Introducció
This manual provides essential information for the installation, operation, and maintenance of your KENT Smart Plus UV Water Purifier. Please read these instructions carefully before operating the appliance to ensure safe and efficient use. Keep this manual for future reference.
The KENT Smart Plus UV Water Purifier utilizes a multi-stage purification process including UV, UF, Alkaline, and Copper technologies to deliver pure and healthy drinking water. It is designed for use with tap and municipal water supplies with a Total Dissolved Solids (TDS) level up to 150 mg/L. This purifier is not suitable for borewell water.
Instruccions importants de seguretat
- Ensure the purifier is installed by a qualified technician.
- No feu servir l'aparell si el cable d'alimentació està danyat.
- Do not expose the purifier to direct sunlight or extreme temperatures.
- Only use genuine KENT spare parts for replacement to ensure optimal performance and warranty validity.
- Desconnecteu l'alimentació abans de realitzar qualsevol manteniment o neteja.
- Aquest aparell no està pensat per ser utilitzat per persones (inclosos nens) amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat.
- Els nens han de ser supervisats per assegurar-se que no juguin amb l'aparell.
Producte acabatview
The KENT Smart Plus UV Water Purifier is designed to provide safe and healthy drinking water through its advanced purification system.
Característiques principals:
- UV+UF+Alkaline+Copper Purification: Removes bacteria, viruses, cysts, and other impurities while enhancing water quality with alkaline and copper benefits.
- Funcionament totalment automàtic: Features like the UV Fail Alarm ensure continuous monitoring and safety.
- Alta capacitat de purificació: Fins a 60 litres per hora.
- Aigua alcalina: Helps maintain a pH level of 8.0+ for improved health benefits.
- Copper Infusion: Adds beneficial copper minerals to the purified water.
Purification Process:
The purifier employs a multi-stage purification process to ensure comprehensive water treatment.

- Filtre de sediments: Removes fine and coarse particulate impurities from water.
- UF Membrane: Ultra Filtration membrane effectively removes bacteria, cysts, and other microorganisms.
- Desinfecció UV: Ultraviolada lamp inactivates harmful bacteria and viruses.
- Post filtre de carbó: Further polishes the water, removing residual organic impurities and improving taste.
- Copper Filter: Infuses water with essential copper minerals.


Configuració i instal·lació
Professional installation is recommended for the KENT Smart Plus UV Water Purifier. Ensure the following conditions are met before installation:
- The purifier should be installed on a wall near a water source and a power outlet.
- Ensure sufficient space around the purifier for maintenance and filter replacement.
- The water supply pressure should be within the recommended range (consult a technician if unsure).
- The input water TDS should not exceed 150 mg/L. This purifier is not suitable for borewell water.
Passos d'instal·lació (resum):
- Mount the purifier securely on a wall using the provided mounting template and hardware.
- Connect the raw water inlet to the purifier's inlet port.
- Connect the purified water outlet to a faucet or storage tank.
- Assegureu-vos que totes les connexions estiguin ajustades per evitar fuites.
- Connecteu el cable d'alimentació a una presa de corrent estàndard.
- Open the water supply to the purifier.
- Allow the purifier to fill and flush for a few minutes before first use (refer to detailed instructions in the physical manual for specific flushing procedures).


Instruccions de funcionament
The KENT Smart Plus UV Water Purifier operates automatically once installed and connected to power and water supply.
- Encès: Switch on the main power supply to the purifier. The indicator lights will illuminate, signifying operation.
- Distribució d'aigua: Open the purified water faucet to dispense water. The purifier will automatically start purifying water as needed.
- UV Fail Alarm: The purifier is equipped with a UV Fail Alarm. If the UV lamp becomes inefficient or stops functioning, an audible alarm will sound, and an indicator light will illuminate. In such a case, contact customer service for UV lamp replacement. Do not consume water if the UV Fail Alarm is active.
- Apagat automàtic: The purifier will automatically stop purification when the internal storage tank is full or if the water supply is interrupted.
Manteniment
Regular maintenance is crucial for the optimal performance and longevity of your KENT Smart Plus UV Water Purifier.
Substitució del filtre:
- The Sediment Filter, UF Membrane, Post Carbon Filter, and Copper Filter have a limited lifespan and require periodic replacement.
- Replacement frequency depends on the quality of raw water and consumption volume. Typically, filters should be replaced every 6-12 months.
- La UV lamp also has a limited effective life and should be replaced annually or when the UV Fail Alarm activates.
- Always use genuine KENT replacement filters and UV lamps. Contact an authorized KENT service technician for filter and UV lamp substitució.
Neteja:
- Netegeu l'exterior del purificador amb un drap suau iamp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
- Assegureu-vos que el subministrament elèctric estigui desconnectat abans de netejar.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No purified water output. | No water supply, power off, clogged filters, or faulty components. | Check water supply valve. Ensure power is on. Contact service for filter inspection or component repair. |
| UV Fail Alarm active. | UV lamp is inefficient or faulty. | Contact an authorized service technician for UV lamp replacement. Do not consume water until fixed. |
| L'aigua té un gust o una olor inusuals. | Expired or clogged carbon filter, or contamination. | Contact service for filter replacement. Ensure proper flushing after filter changes. |
| Fuga d'aigua. | Loose connections or damaged components. | Immediately turn off water supply and power. Contact an authorized service technician. |
For issues not listed above, or if the suggested solutions do not resolve the problem, please contact KENT customer support.
Especificacions
| Marca | CIUTAT |
| Número de model | 111188B |
| Mètode de purificació | UV+UF+Alkaline+Copper |
| Dimensions del producte (L x A x A) | 15L x 24W x 40H centímetres |
| Pes de l'article | 4.72 quilos |
| Caudal màxim | 60 litres per hora |
| Suitable for TDS Level | Up to 150 mg/L (Tap/Municipal Water) |
| No apte per | Borewell Water |
| País d'origen | Índia |
| Components inclosos | Water Purifier Unit, User Manual |
Garantia i suport
For warranty information, please refer to the warranty card included with your product or visit the official KENT website. The manufacturer, KENT RO SYSTEMS LTD, provides support for this product.
For technical assistance, service requests, or to purchase genuine spare parts, please contact KENT customer care or visit their authorized service centers. Contact details can typically be found on the KENT weblloc web o a l'embalatge del producte.
Fabricant: KENT RO SYSTEMS LTD
Weblloc: www.kent.co.in (Exampl'enllaç, l'enllaç real pot variar)