1. Introducció
The ANERN AN-MSC-60A MPPT Solar Charge Controller is an advanced multi-level Maximum Power Point Tracking (MPPT) photovoltaic battery charge controller. Designed for optimal energy harvesting, it significantly improves charging efficiency compared to traditional PWM controllers, increasing the output power of your solar panel system by 5%-30%. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your solar charge controller.
2. Especificacions del producte
| Característica | Especificació |
|---|---|
| Model | AN-MSC-60A |
| Corrent de càrrega nominal | 60A |
| Max Open Voltage del panell solar | 150 V |
| Voltage (Auto) | 12V/24V/36V/48V |
| Max Input Power (12V System) | 780W |
| Max Input Power (24V System) | 1560W |
| Max Input Power (36V System) | 2360W |
| Max Input Power (48V System) | 3120W |
| Corrent nominal de descàrrega | 30A |
| Pèrdua estàtica | ≤50mA |
| HVD (High Voltage Desconnectar) | Bateria de plom-àcid de 16V |
| Control de llum Voltage | 5V/10V |
| Humitat de treball | ≤90%, sense condensació |
| Classe de protecció | IP30 |
| Grounded Type | Positive Grounded |
| Aperture for Installation | Φ5 mm |
| Coeficient de compensació de temperatura | -4mV/℃/2V (25℃) |
| Discharge Loop Voltage Gota | ≤0.2V |
| LCD Temperature Range | -20 ℃ ~ +70 ℃ |
| Interval de temperatura de funcionament | -20 ℃ ~ +55 ℃ |
| Interval de temperatura d'emmagatzematge | -30 ℃ ~ +80 ℃ |
| Tipus de bateries compatibles | User default, Sealed, Flooded, GEL, LiFePo4, Li(NiCoMn)O2 |
| Volum de càrrega igualattage | Maintenance-free lead-acid: 14.6V (2h); Flooded: 14.8V (2h); GEL: No |
| Vol. de càrrega d'absorciótage | Maintenance-free lead-acid: 14.4V (2h); Flooded: 14.6V (2h); GEL: No |
| LVR (Vol. baixtage Reconnect) | Lead-acid (Maintenance-free, GEL, Flooded): 12.6V |
| LVD (Vol. baixtage Desconnectar) | Lead-acid (Maintenance-free, GEL, Flooded): 10.8V |
3. Configuració i instal·lació
3.1 Instal·lació física
The controller features a die-cast aluminum structure for efficient heat dissipation, ensuring continuous and stable charging. Mount the controller in a well-ventilated area, away from direct sunlight and moisture. Ensure there is sufficient space around the unit for air circulation.
3.2 Esquema de cablejat
Follow the wiring diagram carefully to ensure correct and safe connection of your solar system components. Incorrect wiring can damage the controller or other components.
Figure 1: Wiring Diagram for the ANERN AN-MSC-60A MPPT Solar Charge Controller.
3.3 Connection Order
- Connect the battery to the charge controller first. Ensure correct polarity.
- Connect the solar panel (PV array) to the charge controller. Ensure correct polarity.
- Connect the load to the charge controller. Ensure correct polarity.
Always disconnect in the reverse order: Load -> Solar Panel -> Battery.
4. Instruccions de funcionament
4.1 Descripció de la interfície
The controller features an intuitive display and buttons for easy operation. Refer to the image below for an overview of the interface and button functions.
Figure 2: Controller Interface and Button Functions.
| Item | Icona | Estat |
|---|---|---|
| Matriu fotovoltaica | ☀️ / 🌙 | Dia / Nit |
| Carregant | ➡️ MPPT ➡️ | Estat de càrrega |
| Bateria | 🔋 | Uncharged / Battery capacity |
| Tipus de bateria | LiPo / Life | Tipus de bateria seleccionat |
| Carrega | 💡 | Load on / Load off |
| Botó MENÚ | ◀️ | Short press to switch down, press and hold for 3 seconds to enter the next interface. |
| Botó SET | ▶️ | Short press to switch up, press and hold for 3 seconds to exit without saving. |
4.2 Load Operating Modes
The controller offers four distinct load operating modes. The default setting is continuous load operation (24 hours). You can select the appropriate mode based on your application needs.
Figure 3: Four Load Operating Modes.
- LD1 (Regular Mode): The load operates normally and can be turned on or off manually.
- LD2 (Light Control Mode): The load automatically turns on at dusk and off at dawn.
- LD3 (Light & Time Control Mode): The load turns on at dusk and operates for a set number of hours, then turns off. It automatically identifies dark and light conditions based on the local environment.
- LD4 (Reverse Light Control Mode): The load automatically turns on at dawn and off at dusk.
4.3 Configuració del tipus de bateria
The controller supports various battery types including User default, Sealed, Flooded, GEL, LiFePo4, and Li(NiCoMn)O2. Ensure the correct battery type is selected in the controller settings to optimize charging and prevent damage to your battery. Refer to the specifications table for specific voltage paràmetres per a cada tipus de bateria.
5. Funcions de protecció
The ANERN AN-MSC-60A controller is equipped with multiple protection features to ensure the safety and longevity of your solar system.
Figure 4: Protection Functions.
- Solar Panel Reversed: Protection against reverse connection of the solar panel if the battery is not connected.
- Battery Reversed: Protection against reverse connection of the battery if the PV is unconnected.
- Sobrevol de bateriatage: Prevents battery damage when voltage arriba al sobrevoltage punt.
- Battery Over-Discharge: Prevents battery damage when voltage cau per sota del sub-voltage punt.
- Over-Load: Protects the system if the load current exceeds the rated current.
6. Manteniment
Regular maintenance helps ensure the optimal performance and longevity of your solar charge controller.
- Neteja: Mantingueu el controlador net i lliure de pols i brutícia. Feu servir un drap sec per netejar-lo.
- Connexions: Periodically check all wiring connections for tightness and corrosion. Loose connections can lead to power loss or overheating.
- Ventilació: Ensure the installation area remains well-ventilated to facilitate proper heat dissipation from the controller's aluminum back cover.
- Control ambiental: Verifiqueu que l'entorn de funcionament estigui dins dels rangs de temperatura i humitat especificats.
7. Solució De Problemes
Si teniu problemes amb el controlador de càrrega solar, consulteu els següents problemes i solucions habituals:
- Controller Not Functioning / No Display:
- Check battery connections: Ensure the battery is properly connected and has sufficient voltage. The controller requires battery power to operate.
- Verify wiring: Double-check all wiring according to the diagram, paying close attention to polarity.
- Inspect fuses/breakers: Ensure any inline fuses or circuit breakers in the system are not tripped or blown.
- Sense càrrega de panells solars:
- Check solar panel connections: Ensure PV array is correctly connected to the controller with proper polarity.
- Verify solar panel output: Measure the voltage and current of your solar panels to ensure they are producing power.
- Sunlight conditions: Ensure adequate sunlight is reaching the solar panels.
- La càrrega no funciona:
- Check load connections: Ensure the load is correctly wired to the controller.
- Verify load mode: Confirm the selected load operating mode (e.g., LD1, LD2) is appropriate for your needs.
- Bateria voltage: Si la bateria voltage is too low (below LVD), the controller will disconnect the load to protect the battery.
- Overload protection: If the load current exceeds the controller's rated discharge current, the overload protection may activate. Reduce the load.
8. Consells d'usuari
- Always connect the battery first and disconnect it last to prevent damage to the controller.
- Ensure your battery type is correctly configured in the controller settings for optimal charging and battery lifespan.
- If the controller appears non-functional, always start by checking all cable connections and the battery's state of charge.
9. Garantia i Suport
Per obtenir informació sobre la garantia, assistència tècnica o consultes sobre el servei, poseu-vos en contacte amb el punt de compra original o directament amb el fabricant. Conserveu el rebut de compra com a comprovant de compra.
10. Producte acabatview Vídeo
Mireu aquest vídeo per obtenir una visió generalview of the ANERN MPPT Solar Charge Controller.
Video: ANERN MPPT Solar Inverter Product Overview.
