1. Introducció
The Sinocare ARM-30E+ is an automatic arm blood pressure monitor designed for convenient and accurate measurement of blood pressure and pulse rate at home. This device features a large LCD display, dual user mode with extensive memory, and a comfortable long cuff suitable for various arm sizes. It is intended for general home use and provides essential health monitoring data.
2. Contingut del paquet
Si us plau, comproveu el paquet per veure si hi ha els elements següents:
- Blood Pressure Monitor (ARM-30E+)
- 22-42cm Long Cuff
- Manual d'usuari
Note: Batteries and USB cable are not included in the package.
3. Característiques del producte
- Mesura precisa: Provides reliable blood pressure and pulse readings.
- Mode d'usuari dual: Supports two users, each with 99 memory slots for storing readings.
- Long Cuff Design: Includes a 22-42cm cuff, suitable for a wide range of arm circumferences.
- Cuff Worn Detection: Helps ensure proper cuff placement for accurate readings.
- Detecció de batecs cardíacs irregulars: Alerts the user to potential irregular heartbeats.
- Funcionament amb un sol botó: Simplifies the measurement process for ease of use.
- Apagat automàtic: The device automatically turns off after 1 minute of inactivity to conserve battery life.
- Emmagatzematge de dades: Sí
- Funció de veu: This model does not include a voice function.
- Bluetooth: No
4. Configuració
- Font d'alimentació: Insert 4 AAA batteries into the battery compartment. Alternatively, connect the monitor using a micro USB 5-6V adapter (not included).
- Connecteu el maneguet: Unpack the cuff and securely connect its air tube to the air jack on the side of the blood pressure monitor.
- Posicionament: Sit upright in a chair with your feet flat on the floor. Ensure your arm is resting comfortably on a table, with the cuff at heart level.
- Aplicar el maneguet: Wrap the cuff around your upper arm, ensuring the bottom edge of the cuff is 0.8-1.2 inches (2-3 cm) above your elbow joint. The air tube should run down the center of your arm in line with your middle finger. The cuff should be snug but not too tight.
5. Funcionament
- Iniciar la mesura: With the cuff correctly applied and you in a relaxed position, press the INICI/PARA button. The cuff will automatically inflate, and the measurement will begin.
- Resultats de lectura: Once the measurement is complete, your Systolic (SYS), Diastolic (DIA) blood pressure, and Pulse (PUL) rate will be displayed on the LCD screen.
- Funció de memòria: A view previous readings, press the MEM button. You can cycle through stored measurements for both users.
- User Selection: If using dual user mode, ensure the correct user profile is selected before taking a measurement to store data accurately.
- Apagar: The device will automatically power off after 1 minute of inactivity. You can also manually turn it off by pressing the INICI/PARA botó.
6. Manteniment
- Neteja: Wipe the monitor and cuff with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Substitució de la bateria: Replace all batteries when the low battery indicator appears on the display. Remove batteries if the device will not be used for an extended period.
- Cura del maneguet: Ensure the cuff is not twisted or sharply bent during storage.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha pantalla/El dispositiu no s'encén | Low or dead batteries; Incorrect battery insertion; Power adapter issue. | Replace batteries; Check battery polarity; Ensure USB adapter is 5-6V and properly connected. |
| Missatge d'error a la pantalla | Improper cuff placement; Movement during measurement; Unstable pulse. | Re-apply cuff correctly; Remain still and silent during measurement; If errors persist due to unstable pulse, consult a healthcare professional or contact support. |
| Lectures inexactes | Incorrect cuff size or placement; Movement; Talking; Recent exercise/stress. | Ensure proper cuff fit and placement; Relax for 5 minutes before measurement; Avoid talking or moving; Take multiple readings and average them. |
| Screen goes blank after connecting USB | Possible internal fault or power issue. | Disconnect USB, remove and reinsert batteries. If issue persists, contact customer support. |
8. Especificacions
| Característica | Detall |
|---|---|
| Nom del producte | Monitor de pressió arterial del braç |
| Model | ARM-30E+ |
| Mostra | Pantalla LCD |
| Mètode de mesura | Mesura oscil·lomètrica |
| Part de mesura | Braç superior |
| Interval de mesura | SYS: 57-255 mmHg; DIA: 25-195 mmHg; Pulse rate: 40-199 bpm |
| Accuracy (Cuff Pressure) | ±3 mmHg (±0.4 kPa) |
| Precisió (freqüència de pols) | ±5% |
| Pes | Aprox. 220 g (sense piles) |
| Dimensions | 118 * 98 * 62.5 mm |
| Mida de la pantalla | 44.5 * 58.5 mm (2.9 inches) |
| Mida del puny | 22-42 cm (8.6-16.5 polzades) |
| Piles incloses | No |
| Emmagatzematge de dades | Sí |
| Bluetooth | No |
| Aplicació | Braç |
| Certificació | CE |
9. Consells d'usuari
- Precisió: Users report small discrepancies within 1.5-2%, indicating generally accurate readings.
- Durada de la bateria: Batteries can last for a long time, with some users reporting 4 months of daily use (2-3 times a day).
- Cuff Fit: The 22-42cm cuff is versatile and suitable for various arm sizes, including those up to 40cm circumference.
- Font d'alimentació: The device can be powered by 4x AAA batteries or a micro USB 5-6V adapter (e.g., a phone charger).
- Funció de so: While this model is stated to be without voice function, if you encounter a version with sound, some users have found that the sound can be disabled by pressing the left key for 5 seconds, then using the left/right keys to select 'SN ON' and changing it to 'SN OFF' with the right key.
10. Garantia i Suport
This Sinocare Blood Pressure Monitor comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the seller or Sinocare customer support directly.
