1. Introducció
The LASER TREE Blue Laser Module is a professional laser head designed for use with CNC milling machines. Featuring a 450nm wavelength, it is an efficient and versatile tool for both laser engraving and laser cutting applications. This module is capable of processing a wide variety of materials, offering high speed and stability for precision work.
Característiques principals:
- Professional Laser Head: Engineered for high speed and stability.
- Blue-Violet Light: Provides clear visibility for precise locating during engraving.
- Muntatge fàcil: Features multiple mounting holes for straightforward integration into various machines.
- Enfocament ajustable: Allows for easy and flexible adjustment for optimal engraving and cutting results.
- Àmplia compatibilitat: 12V 3PIN design ensures compatibility with a broad range of laser engraving machines.
2. Configuració
2.1 Comprovació de compatibilitat
Before connecting the laser module, ensure it is compatible with your engraving machine.
- Consulteu el voltage parameter of your engraving machine:
The laser module requires a 12V 1.6A power adapter. Refer to the table below for compatibility solutions:
Mòdul làser màquina Solucions 12 V 12 V Connectar i jugar 12 V 24 V Si us plau, poseu-vos en contacte amb nosaltres - Check the port of the main control board on your engraving machine:
Locate the PWM port, GND port, and VCC port on your machine's main board. Connect the laser module accordingly.
màquina Mòdul làser Solucions 12V 3PIN 12V 3PIN Plug and Play 24V 3PIN Adaptador del controlador + font d'alimentació de 24 V 12V 2PIN 12V 3PIN Adaptador del controlador 24V 3PIN Adaptador del controlador + font d'alimentació de 24 V 24V 3PIN 12V 3PIN P-DA-01 Driver Adapter + 12V Power Supply 24V 3PIN Plug and Play 24V 2PIN 12V 3PIN P-DA-01 Driver Adapter + 12V Power Supply 24V 3PIN Adaptador del controlador
2.2 Instruccions de connexió
The laser module uses a 3PIN input interface. Ensure correct wiring to the main board.
If your machine's main board has different pin configurations, you may need a P-DA-01 Driver Adapter.
2.3 Ajust del focus
The laser module features an adjustable focus lens. Rotate the knob on the laser head to adjust the focal length for optimal performance.
Recommended Focal Lengths:
- For Engraving: 20mm
- For Cutting: 35mm (LT-40W-A-GOLD) or 50mm (general recommendation)
3. Instruccions de funcionament
3.1 Materials suportats
The laser module can engrave and cut a wide range of materials. Always test on a small, inconspicuous area first.
Materials de gravat:
- Wood, Paper, Leather, Bamboo, Plastic, Rubber, Alumina
- Ceramics, Bone, MDF, Coated glass, Mirror stainless steel, Plywood, Brushed stainless steel, Stone, Solid wood
Materials de tall:
- MDF, Pine board, Black acrylic, Plywood, Leather
3.2 Material Test Sheet (Optical Power > 5W)
Refer to the following table for engraving and cutting capabilities on different materials:
| Número | Material | Gravat | Tall |
|---|---|---|---|
| 1 | Contraxapat | ✓ | ✓ |
| 2 | MDF | ✓ | ✓ |
| 3 | Acrylic (Deep color) | ✓ | ✓ |
| 4 | Polièster | ✓ | ✓ |
| 5 | Texans | ✓ | ✓ |
| 6 | Paper | ✓ | ✓ |
| 7 | Lli | ✓ | ✓ |
| 8 | Rubber (Deep color) | ✓ | ✓ |
| 9 | Acer inoxidable | ✓ | ✗ |
| 10 | Ceràmica | ✓ | ✗ |
| 11 | Marbre | ✓ | ✗ |
| 12 | Granit | ✓ | ✗ |
| 13 | Ferro | ✓ | ✗ |
| 14 | Alumini anoditzat | ✓ | ✗ |
| 15 | coure | ✓ | ✗ |
| 16 | Plexiglass (Deep color) | ✓ | ✗ |
| 17 | Foam (Deep color) | ✗ | ✓ |
| 18 | Vidre | ✗ | ✗ |
3.3 Dades de rendiment
The laser module offers impressive performance for both engraving and cutting tasks.
Plywood Cutting Reference Test Data (LT-40W-A-GOLD):
| Contraxapat | Temps de tall | Potència làser | Velocitat de tall | Cara frontal | Edge | Gruix |
|---|---|---|---|---|---|---|
| 1 mm | 1 | 40W | 6 mm/s | |||
| 2 mm | 1 | 3.5 mm/s | ||||
| 3 mm | 1 | 2.5 mm/s | ||||
| 4 mm | 1 | 2 mm/s | ||||
| 5 mm | 1 | 1 mm/s | ||||
| 5 mm | 3 | 40W | 2 mm/s | |||
| 8 mm | 2 | 1 mm/s |
The module is capable of ultra-fast engraving on stainless steel at 30mm/s and can cut through 5mm plywood in a single pass.
3.4 Precaucions de seguretat
Always wear appropriate laser safety glasses when operating the laser module. Never look directly into the laser beam. Ensure proper ventilation in your workspace to dissipate fumes from cutting and engraving materials.
4. Manteniment
The laser module is designed for high reliability with a lifetime of up to 20,000 hours.
To ensure optimal performance and longevity, keep the laser lens clean and free from dust and debris. Use a soft, lint-free cloth and appropriate lens cleaning solution if necessary. Avoid touching the lens directly.
5. Solució De Problemes
Issue: The laser module is connected, the fan runs but the laser is not on.
Solucions:
- Check Signal Port (PWM) Match: Please check if the signal port (PWM) is well matched. If you are not sure which port on the main board is "PWM", please check with the main board seller.
- Power Cycle and Reconnect:
- Power off the engraving machine.
- Disconnect the cable of the laser module from the main board.
- Reconnect the laser head to the main board and restart your engraving machine.
For more information about maintenance or persistent issues, please contact us at lasertree@micost-optotech.com.
6. Especificacions
6.1 LT-20W-A Module Parameters
| Paràmetre | Valor | Paràmetre | Valor |
|---|---|---|---|
| Potència òptica | 4W(±0.5W) | Mida del mòdul | 35 * 35 * 95 mm |
| Entrada | 12V 1.6A | Pes del mòdul | 146 g |
| Longitud d'ona | 450nm(±10nm) | Module material | Aliatge d'alumini |
| Durada del focus | Ajustable | Interfície d'entrada | XH2.54-3P socket |
| Modulació PWM | Support 5V PWM modulation | Aplicació | Engraving / Cutting |
6.2 LT-40W-A-GOLD Module Parameters
| Paràmetre | Valor | Paràmetre | Valor |
|---|---|---|---|
| Effect output power | 40W | Potència ajustable | Support 5V PWM modulation |
| Energia elèctrica | 12V 1.8A (1.5A-2A) | Protecció de la unitat | Surge protection overvoltage protecció |
| Potència òptica de sortida | 5W | Control line installation | Endollable |
| Longitud d'ona | 450 nm | Interfície | Endoll XH2.54-3P |
| Color làser | Blau | Aplicació | Gravat |
| Material | Aliatge d'alumini | Pes del mòdul | 220 g |
| Heat sink size | 40 * 40 * 70 mm | Temperatura de funcionament | 0-70°C |
| Mida del ventilador | 40 * 40 * 20 mm | Freqüència de treball | 0-1000 Hz |
| Velocitat del ventilador | 9000 rpm | Modulació | 0/5-12V TTL/PWM |
6.3 Dimensions del mòdul
7. Consells d'usuari
- Tall de fusta: Yes, the LT-20W-A module can cut wood, particularly thinner plywood (1-2mm in one pass). For thicker wood, multiple passes or a higher power module like the LT-40W-A-GOLD may be required. Always refer to the Material Test Sheet for specific capabilities.
- Laser Pointer Use: These laser modules are designed for industrial engraving and cutting applications. They are not intended for use as handheld laser pointers due to their high power output and potential safety risks. Modifying the focus lens for such purposes is not recommended and can be dangerous.
8. Garantia i Suport
We stand by the quality of our products. This laser module is 100% original and guaranteed genuine.
- Devolució de 7 dies: Gaudeix de 7 dies per retornar-ho si tens algun problema de qualitat.
- Servei en línia: Timely customer service is available to solve various problems you may have.
For any questions or support, please feel free to contact us directly.
