Miboxer Zigbee 3.0 LED Strip Controller User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Miboxer Zigbee 3.0 LED Strip Controller. These controllers are designed for various LED strip types, including Single Color, Dual White, RGB, RGBW, and RGB+CCT, offering versatile lighting control through Zigbee 3.0, 2.4G RF remote, and smartphone app (via a Zigbee gateway).

Imatge: Més deview of MiBoxer Zigbee 3.0 LED Strip Controllers and the ZB-Box Gateway.

2. Informació de seguretat

• Assegureu-vos que l'entrada voltage (DC12V-24V) matches your LED strip and power supply specifications.
• Do not exceed the maximum total output current of 12A.
• Installation should be performed by a qualified professional if you are unsure about electrical wiring.
• Avoid exposing the device to moisture or extreme temperatures outside the working range (-10~40°C).
• Disconnect power before making any electrical connections or performing maintenance.

3. Contingut del paquet

Depending on the model purchased, your package may include:

• Miboxer Zigbee 3.0 LED Strip Controller (FUT035Z+, FUT037Z+, etc.)
• ZB-Box1 or ZB-Box2 Zigbee 3.0 Gateway (if purchased)
• Manual d'usuari (aquest document)

4. Especificacions

5. Configuració

5.1 Esquemes de cablejat

Ensure power is disconnected before making any wiring connections. Connect your LED strip and power supply according to the specific controller model and LED strip type.

Image: Wiring diagram for FUT035Z+ (2-in-1) controller, supporting Single Color and Color Temperature LED strips.

Image: Wiring diagram for FUT037Z+ (3-in-1) controller, supporting RGB, RGBW, and RGB+CCT LED strips.

Refer to the detailed wiring diagrams on the product packaging or the comprehensive infographic for specific terminal connections (V+, V-, R, G, B, W, C, M).

5.2 Emparellament inicial

The controllers support both Zigbee 3.0 network pairing and 2.4G RF remote control pairing.

5.2.1 Zigbee Network Pairing (via Zigbee 3.0 Gateway)

1. Ensure your Zigbee 3.0 gateway (e.g., ZB-Box1, ZB-Box2) is powered on and configured.
2. Power on the LED strip controller.
3. Press the "SET" button on the controller 3 times continuously. The LED indicator on the controller will flash to confirm pairing mode.
4. Initiate the device search/pairing process on your Zigbee 3.0 gateway or compatible app (e.g., Tuya Smart).
5. Once successfully paired, the LED indicator will stop flashing.

To unpair from the Zigbee network, press the "SET" button on the controller 5 times continuously.

5.2.2 2.4G RF Remote Control Pairing

1. Ensure your 2.4G RF remote control is ready for pairing.
2. Power on the LED strip controller.
3. Within 3 seconds of powering on the controller, press the "SET" button on the controller 3 times. The LED indicator will flash to confirm pairing mode.
4. On your 2.4G RF remote, select the desired zone and press the "ON" button for that zone.
5. The LED strip will flash to confirm successful pairing.

To unpair from a 2.4G RF remote, within 3 seconds of powering on the controller, press the "SET" button on the controller 5 times. The LED strip will flash to confirm unpairing.

Image: Controller showing SET button for pairing/unpairing.

6. Instruccions de funcionament

6.1 App Control (via Zigbee 3.0 Gateway)

To use app control, you need a Miboxer Zigbee 3.0 gateway (ZB-Box1 or ZB-Box2) and the Tuya Smart app installed on your smartphone.

1. Ensure your controller is paired to the Zigbee 3.0 gateway (refer to section 5.2.1).
2. Open the Tuya Smart app and add the controller as a device if it hasn't been automatically discovered.
3. Use the app interface to adjust color, brightness, color temperature, and other settings of your LED strip.

Imatge: Example of smartphone app interface for color control.

6.2 Remote Control (2.4G RF)

If you have paired a 2.4G RF remote control (refer to section 5.2.2), you can use it to control your LED strip.

• Use the remote's buttons to turn the lights on/off, adjust brightness, change color, or select modes.
• Assegureu-vos que el comandament a distància estigui dins d'un radi de 30 m.

6.3 Control de veu

With a Zigbee 3.0 gateway and integration with smart home platforms like Amazon Alexa or Google Assistant, you can control your LED strip using voice commands.

1. Ensure your controller is paired to the Zigbee 3.0 gateway and linked to your smart home assistant account via the Tuya Smart app.
2. Use voice commands such as "Alexa, turn on the living room lights" or "Hey Google, set the bedroom lights to blue."

6.4 Funcions de temporització

The Tuya Smart app allows you to set schedules and timers for your LED strip controller.

1. In the Tuya Smart app, navigate to the controller's settings.
2. Set desired ON/OFF times, color changes, or brightness adjustments based on your daily routine.

Image: Smartphone app displaying timing schedule settings.

7. Manteniment

• Keep the controller clean and free from dust. Use a dry, soft cloth for cleaning.
• No utilitzeu productes químics ni productes de neteja abrasius.
• Ensure proper ventilation around the controller to prevent overheating.
• Reviseu regularment les connexions del cablejat per detectar qualsevol signe de desgast o soltesa.

8. Solució De Problemes

9. Consells d'usuari

• **SmartLife Compatibility**: The Miboxer Zigbee 3.0 controllers are compatible with the Tuya SmartLife app when used with a Zigbee 3.0 gateway. Ensure your gateway is properly configured within the SmartLife ecosystem.
• For optimal Zigbee performance, ensure your gateway is centrally located and not obstructed by large metal objects.
• When pairing, keep the controller close to the gateway or remote for the initial setup.

10. Garantia i Suport

This product comes with a 2-year warranty from the date of purchase, covering manufacturing defects. For technical support or warranty claims, please contact your retailer or the manufacturer directly.

Si us plau, conserveu el comprovant de compra per motius de garantia.