1. Introducció
The Electronic Watch DT-6507 is a versatile mirror LED alarm clock designed for desktop use. It features a bright green LED display, automatic temperature measurement, and an automatic brightness reduction function for nighttime viewing. This manual provides instructions for setting up, operating, and maintaining your DT-6507 electronic watch.
2. Contingut del paquet
- Electronic Watch DT-6507 (with green digits)
- USB-A power cable (adapter sold separately)
- Peu de muntatge
- Manual d'usuari (aquest document)
3. Configuració
3.1 Alimentació del dispositiu
The DT-6507 can be powered in two ways:
- Potència USB: Connect the provided USB-A cable to the DC input port on the back of the clock. Plug the other end into a compatible USB power adapter (not included) and then into a wall outlet.
- Còpia de seguretat de la bateria: For memory function and to prevent time settings from being lost during power outages, install 3 AAA batteries (not included) into the battery compartment on the back of the clock. Note: Batteries alone will not power the main display continuously; they primarily serve as backup for settings.
Figura 3.1: posterior view with power input and battery compartment.
3.2 Placing the Clock
Attach the included mounting foot to the bottom of the clock for stable desktop placement. Ensure the clock is placed on a flat, stable surface.
Figura 3.2: Frontal view of the DT-6507 clock.
4. Instruccions de funcionament
4.1 botons de control
The clock features five function buttons located on the top:
- Mode: Used to switch between display modes and enter setting modes.
- ALARMA: Used to set and activate/deactivate the alarm.
- SNZ/LIGHT: Used for snooze function during an alarm and to adjust display brightness.
- AMUNT: Used to increase values during setting or navigate menus.
- BAIX: Used to decrease values during setting or navigate menus.
Figura 4.1: superior view amb botons de control.
4.2 Modes de visualització
The clock automatically cycles through different display modes:
- Visualització de l'hora: Shows hours and minutes for 10 seconds.
- Visualització de la data: Shows month and day for 2 seconds.
- Visualització de la temperatura: Shows the current temperature for 2 seconds.
The cycle then repeats starting with the Time Display.
4.3 Configuració de l'hora i la data
Premeu el botó MODE per entrar al mode de configuració de l'hora. Feu servir el botó UP i ABAIX buttons to adjust the hours and minutes. Press MODE again to confirm and move to the next setting (e.g., 12/24 hour format, date).
4.4 Configuració de l'alarma
Premeu el botó ALARMA per entrar al mode de configuració de l'alarma. Feu servir el botó UP i ABAIX buttons to set the desired alarm time. Press ALARMA again to activate or deactivate the alarm. An 'AL' indicator will appear on the display when the alarm is active.
Figure 4.2: Display showing 'OFF' when alarm is deactivated.
4.5 Ajust de brillantor
The clock features an automatic brightness reduction function at night for comfortable viewing. You can also manually adjust the brightness using the SNZ / LIGHT botó.
5. Manteniment
To ensure the longevity and optimal performance of your DT-6507 electronic watch:
- Neteja: Wipe the mirror display and plastic case with a soft, dry cloth. Avoid abrasive cleaners or solvents that may damage the surface.
- Medi ambient: Mantingueu el rellotge allunyat de la llum solar directa, de temperatures extremes i d'alta humitat.
- Substitució de la bateria: Replace the AAA backup batteries periodically (e.g., once a year) to ensure settings are retained during power interruptions.
6. Solució De Problemes
6.1 Time Resets After Power Loss
If the time and settings reset every time the clock is disconnected from power, ensure that 3 AAA backup batteries are correctly installed in the battery compartment. These batteries are crucial for retaining settings when the main USB power is interrupted.
6.2 La pantalla no funciona
Check if the USB power cable is securely connected to both the clock and the power adapter, and that the adapter is plugged into a working electrical outlet.
7. Especificacions
| Característica | Descripció |
|---|---|
| Mostra | Hour, Minutes, Date, Temperature (Green LED) |
| Modes de visualització | Time (10s), Date (2s), Temperature (2s) auto-cycle |
| Brillantor | Automatic reduction at night |
| Format horari | 12/24 hores |
| Tipus de mecanisme | Electrònica |
| Interval de temperatura | 0 °C a +50 °C |
| Material de la caixa | Plàstic |
| Forma del cos | Rectangular-semicircle |
| Tipus | Escriptori |
| Mida de la figura | 5 cm |
| Dimensions totals (HxWxD) | 170 x 74 x 30 mm |
| Poder | USB-A cable (adapter sold separately), 3 x AAA batteries (backup) |
| Color del cos | Blanc |
| Color de la pantalla | Green (LED backlight) |
8. Consells d'usuari
- For continuous display and alarm functionality, always ensure the clock is connected to a USB power source.
- Install fresh AAA batteries for the memory function to avoid re-setting the time and alarm after power interruptions.
- The mirror surface can be used for quick checks, but remember it's primarily a clock display.
9. Garantia i Suport
Specific warranty information for this product is not provided in the available documentation. For any questions, technical support, or warranty inquiries, please contact the seller or retailer from whom you purchased the product.
