1. Introducció
This manual provides instructions for the Scimagic-RC RMC-555/555S Fixed Code Remote Control Duplicator. This device is designed to copy existing fixed code remote controls operating within the 220MHz to 500MHz frequency range, commonly used for garage door openers and other access control systems. It is a replacement remote that can be programmed using a master copy machine like the Remocon 888 or by direct duplication from an original remote.
Video: Scimagic-RC RMC-555/555S Remote Control Duplicator in use.
2. Contingut del paquet
Si us plau, comproveu el paquet per veure si hi ha els elements següents:
- 1x Scimagic-RC RMC-555/555S Remote Control Duplicator
- 1x Battery (pre-installed or included separately)
- 1x clauer
3. Especificacions
| Característica | Detall |
|---|---|
| Nom de marca | Scimagic-RC |
| Número de model | RMC-555 |
| Mètode de codificació | Codi fix |
| Interval de freqüència | 220 MHz - 500 MHz (Adjustable) |
| Nombre de botons | 4 |
| Marques compatibles | Remocon RMC-555, Remocon |
| Dimensions (L x A x A) | 50 mm x 35 mm x 13 mm |
| Certificació | CE |
| Origen | Xina continental |
4. Configuració i programació
The RMC-555/555S duplicator can copy fixed code remotes. Please ensure your original remote is a fixed code type and operates within the supported frequency range (220-500MHz).
4.1 Clearing Existing Code
- Press and hold the two top buttons (A and B) simultaneously on the duplicator remote until the LED flashes rapidly (about 3 seconds).
- While still holding one of the top buttons, release the other.
- Press the released button 3 times. The LED should flash rapidly, indicating the code has been cleared.
- Release all buttons. The LED should not light up when any button is pressed, confirming the memory is empty.
Imatge: Superior view of the Scimagic-RC RMC-555/555S remote control.
4.2 Duplicating a Remote Control
- After clearing the code (as per section 4.1), place the original remote control and the RMC-555/555S duplicator side-by-side, as close as possible.
- Press and hold the button on your original remote that you wish to copy.
- Simultaneously, press and hold the corresponding button on the RMC-555/555S duplicator where you want to store the code.
- Keep both buttons pressed. The LED on the duplicator will first flash slowly, then rapidly, indicating successful duplication.
- Deixeu anar els dos botons.
- Test the copied button. If the LED lights up steadily when pressed, the code has been copied successfully.
- Repeat steps 2-6 for any other buttons you wish to copy.
Nota: For some remotes, it may be necessary to place the duplicator directly against the original remote or at a slightly different angle for successful copying. If direct duplication fails, programming might require a specialized master copy machine like the Remocon 888.
Imatge: Frontal view of the Scimagic-RC RMC-555/555S remote control with keychain.
5. Funcionament
Once programmed, the RMC-555/555S operates like your original remote control.
- Single Button Function: Press the desired button to activate the corresponding function (e.g., open/close garage door). The green LED will light up during transmission.
- Funcions múltiples: The 4 different shaped buttons can support up to 10 different functions by pressing various button combinations, depending on how your original remote was programmed and copied. Refer to your original remote's manual for specific combination functions if applicable.
Imatge: Anglesa view of the Scimagic-RC RMC-555/555S remote control.
6. Manteniment
6.1 Substitució de la bateria
When the remote's range decreases significantly or the LED indicator becomes dim or fails to light up, it's time to replace the battery.
- Localitza el cargol petit a la part posterior del comandament a distància.
- Carefully unscrew it to open the casing.
- Tingueu en compte el tipus i l'orientació de la bateria existent.
- Traieu la pila antiga i inseriu-ne una de nova del mateix tipus, assegurant-vos de la polaritat correcta.
- Tanca el casing and secure it with the screw.
Imatge: Enrere view of the remote control, showing the screw for battery access.
6.2 Atenció general
- Mantingueu el comandament a distància sec i allunyat de temperatures extremes.
- Eviteu deixar caure el comandament a distància ni sotmetre'l a impactes forts.
- Netegeu el comandament a distància amb un drap suau i sec. No utilitzeu productes químics agressius ni dissolvents.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El comandament a distància no funciona després de la programació. | Code not copied correctly; incompatible remote type; low battery. | Ensure original remote is fixed code. Re-attempt programming, ensuring close proximity. Check battery. |
| LED does not light up when button is pressed. | Battery is dead or incorrectly installed; remote memory is cleared. | Replace battery. If memory was cleared, re-program the remote. |
| Rang de funcionament reduït. | Bateria baixa; interferències; obstrucció. | Replace battery. Ensure clear line of sight to receiver. |
| Cannot clear existing code. | Seqüència de botons incorrecta. | Follow the 'Clearing Existing Code' steps carefully. |
8. Consells d'usuari
- Configuració: If you encounter difficulties configuring the remote via direct duplication, consider using a professional remote master copy machine like the Remocon 888, as this remote is specifically designed for compatibility with such devices.
- Concordança de freqüència: Always verify that the frequency of your original remote falls within the 220MHz to 500MHz range supported by this duplicator for successful copying.
- Button Combinations: Experiment with different button combinations if your original remote had multi-function capabilities, as this duplicator supports up to 10 functions.
9. Garantia i Suport
For any issues or questions regarding your Scimagic-RC RMC-555/555S remote control duplicator, please contact the seller or manufacturer for support. Keep your purchase receipt as proof of purchase for any warranty claims.
