Husky Glacier ARGB 240mm Water Cooler User Manual

1. Introducció

Thank you for choosing the Husky Glacier ARGB 240mm Water Cooler. This liquid cooling system is designed to provide efficient and quiet cooling for your CPU, enhancing your computer's performance and stability. It features addressable RGB lighting for customizable aesthetics and a pump with an integrated temperature display for real-time monitoring. This manual will guide you through the installation, operation, and maintenance of your new water cooler.

2. Informació de seguretat

• Desconnecteu sempre l'alimentació de l'ordinador abans de la instal·lació o el manteniment.
• Manipuleu els components amb cura per evitar danys.
• Assegureu-vos d'una connexió a terra adequada per evitar descàrregues electrostàtiques (ESD).
• Do not open the sealed liquid cooling loop; it contains coolant that should not be ingested or come into contact with skin.
• Mantenir fora de l'abast dels nens.
• Refer to your motherboard manual for specific header locations and power connections.

3. Contingut del paquet

Verify that all components are present in your package before beginning installation. If any items are missing or damaged, please contact customer support.

Figura 3.1: Contingut complet del paquet

• 240mm Radiator with integrated pump and tubing
• 2 ventiladors ARGB de 120 mm
• Intel Mounting Bracket Kit (LGA1700/1200/115X/2011/2066)
• AMD Mounting Bracket Kit (AM5/AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1)
• Placa posterior per a sòcols Intel
• Cargols de ventilador
• Cargols de muntatge del radiador
• Thermal Paste Syringe
• Manual d'usuari (aquest document)

4. Configuració i instal·lació

Follow these steps carefully to install your Husky Glacier ARGB 240mm Water Cooler.

4.1 Prepare the Radiator and Fans

Figure 4.1: Radiator Component

1. Attach the two 120mm ARGB fans to the radiator using the provided fan screws. Ensure the fan airflow direction is appropriate for your case (typically blowing air through the radiator and out of the case, or into the case for intake).
2. Connect the fan power cables to the fan headers on your motherboard or a fan controller.
3. Connect the ARGB cables from the fans to the ARGB splitter cable, then connect the splitter to a 3-pin 5V ARGB header on your motherboard.

4.2 Install the CPU Mounting Bracket

Select the appropriate mounting bracket for your CPU socket (Intel or AMD).

For Intel Sockets (LGA1700/1200/115X/2011/2066):

1. Install the Intel backplate behind your motherboard, aligning the holes with the CPU socket mounting holes.
2. Secure the standoffs through the motherboard and into the backplate.
3. Attach the Intel mounting arms to the pump block.

For AMD Sockets (AM5/AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1):

1. Remove the stock AMD retention clips from the motherboard, but keep the original backplate.
2. Secure the AMD standoffs directly into the original AMD backplate.
3. Attach the AMD mounting arms to the pump block.

4.3 Mount the Pump Block

Figure 4.2: Assembled Water Cooler

1. Clean the CPU surface with isopropyl alcohol to remove any old thermal paste or residue.
2. Apply a small pea-sized amount of the provided thermal paste to the center of your CPU's integrated heat spreader (IHS).
3. Carefully place the pump block onto the CPU, aligning the mounting holes with the standoffs.
4. Secure the pump block with the provided thumb screws, tightening them in a diagonal pattern until snug. Do not overtighten.

4.4 Mount the Radiator

Figure 4.3: Water Cooler Dimensions

1. Mount the radiator and attached fans to an available 240mm fan mount location in your PC case (e.g., top, front, or rear).
2. Use the longer radiator mounting screws to secure the radiator to the case.

4.5 Connecteu els cables

Figure 4.4: Pump and Fans with ARGB

1. Connect the pump's 3-pin power cable to a CPU_FAN or AIO_PUMP header on your motherboard. Ensure this header provides full power to the pump.
2. Connect the pump's ARGB cable to the same 3-pin 5V ARGB header as the fans, or to a separate ARGB header if available and desired for independent control.
3. Route all cables neatly to avoid interference with other components or airflow.

5. Instruccions de funcionament

Once installed, the Husky Glacier ARGB 240mm Water Cooler operates automatically to cool your CPU.

5.1 Engegada inicial

After completing the installation, power on your computer. The pump and fans should start spinning, and the ARGB lighting should illuminate. It is normal to hear some gurgling sounds initially as air bubbles are purged from the loop; this should subside within a few minutes of operation.

5.2 Visualització de la temperatura

Figure 5.1: Pump Temperature Display

The pump block features an integrated display that shows the current coolant temperature. This provides a direct indication of the cooling performance. The ARGB lighting around the display may also change color based on temperature, providing a visual cue.

5.3 ARGB Control

The ARGB lighting on the fans and pump can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). Ensure your motherboard's software is up-to-date to access all lighting effects and synchronization options.

6. Manteniment

Regular maintenance helps ensure optimal performance and longevity of your water cooler.

• Neteja de pols: Periodically inspect the radiator fins and fan blades for dust accumulation. Use compressed air or a soft brush to gently remove dust. Excessive dust can impede airflow and reduce cooling efficiency.
• Inspecció de tubs: Occasionally check the tubing for any signs of kinks, leaks, or damage. While the system is sealed, visual inspection is recommended.
• Funcionament del ventilador: Ensure both fans are spinning freely and quietly. If a fan becomes noisy or stops spinning, it may need replacement.
• Refrigerant: This is a closed-loop system and does not require coolant refills or maintenance. Do not attempt to open the pump or radiator.

7. Solució De Problemes

If you encounter issues with your water cooler, refer to the following common problems and solutions:

8. Especificacions

9. Garantia i Suport

9.1 Informació de la garantia

The Husky Glacier ARGB 240mm Water Cooler comes with a 1-year warranty, which includes 3 months of legal warranty and 9 months of contractual warranty. Please retain your proof of purchase for warranty claims.

9.2 Atenció al client

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Husky customer support. Refer to the official Husky website or your retailer's support channels for contact information.