1. Introducció
The MicroZone E6R-E is a compact and lightweight 2.4GHz 6-channel stabilizer receiver designed for use with the MicroZone MC6C remote control transmitter. It features integrated self-stabilization on channels 1-3 and a switchable self-stabilization function on channel 5, making it ideal for various RC aircraft including airplanes, drones, and quadcopters. This manual provides essential information for proper setup, operation, and maintenance of your E6R-E receiver.
2. Producte acabatview
Familiarize yourself with the components and ports of your MicroZone E6R-E receiver.
3. Instruccions de configuració
3.1 Binding the Receiver to the Transmitter (MC6C)
The E6R-E receiver uses an 'electric shock frequency' mode, which refers to a specific binding procedure to link it with your MC6C transmitter. Follow these steps carefully:
- Ensure your MC6C transmitter is turned OFF.
- Connect a binding plug (often included with the receiver, see Figure 3) to the 'BIND' or 'B/VCC' port on the E6R-E receiver.
- Connect power to the receiver (e.g., from an ESC or a separate battery) through any other channel port (e.g., CH3 or CH4). The LED on the receiver should start flashing rapidly, indicating it is in binding mode.
- While holding down the 'BIND' button on your MC6C transmitter, turn the transmitter ON.
- Observe the LED on the receiver. It should stop flashing and remain solid, indicating a successful bind.
- Release the 'BIND' button on the transmitter, then turn OFF both the transmitter and the receiver.
- Remove the binding plug from the receiver.
- Turn on the transmitter first, then power on the receiver. The receiver LED should be solid, confirming the link.
3.2 Connecting to Your RC Model
Connect your servos, ESC, and other components to the appropriate channels on the receiver. The E6R-E provides 5 PWM signal channels:
- CH1-CH3: These channels feature integrated self-stabilization. Connect your aileron, elevator, and rudder servos here for automatic flight assistance.
- CH5: This channel acts as a self-stabilization switch. Connect a switch channel from your transmitter to CH5 to enable or disable the self-stabilization function during flight.
- Other Channels (e.g., CH4, CH6, CH7): Use these for throttle, flaps, landing gear, or other auxiliary functions as needed.
4. Instruccions de funcionament
4.1 Engegada i comprovacions prèvies al vol
- Always turn on your MC6C transmitter first.
- Then, power on your RC model (which powers the receiver). The receiver's LED should illuminate solid, indicating a stable connection.
- Perform a range check and verify all control surfaces (ailerons, elevator, rudder) and other functions respond correctly to transmitter inputs.
- Test the self-stabilization switch (CH5) to ensure it toggles the stabilization mode as expected.
4.2 Self-Stabilization Function
The E6R-E receiver's integrated self-stabilization on CH1-CH3 helps maintain stable flight, especially useful for beginners or in windy conditions. The CH5 switch allows you to activate or deactivate this feature during flight, giving you full control over your aircraft's behavior.
5. Manteniment
To ensure the longevity and reliable performance of your MicroZone E6R-E receiver, follow these maintenance guidelines:
- Mantenir sec: Protect the receiver from moisture and humidity. Water damage can lead to malfunctions.
- Eviteu danys físics: Mount the receiver securely within your model to prevent vibrations and impacts.
- Neteja: Keep the receiver free from dust, dirt, and debris. Use a soft, dry brush or compressed air for cleaning.
- Col·locació de l'antena: Ensure the antenna is positioned correctly and not damaged. A damaged or improperly routed antenna can significantly reduce range and signal quality.
- Voltage Comproveu: Regularly check your power source (battery) to ensure it provides the correct voltage within the receiver's specified range (DC3.5V-7.4V).
6. Solució De Problemes
If you encounter issues with your E6R-E receiver, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Receiver LED not solid after powering on. | Not bound to transmitter, or transmitter is off. | Ensure transmitter is ON. Re-perform the binding procedure (Section 3.1). |
| No hi ha resposta de control del model. | Receiver not powered, incorrect wiring, or binding issue. | Check power connections. Verify servo/ESC connections to correct channels. Re-bind receiver. |
| Unstable or erratic control. | Interference, low receiver voltage, or damaged antenna. | Check for sources of interference. Ensure battery voltage is adequate. Inspect antenna for damage and proper placement. |
| Self-stabilization not working or always on/off. | CH5 switch not configured or faulty. | Verify CH5 is connected to a switch channel on your transmitter and configured correctly. Check transmitter settings. |
7. Especificacions
| Característica | Especificació |
|---|---|
| Model | E6R-E |
| Dimensions (L x A x A) | 37 mm x 23 mm x 13 mm |
| Pes | 9g |
| Longitud de l'antena | 110 mm |
| Canals de sortida | 5 PWM (CH1-CH3 with self-stabilization, CH5 self-stabilization switch) |
| Freqüència de recepció | 2.401MHz - 2.479MHz (S-FHSS) |
| Voltage Rang | CC 3.5V - 7.4V |
| Mode de freqüència | Electric Shock Frequency (Binding Procedure) |
| Transmissor compatible | MicroZone MC6C |
| Material | Material compost |
| Edat recomanada | 12+ anys |
8. Consells d'usuari
- Orientació de l'antena: For optimal signal reception, try to position the receiver antenna away from large metal objects and at a 90-degree angle to any other antennas in your model.
- Muntatge segur: Use double-sided foam tape or Velcro to securely mount the receiver in your model, reducing vibration and protecting it from impacts.
- Font d'alimentació: Always ensure your power source (e.g., ESC's BEC or a dedicated receiver battery) can provide stable voltage and sufficient current for all connected servos and the receiver.
- Test Stabilization: Before flying, always test the self-stabilization function on the ground to understand its behavior and ensure it's configured to your preference.
9. Garantia i assistència
For warranty information, technical support, or service inquiries regarding your MicroZone E6R-E receiver, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
