Manual d'usuari de l'estació de soldadura intel·ligent Aixun T3A

1. Producte acabatview

The AiXun T3A 200W Full Intelligent Soldering Station is the world's first 200W full intelligent soldering station, designed for precision electronics repair, PCB assembly, and professional soldering tasks. It combines ultra-fast heating, smart temperature control, and multi-platform compatibility to meet the demands of mobile maintenance, electrical repair, and production line use. It features a 2.4-inch color OLED display and supports T12, T245, and 936 series handles.

2. Característiques clau

• 200 W d'alta potència: High-efficiency heating, fast temperature recovery, no long preheating required.
• Remote PC Upgrade: Firmware updates via computer for ongoing performance optimization.
• 2.4-inch Large Screen Display: Color OLED screen shows real-time temperature, set value, power, and system status.
• Real-Time Dormancy Induction: Automatically enters low-power sleep mode when the iron is idle, saving energy and extending tip life.
• Rapid Temperature Rise: Ultra-fast heating (4-6 seconds for most handles) with precise temperature control.
• Smart Chip: Intelligent temperature regulation to maintain stable heat during continuous work.
• Memòria de temperatura: Saves custom temperature settings for quick recall.
• Hand Wheel Control: Smooth rotary knob for precise temperature adjustment.
• Alloy Shell: Durable, anti-static aluminum alloy housing for professional use.
• Multi-Handle Support: Supports 936, T12, T245 three handles, with automatic identification of handle model and working state.
• Environmental Temperature Sensor: Built-in sensor to avoid high-temperature operation.
• Working Time Record: Automatic record of working time, with an automatic reminder for fatigue operation.
• DC Power Supply & Burning Function: Maximum support of 24V-8A current output.
• Anti-static Isolation: Ultra-strong anti-static isolation design, meeting industrial ESD standards.

3. Especificacions

4. Contingut del paquet

• 1 × AiXun T3A Soldering Station Main Unit
• 1 × Soldering Iron Stand (with cleaning sponge)
• 1 × Selected Handle (T12 / T245 / 936, as per your choice)
• 3 × Replacement Tips (Knife, S, I Sharp)
• 1 × cable d'alimentació
• 1 × USB Cable (for PC upgrades)
• 1 × User Manual (PDF available online)

5. Configuració

5.1 Configuració inicial

1. Desempaquetar i inspeccionar: Comproveu que tots els components estiguin presents i sense danys.
2. Install the Tip:
   • Insert the desired tip into the handle.
   • Tighten the tip by rotating clockwise (right) to lock it in place.
   • To remove, rotate counterclockwise (left) gently and pull the tip out.
3. Muntar el suport: Place the cleaning sponge in the tray and dampen it with water (do not soak).
4. Connectar components:
   • Plug the handle into the main unit's interface.
   • Connect the power cord to the station and a grounded outlet.

6. Instruccions de funcionament

6.1 Power On & Operation

1. Encès: The OLED screen will light up, displaying the default temperature and system status.
2. Ajustar la temperatura:
   • Use the rotary knob to increase/decrease the set temperature.
   • Premeu el botó SET button to confirm settings; press CH to switch between saved profiles.
3. Estanyant la punta: Once the tip reaches 200°C+, apply solder wire to form a uniform tin coating (prevents oxidation and improves heat transfer).
4. Soldadura:
   • Touch the tip to the component/pad, then feed solder wire into the joint (not directly onto the tip).
   • For large joints (Knife Tip): Use the flat blade to heat multiple points simultaneously.
   • For micro work (Sharp Tip): Target small pads or jump wires with precision.

6.2 Dormancy & Shutdown

• The station will automatically enter dormancy mode when the handle is idle, reducing the tip temperature to prevent overheating.
• Before powering off, tin the tip to protect it from oxidation, then place it in the stand and unplug the station.

7. Manteniment

7.1 Precaucions de seguretat

• The tip and handle reach high temperatures during use. Do not touch them with bare skin.
• Keep the station away from flammable materials and use in a well-ventilated area to avoid inhaling solder fumes.
• Use the included anti-static measures when working with sensitive electronics.
• Never leave the station powered on and unattended.

7.2 Consells de manteniment

1. Cura de les puntes:
   • Clean the tip on the brass cleaner or damp sponge between uses to remove excess solder.
   • Re-tin the tip before storage to prevent oxidation. If oxidized, gently clean with fine sandpaper and re-tin immediately.
2. Cura del mànec:
   • The T12/T245 handles feature anti-scald silicone sleeves for safety. Avoid exposing them to sharp objects.
   • The built-in silicone ring in the handle prevents tip shaking; check it regularly for wear.

8. Solució De Problemes

9. Consells d'usuari

• For optimal performance and tip compatibility, ensure you select the correct handle type (T12, T245, or 936) for your specific soldering needs.
• The T245 handle, when used with the appropriate tips, is compatible with JBC 245 tips, offering flexibility for users with existing JBC tip collections.
• Regularly update the station's firmware via PC connection to benefit from the latest features and performance optimizations.

10. Garantia i assistència

The Aixun T3A Soldering Station comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the official product documentation or contact your retailer. For technical support, firmware updates, and additional resources, please visit the official Aixun platform or the website mentioned in the manual for PC upgrades.

A comprehensive user manual in PDF format is available for download. Reference: Aixun T3A User Manual (PDF)