Turbo Racing P30 91803G-VT 2.4G 3CH Radio Transmitter and RX41 Receiver Instruction Manual

1. Producte acabatview

The Turbo Racing P30 91803G-VT is a 2.4GHz 3-channel radio transmitter designed for controlling various remote-controlled vehicles such as cars, boats, trucks, and buggies. It features an ergonomic pistol-grip design, integrated antenna, and low battery warning. The included RX41 receiver is a compact, lightweight, and waterproof 4-channel unit.

Característiques del transmissor:

• Steering/Throttle Trim Adjustment
• Steering/Throttle Servo Reversing
• Steering/Throttle Dual-rate Adjustment
• LED On/Off Indicator
• Avís de bateria baixa
• Antena integrada
• Ergonomic Pistol-grip and Steering Wheel
• Removable handle for compact storage

Característiques del receptor:

• Compacte i lleuger
• 4 canals
• Disseny impermeable

2. Guia de configuració

2.1 Instal·lació de la bateria (transmissor)

1. Locate the battery compartment cover on the bottom of the transmitter handle.
2. Feu lliscar la coberta oberta.
3. Introduïu quatre (4) piles AAA, assegurant-vos de la polaritat correcta (+/-).
4. Tanqueu bé la tapa del compartiment de la bateria.

The transmitter requires 4 AAA batteries for operation.

Image: Transmitter with its battery compartment open, illustrating the insertion of four AAA batteries.

2.2 Connexió del receptor

The RX41 receiver is a 4-channel unit. Connect the receiver to your RC vehicle's Electronic Speed Controller (ESC) and servos according to your vehicle's specific wiring diagram. The receiver typically connects to the ESC via Channel 2 (throttle) and steering servo via Channel 1 (steering).

Image: The P30 transmitter alongside the RX41 receiver, highlighting the receiver's connection ports.

2.3 Vinculació del transmissor i del receptor

To establish communication between the transmitter and receiver, a binding process is required. Follow these general steps:

1. Assegureu-vos que tant l'emissor com el receptor estiguin apagats.
2. Connect a bind plug (usually included with your RC vehicle or receiver) to the 'BIND' port on the RX41 receiver.
3. Power on your RC vehicle (which powers the receiver). The receiver's LED should flash rapidly, indicating it's in bind mode.
4. While holding down the 'BIND' button on the transmitter (if available, otherwise refer to specific transmitter instructions), power on the transmitter.
5. Release the 'BIND' button on the transmitter once its LED indicates a successful bind (usually a solid light). The receiver's LED should also turn solid.
6. Power off both the receiver and transmitter.
7. Traieu el connector de connexió del receptor.
8. Power on the transmitter first, then the receiver. Test controls to confirm successful binding.

2.4 Handle Disassembly/Assembly

The transmitter features a removable handle for easier storage and transport.

1. To remove: Gently slide the handle downwards and away from the main body of the transmitter.
2. To attach: Align the handle with the grooves on the transmitter body and slide it upwards until it clicks securely into place.

Image: The P30 transmitter with its handle detached, demonstrating the modular design for compact storage.

3. Instruccions de funcionament

3.1 Controls bàsics

• Volant: Rotate left or right to control the vehicle's steering.
• Activador de l'accelerador: Pull the trigger towards you for forward movement/acceleration. Push the trigger away from you for braking/reverse.

Imatge: Una imatge detallada view of the transmitter's steering wheel and throttle trigger, indicating primary control points.

3.2 Transmissor acabatview i Ajustaments

The transmitter features several buttons and switches for fine-tuning control.

Imatge: De dalt a baix view of the transmitter's control panel, showing various buttons and their functions.

• ST.TRIM (Ajust de direcció): Adjusts the neutral position of the steering servo. Use to make the vehicle drive straight when the steering wheel is centered.
• TH.TRIM (Ajust de l'accelerador): Adjusts the neutral position of the throttle. Use to prevent the vehicle from creeping forward or backward when the throttle trigger is released.
• ST.REV (Direcció enrere): Reverses the direction of the steering servo. If the vehicle steers right when you turn the wheel left, use this to correct it.
• TH.REV (Marxa de l'accelerador enrere): Reverses the direction of the throttle servo. If the vehicle goes reverse when you pull the trigger for forward, use this to correct it.
• ST.D/R (direcció de doble velocitat): Adjusts the maximum steering angle. Lowering this value reduces the sensitivity of the steering.
• TH.D/R (Throttle Dual Rate): Adjusts the maximum throttle output. Lowering this value can limit top speed or acceleration.
• CH3 Button: Controls the third channel, typically used for auxiliary functions like lights, winches, or gear shifting, depending on your vehicle's setup.
• Indicador LED: Shows the power status and binding status of the transmitter.

3.3 Avís de bateria baixa

The transmitter is equipped with a low battery warning system. When the battery voltage drops below 4.5V, the LED indicator will typically flash or change color to alert you. Replace the AAA batteries promptly to ensure reliable operation and prevent loss of control.

4. Manteniment

4.1 Atenció general

• Mantingueu l'emissor i el receptor nets i lliures de pols, brutícia i humitat. Feu servir un drap suau i sec per netejar-los.
• Avoid exposing the components to extreme temperatures or direct sunlight for prolonged periods.
• No utilitzeu productes químics o dissolvents per a la neteja.

4.2 Cura de la bateria

• Always remove the AAA batteries from the transmitter when not in use for extended periods to prevent leakage and damage.
• Eliminar les bateries usades de manera responsable d'acord amb la normativa local.

4.3 Receiver Waterproofing

The RX41 receiver is designed to be waterproof, making it suitable for use in various conditions. While it can withstand splashes and light rain, avoid submerging it completely in water for extended periods unless your vehicle is specifically designed for such use and all other electronic components are also waterproofed.

Image: The RX41 receiver shown with water splashing, illustrating its waterproof capability.

4.4 Emmagatzematge

For compact storage and protection, the transmitter's handle can be detached. Store the transmitter and receiver in a dry, cool place, away from direct sunlight and extreme temperatures.

5. Solució De Problemes

• Sense energia:
  • Check if the transmitter's power switch is ON.
  • Ensure AAA batteries are correctly installed and not depleted. Replace if necessary.
  • Verify the receiver is properly connected to the vehicle's power source and the vehicle's power is ON.
• Loss of Control/No Signal:
  • Re-bind the transmitter and receiver (refer to Section 2.3).
  • Ensure the transmitter and receiver are within the specified operating range (120m).
  • Check for potential interference from other 2.4GHz devices or large metal objects.
  • Inspect all wiring connections between the receiver, ESC, and servos.
• Vehicle Not Driving Straight/Controls Unresponsive:
  • Adjust Steering Trim (ST.TRIM) to center the steering.
  • Adjust Throttle Trim (TH.TRIM) to ensure the vehicle is stationary at neutral throttle.
  • Check Steering/Throttle Reverse (ST.REV/TH.REV) settings if controls are operating in the opposite direction.
  • Verify Dual Rate (ST.D/R, TH.D/R) settings are not set too low, limiting control throw.
• Avís de bateria baixa:
  • Replace the four (4) AAA batteries in the transmitter immediately.

6. Especificacions

7. Consells d'usuari

• Aplicació versàtil: This radio system is highly versatile and can be effectively used for a wide range of RC vehicles, including cars, trucks, buggies, and boats.
• Emmagatzematge compacte: Utilize the removable handle feature to make the transmitter more compact for travel and storage, protecting it from potential damage.
• Protecció del receptor: While the RX41 receiver is waterproof, always ensure it is installed in a location that minimizes direct exposure to excessive moisture or impacts, especially in non-waterproof vehicles.

8. Garantia i Suport

For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.