Nexia Home Intelligence, an Ingersoll Rand brand, provides smart home automation solutions including Z-Wave sensors, controllers, and bridge systems for connected living.
Nexia Home Intelligence offers a comprehensive smart home automation ecosystem powered by Z-Wave technology. Originally a brand under Ingersoll Rand, Nexia connects various devices—including thermostats, door locks, sensors, and lighting—into a single, manageable network. Known for its compatibility with Trane and American Standard HVAC systems, the platform allows homeowners to monitor and control their environment remotely.
The product lineup includes the Nexia One Touch wall controller and various security sensors like the DB100Z Doorbell Sensor. These devices utilize Z-Wave wireless protocols to ensure reliable, meshed communication across the home. While the brand has evolved and is often associated with Trane Home today, legacy Nexia devices remain widely used for integrating home climate control and security.
Manuals més recents de manuals+ seleccionat per a aquesta marca.
Preguntes freqüents sobre manuals, registre i assistència per a aquesta marca.
To add (include) a device, set your primary Z-Wave controller to 'Include' mode and press the Install or physical button on the device as described in the specific product manual.
Use the Installer Setup menu: Press and hold the middle page button until the menu appears, select 'System', then 'Factory Reset', and confirm by selecting 'Yes'. Note that this clears all network settings.
For many sensors like the DB100Z, pressing the Install Button (sometimes triple-pressing depending on the model) will send a Wakeup Notification report and keep the device awake for a short period, typically 10 seconds.
Z-Wave is an international wireless protocol for smart homes that ensures reliable two-way communication. Nexia devices act as nodes in a meshed network, repeating signals to extend range.