ROCKBROS Bike Tail Light Max (Model Q1MAX) User Manual

1. Introducció

Thank you for choosing the ROCKBROS Bike Tail Light Max. This manual provides essential information for the proper installation, operation, and maintenance of your new bike tail light. Designed for enhanced visibility and safety, this light features smart brake sensing, multiple lighting modes, and a durable, waterproof construction. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

2. Què hi ha a la caixa

Verifiqueu que tots els components siguin presents al paquet:

• Bike Taillight (1 unit)
• Cable de càrrega USB (1 unitat)
• Saddle Mount (1 unit)
• Seatpost Strap Mount (1 unit)
• Straps (2 units)
• Cable Ties (4 units)

3. Configuració i instal·lació

The ROCKBROS Bike Tail Light Max offers versatile mounting options for both seatpost and saddle rail installation. No tools are required for installation.

3.1. Instal·lació de la tija del seient

1. Select the seatpost strap mount and two straps from the accessories.
2. Choose a suitable position on your bike's seatpost.
3. Secure the seatpost strap mount to the seatpost using the provided straps. Ensure it is tight and stable.
4. Align the tail light with the base, twist it in, and lock it into place until you hear a click.
5. Verify the light is securely attached and facing backward.

Image: Step-by-step guide for installing the tail light on a seatpost using the strap mount.

3.2. Instal·lació del rail del selló

1. Select the saddle mount and cable ties from the accessories.
2. Place the saddle-rail mount on top of your saddle rails.
3. Wrap the cable ties around the saddle rails and pull them tight to secure the bracket. Trim any excess cable tie length if needed.
4. Align the tail light with the base, twist it in, and lock it into place until you hear a click.
5. Verify the light is securely attached and facing backward.

Image: Step-by-step guide for installing the tail light on saddle rails using the saddle mount and cable ties.

3.3. Guia de vídeo d'instal·lació

4. Instruccions de funcionament

4.1. Encendre/apagar

Per encendre la llum on or apagat, press and hold the power button located on the front of the light for approximately 2 seconds.

4.2. Canviar els modes d'il·luminació

Un cop encès el llum, premeu breument el botó d'engegada per canviar pels 5 modes d'il·luminació disponibles:

• Red Normal Flash
• Red/Blue Alternating Flash
• Respiració de colors
• Dual Rapid Strobe
• Encès constant

Image: Illustration of the ROCKBROS Smart Tail Light showcasing its 7-color capability and 5 lighting modes.

4.3. Smart Brake Sensing (Max Exclusive)

The Max model features a smart brake sensing function. When deceleration is detected, the light will automatically switch to high brightness for 2.5 seconds to alert vehicles behind you. This feature enhances safety during sudden stops or braking.

Image: The bike tail light mounted on a bicycle, illustrating the 'Smart Brake Sensing' feature in action.

4.4. Auto Mode (Max Exclusive)

In Auto Mode, the built-in light and vibration sensors manage the light's operation automatically. The light will:

• Enter sleep mode after 30 seconds of stillness or under strong sunlight.
• Wake up automatically upon detecting vibration or low-light conditions (e.g., entering a tunnel, dusk).

This mode conserves battery life while ensuring you remain visible when needed.

4.5. Real-Time Battery Level Indicator

Four blue LED dots on the power button provide a clear indication of the remaining battery level, visible even in daylight. Each dot represents approximately 25% of the battery capacity:

• 4 punts: 75% - 100% de càrrega
• 3 punts: 50% - 75% de càrrega
• 2 punts: 25% - 50% de càrrega
• 1 dot: 0% - 25% de càrrega (recarregar aviat)

In auto mode, these indicators remain active, allowing you to monitor battery status without interruption.

Image: A visual representation of the battery indicator with four blue LED dots, showing charge levels from 0% to 100%.

5. Instruccions de càrrega

The ROCKBROS Bike Tail Light Max is equipped with a rechargeable 300mAh battery and a Type-C charging port.

1. Locate the Type-C charging port on the light.
2. Connect the provided USB charging cable to the light's Type-C port.
3. Connect the other end of the USB cable to a standard USB power source (e.g., computer, wall adapter, power bank).
4. The battery indicator LEDs will show charging progress. A full charge typically takes approximately 2 hours.
5. Un cop estigui completament carregat, desconnecteu el cable de càrrega.

Image: The bike tail light connected to a laptop via a Type-C USB cable, illustrating the charging process and battery indicator.

6. Manteniment i cura

6.1. Neteja

Wipe the light's surface with a soft, damp cloth to remove dirt and dust. Avoid using abrasive cleaners or solvents, as these can damage the finish or internal components.

6.2. Resistència a l'aigua

The light has an IPX5 water resistance rating, protecting it against rain, splashes, and dust. It is not designed for submersion. Avoid prolonged exposure to heavy rain or direct water jets.

Image: The bike tail light covered in water droplets, demonstrating its all-weather waterproof design.

6.3. Emmagatzematge

When not in use for extended periods, store the light in a cool, dry place. Ensure the battery is partially charged (around 50%) before storage to prolong its lifespan. Recharge every 3-6 months if stored for a long time.

6.4. Durabilitat

The light features a premium aluminum alloy construction, making it lightweight, scratch-resistant, and sturdy against drops and impacts.

7. Solució De Problemes

• La llum no s'encén: Ensure the battery is charged. Connect the light to a power source using the USB cable. If the issue persists, try resetting the light by holding the power button for 10 seconds.
• La llum no respon quan es prem un botó: The battery might be critically low or depleted. Charge the light. If fully charged, attempt a reset as described above.
• Smart Brake Sensing or Auto Mode not working: Ensure the light is securely mounted and not obstructed. Clean any dirt or debris from the sensors. Verify the light is in Auto Mode if you expect automatic operation.
• Autonomia curta de la bateria: Check the selected lighting mode; brighter or constantly-on modes consume more power. Ensure the light is fully charged before each use. Battery performance can decrease in extremely cold temperatures.

8. Especificacions

9. Informació de la garantia

This ROCKBROS Bike Tail Light Max (Model Q1MAX) comes with a 1 any de garantia del fabricant des de la data de compra. Aquesta garantia cobreix els defectes de materials i fabricació en condicions d'ús normal. No cobreix els danys causats per un mal ús, accidents, modificacions no autoritzades o desgast normal. Conserveu el comprovant de compra per a reclamacions de garantia.

10. Atenció al client

For any questions, technical assistance, or warranty claims regarding your ROCKBROS Bike Tail Light Max, please contact ROCKBROS customer support through the retailer where the product was purchased or visit the official ROCKBROS weblloc per obtenir informació de contacte.