is fully engaged. If the problem persists, the gas lift may need replacement. Contact customer support. |
| La cadira trontolla | Cargols solts o terra irregular. | Check and tighten all assembly screws. Ensure the chair is on a level surface. |
| Les rodes no giren suaument | Restes atrapades a les rodes. | Traieu els cabells, la pols o les restes de les rodes giratòries. |
| Recline mechanism not locking | Recline lever not fully engaged. | Ensure the recline lock lever is pushed fully inwards to engage the lock. |
8. Especificacions
- Model: ocm03-bk01-1.0
- Marca: COLÀMIA
- Color: Negre
- Material: Foam, Mesh, Plastic, Polyurethane
- Dimensions del producte (P x A x A): 22.24" x 28.74" x 43.9"
- Pes de l'article: 35.6 lliures
- Pes màxim recomanat: 300 lliures
- Característiques: 4D Armrests, Adjustable Height, Adjustable Lumbar, Recline Lock, Seat Depth Adjustment
- Estil d'esquena: Mid-Back
- Muntatge requerit: Sí
9. Garantia i Suport
For warranty information, technical support, or to order replacement parts, please contact COLAMY customer service. Refer to your purchase documentation for specific warranty terms and contact details.
You can typically find support information on the official COLAMY weblloc web o a través del venedor on vau comprar el producte.